• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.4
• /
• pp.287-294
• /
• 2006

The secondary correction of cleft lip nasal deformity (CLND) presents difficult surgical problems. Characteristically, nostrils are asymmetric. The present study was aimed to examine and compare the effect of Straith's alar web Z-plasty, Millard's alar web Z-plasty, alar web excision, and lateral V-Y advancement of the alar base for augmentation of the nostril with or without lengthening the columella in CLND. The subjects were 28 patients with unilateral cleft lip, who had secondary nostril correction. The nostril correction methods were Straith's alar web Z-plasty, Millard's alar web Z-plasty, alar web excision, and lateral V-Y advancement of the alar base. Facial photographs were taken before and 20 days after the operation. By using Adobe photoshop, the columella length and the nostril width were measured from the facial frontal photograph and Worm's eye view. The degree of improvement was calculated and statistically analyzed. The degree of improvement of the columella length using Straith's alar web Z-plasty was 70.20%. And then Millard's alar web Z-plasty was 55.01%, alar web excision was 39.93%, and lateral V-Y advancement of the alar base was 16.38% in order. The degree of improvement of the nostril size using lateral V-Y advancement of the alar base was 55.26%. And then alar web excision was 52.72%, Millard's alar web Z-plasty was 34.86%, and Straith's alar web Z-plasty was 16.06% in order. Straith's alar web Z-plasty and Millard's alar web Z-plasty resulted in elongation of the columella, equalization of asymmetrical nostril, and enlargement of small nostrils. Alar web excision enlarged nostrils and restored symmetry. Lateral VY advancement of the alar base increased nostril width and enlarged nostrils. These results indicate that the correction of nostrils improve the shape and the symmetry of the nostrils in CLND.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.388-393
• /
• 1999

In this study, the $CaSO_4:Eu$ TLDs are fabricated and their trap parameters are determined. The optimum concentration of Eu for fabrication of the $CaSO_4:Eu$ TLD is 0.5 mol% and optimum temperature is $600^{\circ}C$ for 2 hours sintering in air. The glow curve of $CaSO_4:Eu$ consists of two glow peaks and these peaks are isolated by thermal bleaching method. Trap parameters of two glow peaks are measured using the initial rise, the peak shape, the heating rate and the least square curve fitting methods. The activation energies of the glow peak I and II are 1.00 eV and 1.09 eV, and the frequency factors are $7.04{\times}10^{11}\;s^{-1}$ and $5.12{\times}10^{11}\;s^{-1}$ and the kinetic orders are 1.11 and 1.33, respectively.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.199-204
• /
• 2013

In this study, the reproducibility of blood alcohol concentration (BAC) - time profile for the same individuals were investigated. Five Korean males were made to drink 55.5 g of ethyl alcohol (neglecting body weight) in the form of undiluted Soju (22% v/v), Korean popular liquor, within 30 min and each drinking sessions were performed for five times. Two kind of side dishes, a sliced raw fish and a sweet and sour pork, were served alternately along with alcohol. The peak BAC reaching time, the maximum BAC and the reduction rate of BAC of an individual varied greatly even though the dose and drinking time interval were not changed. Also, the food taken along with alcohol varies the shape of BAC - time profile. From the repetitive drinking sessions we can know that the BAC - time profile of an individual is not a reproducible one even though the dose, kind of liquer, drinking time and food were maintained constantly. It means that any assumption of blood alcohol concentration of an individual at a previous time stage based on the alcohol dose can not be justified because of large fluctuation of BAC-time profile of an individual.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1555-1562
• /
• 2015

Metal oxide semiconductors have been applied in several areas, such as solar cells, sensor, optical elements and displays, due to the high surface area, unique electrical and optical characteristics. Zinc oxide among the metal oxide has excellent physicochemical properties. Zinc oxide is a n-type semiconductor with a wide direct transition band gap of 3.37 eV at room temperature and large exciton binding energy of 60 meV. Cation-doped zinc oxide studies were conducted to complement the electrical and optical characteristics. In this paper, Al-doped ZnO was synthesized by hydrothermal synthesis using microwaves. ZnO was synthesized by adjusting the precursor ratio and using different dopants. The optimal ZnO synthesis conditions for crystal shape and optical properties were determined. The optical properties of aluminum doped zinc oxide were then examined by SEM, XRD, PL, UV-vis absorbance spectrum, and EDS.

• Korean Journal of Materials Research
• /
• v.18 no.10
• /
• pp.535-541
• /
• 2008

Growth behavior of InGaN/GaN self-assembled quantum dots (QDs) was investigated with respect to different growth parameters in low pressure metalorganic chemical vapor deposition. Locally formed examples of three dimensional InGaN islands were confirmed from the surface observation image with increasing indium source ratio and growth time. The InGaN/GaN QDs were formed in Stranski-Krastanow (SK) growth mode by the continuous supply of metalorganic (MO) sources, whereas they were formed in the Volmer-Weber (V-W) growth mode by the periodic interruption of the MO sources. High density InGaN QDs with $1{\sim}2nm$ height and $40{\sim}50nm$ diameter were formed by the S-K growth mode. Dome shape InGaN dots with $200{\sim}400nm$ diameter were formed by the V-W growth mode. InN content in InGaN QDs was estimated to be reduced with the increase of growth temperature. A strong peak between 420-460 nm (2.96-2.70 eV) was observed for the InGaN QDs grown by S-K growth mode in photoluminescence spectrum together with the GaN buffer layer peak at 362.2 nm (3.41 eV).

• Korean Journal of Plant Taxonomy
• /
• v.52 no.4
• /
• pp.226-234
• /
• 2022

The study aims are to examine the characteristics of artificial and natural hybrids between Viola albida var. albida (= albida, from below) and V. albida var. chaerophylloides (= chaerophylloides, from below), and to confirm if hybrids could be fertile and make populations in their native habitats. The 1st filial (= F₁, from below) leaf shape produced by artificial crossing between albida and chaerophylloides was the same as that of V. albida var. takahashii (= takahashii, from below), and F₁ bore also both chasmogamous and cleistogamous flowers. F₁ seed number was 9.6 per cleistogamous pods, which was remarkably less than the average of 38.2 for albida and chaerophylloides, but the germination rate was all similar. The leaf type of self-crossed 2nd offsprings (= F₂, from below) showed all leaf types found in the Viola albida complex, but the ratio of chaerophylloides leaf type was relatively low. Individuals whose F₂ leaf type was restored to albida produced an average of 31.4 seeds per capsule, meaning that fertility was restored. On the other hand, individuals of F₂ takahashii leaf type come to fruition a low average of 10.4 seeds per capsule, which is similar to that of takahashii. The results of crossbreeding experiment, where is their native habitats, were similar to that of laboratory. Both albida and chaerophylloids in Mt. Bulmyeong distribute extensively, but takahashii make a small population only in places where albida and chaerophylloides grow together. Summarizing the above results is suggesting that the speciation of takahashii was done by hybrid between albida and chaerophylloides, and these have been maintained with relatively small population by cleistogamous capsules.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.34-41
• /
• 2023

In recent years, as the range of human activities has increased, the introduction of alien species has become frequent. Among them, raccoons have been designated as harmful animals since 2020. Raccoons are similar in size and shape to raccoon dogs, so they generally need to be distinguished in capturing them. To solve this problem, we use VGG19, ResNet152V2, InceptionV3, InceptionResNet and NASNet, which are CNN deep learning models specialized for image classification. The parameters to be used for learning are pre-trained with a large amount of data, ImageNet. In order to classify the raccoon and raccoon dog datasets as outward features of animals, the image was converted to grayscale and brightness was normalized. Augmentation methods were applied using left and right inversion, rotation, scaling, and shift to create sufficient data for transfer learning. The FCL consists of 1 layer for the non-augmented dataset while 4 layers for the augmented dataset. Comparing the accuracy of various augmented datasets, the performance increased as more augmentation methods were applied.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1962

The objects of this experiment are to find out the local variation of the Dendrolimus Spectabilis Butler, of which sample was first collecteted 15 bodies of male and 35 bodies of female adult at Suwon area. the wing veins and the scale shape have been observed through the microscope (100) and the scale size (from the bottom of the scale to the top of the lobe) has also been measured by the micrometer. The results of this experiment are as follows: 1. There is nodifference between the venation of the male body and that of the female body. Also we can not find any differences between the right and the left wing, and between each body. The fore wings consit of 13 longitudinal veins and the only one "V" shape cross vein which is between the 5th and 6th vein. The hind wings consist of 9 longitudinal veins and the only one "V" shape cross vein which is mentioned above. 2. The scale types are divided into 4 Groups in its shape. (A) The scales of I Group are short and the lower parts of them almost look like a circle, having a small projection at their bottom. The upper parts of them have 2 or 10 lobes. We can find the lobes with fine hairs or the lobes without them at the top of the scales. (B) The scales of II Group are longer than that of I Group. The shape of the lower parts of the scales is similar to that of I Group. The upper parts of the scales have 2 or 10 lobes. (C) The scales of III Group are long and almost alike in a long wedgeshape. The upper parts of the scales have 2 Or IO lobes and we can find long fine hairs at the top of each lobe. (D) The scales of IV Group are long and the shape of the lower parts of the scales is similar to that of III Group. The lobes are short and not sharp. We can find 2 or 9 lobes. 3. The scales of I Group and II Group are distributed on the whole surface except on the outer margin. The most scales of III Group are distributed on the wing base. The scales of IV Group are distributed on the outer margin only. The scales with 4 or 5 lobes are most widely distributed not considering their Group or distributing parts. 4. In I Group the variation of the scale length become gradually greater as the number of the lobes are increasing. In II, III, IV Group, however, the variation of the scale length is in direct opposition to the above mentioned. The variation of the scale width becomes pretty small in any Groups and the scale width become wider as the number of the lobes are increasing. 5. The source of the wing colouration is pigmnetal colour, and the wing colouration is expressed by the amount of brown and white scales.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.419-428
• /
• 2020

The flow past a wall mounted square cylinder, a typical and basic shape of building, bridge or offshore structure, was simulated using URANS computation through adoption of three turbulence models, namely, the k-ε model, k-ω model, and the v²-f model. It is well known that this flow is naturally unstable due to the Karman vortex shedding and exhibits a complex flow structure in the wake region. The mean flow field including velocity profiles and the dominant frequency of flow oscillation that was from the simulations discussed earlier were compared with the experimental data observed by Wang et al. (2004; 2006). Based on these comparisons it was found that the v²-f model is most accurate for the URANS simulation; moreover, the k-ω model is also acceptable. However, the k-ε model was found to be unsuitable in this case. Therefore, v²-f model is proved to be an excellent choice for the analysis of flow with massive separation. Therefore, it is expected to be used in future by studies aiming to control the flow separation.