• 전기의세계
• /
• v.31 no.6
• /
• pp.445-449
• /
• 1982

This Paper describes the influence of additive concentrations and sintering temperature on the surge protection performance in ZnO ceramic varistors. It is found from the experiments that the metal-oxide semiconductors based oi ZnO with an additive incorporation of 0.50% molx(Bi$\_$2/O$\_$3/+MnO+CoO+Cr$\_$2/O$\_$3/+2Sb$\_$2/O$\_$3/) and sintered at 1250.deg. C present excellent V-I characteristics in view of transient surge suppression. Gapless arrester element with aluminum electrodes shows also good reliability against impulse shock and marks a low voltage clamping ratio(V$\_$1KA/V$\_$1mA/<2.0) compared with the conventional SiC varistors.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.12
• /
• pp.20-27
• /
• 1997

In this paper, a multiplying digital-to-analog converter (MDAC) circuit for low-power high-resolution CMOS algorithmic A/D converters (ADC's) is proposed. The proposed MDAC is designed to operte properly at a supply at a supply voltge between 3 V and 5 V and employs an analog0domain power reduction technique based on a bias switching circuit so that the total power consumption can be optimized. As metal-to-metal capacitors are implemented as frequency compensation capacitors, opamps' performance can be varied by imperfect process control. The MDAC minimizes the effects by the circuit performance variations with on-chip tuning circuits. The proposed low-power MDAC is implementd as a sub-block of a 10-bit 200kHz algorithmic ADC using a 0.6 um single-poly double-metal n-well CMOS technology. With the power-reduction technique enabled, the power consumption of the experimental ADC is reduced from 11mW to 7mW at a 3.3V supply voltage and the power reduction ratio of 36% is achieved.

• Journal of Mushroom
• /
• v.17 no.3
• /
• pp.126-131
• /
• 2019

This study sought to identify the optimum substrate composition for the stable bottle cultivation of Sparassis latifolia. The main substrate was fermented larch sawdust. Six nutrient sources were mixed at a maximum volume ratio of 20%. The fresh weight of fruit body was the highest at 128.5 g for GMSL69033 and 126.6 g for 'Neoul' in the treatments of beet pulp and corn flour in a volume ratio of 15:5. In addition, the total cultivation period was 94 days, which was shorter than that required for other treatments. The selected substrate characteristics were pH 4.7, C:N (carbon to nitrogen) ratio of 106:4, moisture content of 70%, and air filling porosity of 38%. We plan to develop new income items through research on mycelial incubation and fruit body growth conditions.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2009

This study is aimed to derive the optimum mix proportion of the combined self compacting concrete according to cement types (blast-furnace slag cement and belite cement) and to propose the basic data to field construction work after evaluating the quality properties. Specially, lime stone powder (LSP) as binder and viscosity agent are used in the combined self compacting concrete because slurry wall of an underground LNG storage tank should be kept stability of quality during concrete working. Replacement ratio of LSP is determined by confined water ratio test and main design factors including fine aggregate ratio ($S_r$), coarse aggregate ratio ($G_v$) and water-cement ratio (W/C) are selected. Also, quality properties including setting time, bleeding content, shortening depth and hydration heat on the optimum mix proportion of the combined self compacting concrete according to cement type are compared and analyzed. As test results, the optimum mix proportion of the combined self compacting concrete according to cement type is as followings. 1) Slag cement type-replacement ratio of LSP 13.5%, $S_r$ 47% and W/C 41%. 2) Belite cement type-replacement ratio of LSP 42.7%, Sr 43% and W/C 51%. But optimum coarse aggregate ratio is 53% regardless of cement types. Also, as test results regarding setting time, bleeding content, shortening depth and hydration heat of the combined self compacting concrete by cement type, belite cement type is most stable in the quality properties and is to apply the actual construction work.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.1
• /
• pp.59-69
• /
• 1999

AlN thin films were fabricated by reactive sputtering for the application of MIS devices with Al/AlN/Si structure. It has investigated the surface morphology change, I-V characteristics, C-V characteristics, and chemical composition of AlN films with the intriducing time of hydrogen on the fixed deposition condition(RF power: 150W, sputtering pressure: 5mTorr, flow rate ratio of $Ar/N_2=1$, hydrogen concentration: 5%). By addition of the hydrogen the deposition rate decreased drastically whereas the surface morphology changed little. It has been found from the analysis of I-V and C-V characteristics curves that the films deposited with hydrogen addition in initial stage had lower leakage current density, lower flat band voltage and hystersis profile when compared with those with hydrogen addition in last stage. The oxygen concentration in AlN films decreased with addition of hydrogen gas, which suggesting a profitable role in the insulation and C-V characteristics of AlN films.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.253-258
• /
• 2006

We have fabricated vortical type organic thin film transistors (OTFTs) consisting of ITO/n type active material/Al gate/n type active material/Al using F16CuPc, NTCDA, PTCDA and PTCDI C-8. The effect of mobility of n type active materials and thin film thickness on current-voltage (I-V) characteristics and on/off ratios were investigated. The vortical type organic transistor using PTCDI C-8 exhibited low operation voltage and high on-off ratio. In addition, we have investigated the feasibility of application in organic light emitting transistor using light emitting polymer. Especially, the light emitting transistor consisting of ITO/PEDOT-PSS/P3HT/F16CuPc/Al gate/F16CuPc/Al showed the maximum quantum efficiency of 0.054.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.303-306
• /
• 2011

[ $V_2O_5$ ]doped Karrooite pigments were synthesized by the solid state method to get stabilized brown pigment in oxidation and reduction atmosphere. Optimum substitution condition and limited dopant with $V_2O_5$ for Karrooite pigment was investigated. With calcination at $1250^{\circ}C{\sim}1400^{\circ}C$, compositions were designed varying $V_2O_5$ molar ratio by increasing 0.02mole to the formula $Mg_1-xTi_2-xM_{2x}O_5$(x = 0.01~0.09 mole). Synthesized pigments were analyzed by XRD, Raman spectroscopy and UV-vis. When $V_2O_5$ was doped from 0.01 to 0.05 mole, single phase of Karrooite was observed at temperature $1300^{\circ}C$ and soaking time 4h by Raman spectroscopy. However, it was found that excess $VO_2$ peak appeared with 0.07 and 0.09 mole of $V_2O_5$ doped to $MgTi_2O_5$. This result indicated that the maximum limit of solid solution is 0.05 mole $V_2O_5$. Karrooite pigments were applied as a ceramic pigment to achieve brown colors in lime magnesia glaze and lime barium graze at both of oxidation and reduction atmosphere. CIE color coordinates are $L^*$ = 40.34, $a^*$ = 9.94, $b^*$ = 21.40 in lime magnesia glaze.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.708-713
• /
• 2013

KARI is developing a solar-electric powered HALE UAV(EAV-3). For demonstrating the technology, EAV-2H, a down-scaled version of EAV-3, is developed and after EAV-2H's initial flight test, the directional stability and control need to be improved. Thus, the vertical tail and rudder of EAV-2H are redesigned with Advanced Aircraft Analysis(AAA). Size of the rudder is increased from mean chord ratio of rudder to vertical tail, $C_r/C_v(%)=30$ to $C_r/C_v(%)=60$ and size of the vertical tail is reduced 15%. As a result, the directional control to side wind($v_1$) is improved to sideslip angle, ${\beta}(deg)=25^{\circ}$ and $v_1(m/sec)=3.54$. Also, variation of airplane side force coefficient with sideslip angle ($C_{y_{\beta}}$) and variation of airplane side force coefficient with dimensionless rate of change of yaw rate ($C_{y_r}$) are reduced 15% and 22%, respectively to minimize the effect of side wind. The empennage design of EAV-2H is verified with flight tests and applied to design of KARI's solar-electric-powered EAV-3.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.681-684
• /
• 2001

Pseudomonas sp. F721 isolated from soil produced a substance related in seeds germination inhibition. Addition of phytohormone, and GA (gibberellin acid) in the culture broth elevated production of the germination inhibition substance. The production of the substance was optimized in the culture conditions of $35^{\circ}C$, pH 9.0, 150 rpm, 48 hr, glucose 0.5% (w/v), and innoculation ratio 1.0% (v/v). The physical and chemical stability of the substance in the variety of pH ranging from 2.0 to 12.0 and from freezing to $100^{\circ}C$ were shown. The germination inhibition substance suppressed 90% of germination compared with that of the control experiment in a few days.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.567-570
• /
• 2000

The condition of immobilization of the partially purified levan fructotransferase and the properties of the immobilized enzyme was investigated. Levan fructotransferase was immobilized on ${\kappa}\;-carrageenan$ beads by entrapment method. The optimal ${\kappa}\;-carrageenan$ concentration was obtained 2%(w/v) (or the matrix. At that time, immobilized enzymes(0.81 units) have relative low activity compare with soluble enzyme(7.7 units). To immobilized and soluble enzyme, optimal activity temperature and pH were measured $55^{\circ}C$, 6.0 in sodium phosphate buffer 20mM solution. If crosslinking agent was added, proper concentration was 0.5%(v/v). At $37^{\circ}C$, immobilized and soluble enzyme converted levan to oligofructose and DFA IV, and the conversion ratio was 32% and 61% at 60 hr.