• Journal of Life Science
• /
• v.28 no.8
• /
• pp.969-976
• /
• 2018

In this study, transglucosidase (TG), an enzyme produced by Aspergillus niger, synthesized isomaltooligosaccharide from ${\alpha}-(1{\rightarrow}4)$ linked substrates. The highest TG-producing A. niger KCTC6913 was selected from six kinds of species, and optimized TG producing conditions were established. Five different carbon sources (potato starch, sweet potato starch, corn starch, wheat starch, and dextrin) and three different nitrogen sources (yeast extract, malt extract, and beef extract) were tested to establish the carbon and nitrogen sources favorable for TG production. Measurements of TG activity after an initial culture at pH 5.0 for 15 days revealed that potato starch and yeast extract, which are basic culture media, resulted in the highest TG activity. In addition, A. niger KCTC6913 increased TG production under aerobic conditions and a controlled carbon/nitrogen ratio. In conclusion, to evaluate TG activity in the established optimal medium, it is confirmed that the basal and potato dextrose broth medium were used as a control, and the highest TG production was measured, which was highlighted in the established optimal medium.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.652-659
• /
• 1999

The trend of poisoning of reforming catalyst along with the position of anodic catalyst bed was studied. Keeping the conditions that steam to carbon ratio was 2.5, operating voltage was 0.75 V, current density was $140mA/cm^2$, the unit cell was operated during 24 hrs at a steady state. And then the cell was stopped, the catalysts packed in the position of inlet, middle and outlet were sampled individually and then the amount of carbon, Li and K poisoned were analysed. After 100 hrs operated, the catalysts at the same positions were analysed at the same manner. The result of this experiment was as followings. After 24 hrs operated, the poisoning amounts of Li and K in the catalyst were 0.27 wt% at inlet, 0.23 wt% at middle and the highest value 1.59 wt% at outlet. After 100 hrs, the amount of poisoning is the highest in the catalyst packed at the inlet of unit cell. The performance simulation of unit cell explained these trends of poisoning catalysts. The simulation told that the catalyst in the region of the inlet of unit cell treated the 90% of initial methane flow rate and the highest electrochemical reaction happened in this region. So the catalysts of this region were the most poisoned with carbon, Li and K and also the rate of poisoning is faster than that of the catalyst at other regions. The temperature at the region of outlet of unit cell was $30^{\circ}C$ higher than that of other regions, so more Li, and K vaporized than at other regions and little reforming reaction at this region made the catalysts poisoning rate low.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.31-39
• /
• 2005

This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.

• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.689-696
• /
• 2009

In this study, electro-deposition method was applied to heal cracks in various blended concrete. The performance of the method was indirectly monitored by measuring impressed voltage, electrolyte, galvanic current monitoring, linear polarization resistance, and directly by image analysis of the cracks. The indirect and direct monitoring values are compared to develop guidelines for relating the indirect measures to actual crack healing. As a result, It was found that impressed voltage was convergence to 2.9V after 20000 minutes. From the galvanic current test results of artificial crack healing, the corrosion resistance showed that the order of 0.4 $>$ 0.6 $>$ 0.5 water to cement ratio. Furthermore, in view of binder, the corrosion resistance order was calculated OPC $>$ 60%GGBS $>$ 10%SF $>$ 30%PFA. Finally, It was found that 76.47% of healed crack surface calculated from the artificial crack healing technique using electrochemical deposition method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.443-451
• /
• 2010

This paper describes a fully integrated CMOS low-IF mobile-TV RF tuner for Band-III T-DMB/DAB applications. All functional blocks such as low noise amplifier, mixers, variable gain amplifiers, channel filter, phase locked loop, voltage controlled oscillator and PLL loop filter are integrated. The gain of LNA can be controlled from -10 dB to +15 dB with 4-step resolutions. This provides a high signal-to-noise ratio and high linearity performance at a certain power level of RF input because LNA has a small gain variance. For further improving the linearity and noise performance we have proposed the RF VGA exploiting Schmoock's technique and the mixer with current bleeding, which injects directly the charges to the transconductance stage. The chip is fabricated in a 0.18 um mixed signal CMOS process. The measured gain range of the receiver is -25~+88 dB, the overall noise figure(NF) is 4.02~5.13 dB over the whole T-DMB band of 174~240 MHz, and the measured IIP3 is +2.3 dBm at low gain mode. The tuner rejects the image signal over maximum 63.4 dB. The power consumption is 54 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.53.2-53.2
• /
• 2010

지금까지 능동 구동 디스플레이의 TFT backplane에 사용하고 있는 채널 물질로는 수소화된 비정질 실리콘(a-Si:H)과 저온 폴리실리콘(low temperature poly-Si)이 대표적이다. 수소화된 비정질 실리콘은 TFT-LCD 제조에 주로 사용되는 물질로 제조 공정이 비교적 간단하고 안정적이며, 생산 비용이 낮고, 소자 간 특성이 균일하여 대면적 디스플레이 제조에 유리하다. 그러나 a-Si:H TFT의 이동도(mobility)가 1 cm2/Vs이하로 낮아 Full HD 이상의 대화면, 고해상도, 고속 동작을 요구하는 UD(ultra definition)급 디스플레이를 개발하는데 있어 한계 상황에 다다르고 있다. 또한 광 누설 전류(photo leakage current)의 발생을 억제하기 위해서 화소의 개구율(aperture ratio)을 감소시켜야하므로 패널의 투과율이 저하되고, 게이트 전극에 지속적으로 바이어스를 인가 시 TFT의 문턱전압(threshold voltage)이 열화되는 문제점을 가지고 있다. 문제점을 극복하기 위한 대안으로 근래 투명 산화물 반도체(transparent oxide semiconductor)가 많은 관심을 얻고 있다. 투명 산화물 반도체는 3 eV 이상의 높은 밴드갭(band-gap)을 가지고 있어 광 흡수도가 낮아 투명하고, 광 누설 전류의 영향이 작아 화소 설계시 유리하다. 최근 다양한 조성의 산화물 반도체들이 TFT 채널 층으로의 적용을 목적으로 활발하게 연구되고 있으며 ZnO, SnO2, In2O3, IGO(indium-gallium oxide), a-ZTO(amorphous zinc-tin-oxide), a-IZO (amorphous indium-zinc oxide), a-IGZO(amorphous indium-galliumzinc oxide) 등이 그 예이다. 이들은 상온 또는 $200^{\circ}C$ 이하의 낮은 온도에서 PLD(pulsed laser deposition)나 스퍼터링(sputtering)과 같은 물리적 기상 증착법(physical vapor deposition)으로 손쉽게 증착이 가능하다. 특히 이중에서도 a-IGZO는 비정질임에도 불구하고 이동도가 $10\;cm2/V{\cdot}s$ 정도로 a-Si:H에 비해 월등히 높은 이동도를 나타낸다. 이와 같이 a-IGZO는 비정질이 가지는 균일한 특성과 양호한 이동도로 인하여 대화면, 고속, 고화질의 평판 디스플레이용 TFT 제작에 적합하고, 뿐만 아니라 공정 온도가 낮은 장점으로 인해 플렉시블 디스플레이(flexible display)의 backplane 소재로서도 연구되고 있다. 본 실험에서는 rf sputtering을 이용하여 증착한 a-IGZO 박막에 대하여 열처리 조건 변화에 따른 a-IGZO 박막들의 광학적, 전기적 특성변화를 살펴보았고, 이와 더불어 a-IGZO 박막을 TFT에 적용하여 소자의 특성을 분석함으로써, 열처리에 따른 Transfer Curve에서의 우리가 요구하는 Threshold Voltage(Vth)의 변화를 관찰하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.837-844
• /
• 2017

Generally, V/C ratio in uninterrupted traffic flow and average travel speed in interrupted traffic flow are utilized as measure of effect for assessing operational situation of roads. The set of road conditions and traffic conditions are considered to be major variables for assessing operational situation in the traffic flow. However, weather conditions such as rainfall also affect the operational situation of roads. The studies reflected by the rainy situation are conducted in the uninterrupted flow, but the related studies are insufficient in the interrupted flow. In this study, the modification factors during rainfall in the interrupted flow were suggested, and the factors could be used when calculating the average travel speed during rainfall in the interrupted flow. By utilizing the data that were investigated in the same road and traffic conditions and the different weather conditions (rainy day or clear day), the modification factors were founded on regression analysis of the travel speed during rainfall as a dependent variable. Modification factors was suggested in dividing peak time, non-peak time, and whole period. Based on this study, the modification factors can be used to complementing the average travel speed model for assessing the operational situation of urban streets during rainfall.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.20-20
• /
• 2008

최근 LEDs가 동일 효율의 전구에 비해 에너지 절감 효과 크며 신뢰성이 뛰어나다기 때문에 기존 광원을 빠르게 대체해 나가고 있다. 특히 자외선 파장을 가지는 LEDs는 발열이 낮아 냉각장치가 필요 없으며, 수명이 길어 기존 UV lamp에 비해 많은 장점을 가지고 있기 때문에 많은 관심을 밭고 있다. 그럼에도 불구하고 자외선 LEDs는 제조 단가가 높고 power가 낮아 소요량이 많은 등 아직 해결해야 할 부분이 많기 때문에 이를 해결하기 위해 여러가지 재료와 다양한 구조가 고려되고 있다. 그 중 ZnO는 II-VI족 화합물 반도체로써 UV영역의 넓은 밴드갭(3.37eV)을 가지는 투명한 재료이다. 특히 ZnO는 60meV의 큰 엑시톤 결합에너지를 가지며, 가시광 영역에서 높은 투과율을 가지고, 상온에서 물리적, 화학적으로 안정하기 때문에 UV sensor, UV laser, UV converter, UV LEDs 등 광소자 분야에서 연구가 활발히 진행되고 있다. ZnO가 광소자의 발광재료로써 높은 효율을 얻기 위해서는 결정성을 높여 내부 결함을 감소시키며, 발광 면적을 높일 수 있는 구조가 요구된다. 특히 MOCVD 법으로 성장한 나노막대는 에피성장되어 높은 결정성을 기대할 수 있으며, 성장 조건을 조절함으로써 나노막대의 aspect ratio와 밀도 제어할 수 있기 때문에 표면적을 효과적으로 넓혀 높은 발광효율을 얻을 수 있다. 본 실험에서는 MOCVD 법으로 실리콘과 사파이어 기판 위에 다양한 성장 온도를 가진 나노구조를 성장 시키고 온도에 따른 형상 변화와 특성을 평가하였다. ZnO 의 성장온도가 약 $360^{\circ}C$ 일 때, 밀도가 조밀하고 기판에 수직 배열한 균일한 나노막대가 성장되었으며 우수한 결정성, 광학적 특성이 나타남을 SEM, TEM, PL, XRD를 사용하여 확인하였다.

• Journal of Korean Academy of Nursing
• /
• v.4 no.2
• /
• pp.32-43
• /
• 1974

A steady increase in the aged population poses a great challenge to nurses with their diversities of health care needs, especially of psychological nature, such as an alienation problems among the aged. The purpose of this study is to examine the nature of alienation problems among the aged in urban areas to provide basic informations for a better understanding of aged people. In this study, the investigator has tried to identify causes of alienation in the aged, and to determine the extent of alienation in relation to sex, family structure, religion, economic status and participation in social activities. The survey was done during the period from the last part of August to the end of September 1973. After a day's training, 10 interviewers have interviewed 210 stratified random samples of people over the age of 65 residing in Seoul with the free-ended questionnaire prepared by the investigator. The result of the study was tested by Critical Ratio. Following Hypothesis have guides formulation of the study: I. The extent of alienation in old man would be higher than in old woman, II. The extent of alienation in the aged who live alone would be higher than those living with their family. III. The extent of alienation in the aged who have no spouse would be higher than who live with their spouse. IV. The extent of alienation in the people without religious beliefs would be higher than the people with religious biles. V. The extent of alienation in the aged would be higher in proportion to decreased level of their economic productivity. Ⅵ. The extent of alienation in the aged who do not participate in social activities would be higher than that of the aged who actively participate. The analytic results of the study are as fellows: 1. The extent of alienation in woman was revealed higher than that of man by showing significant difference at P〈0.01 level. (CR=3.66) Accordingly hypothesis I was denied. 2. The extent of alienation in the aged wile live alone was revealed higher than that of the aged who live with their family by showing a significant difference at P<0.01 level. (CR=7.31) So hypothesis II was supported. 3. The extent of alienation of the aged who have no spouse was revealed higher than that of the aged who live with their spouse at the significant level of P <0.01. CR=4.65) Accordingly hypothesis III was supported, 4. There was no significant difference in the extent of alienation between the people with and-without religion. Thus hypothesis IV was rejected. 5. The extent of alienation in the aged was found to be higher in proportion to decreased level of their economic ability. a. The aged with greatest income showed least alienation b. The aged with no income had a greater extent of alienation than the aged with minimal income by showing significant difference at P <0.01 level . (CR=4.82) c. The difference between the greatest income group and the minimal income group was. found to be less significant than the difference between minimal income group and the-people without income. Thus hypothesis V was positively supported. 6. The extent of alienation in the aged who do not participate in social activities was higher than that of the aged who actively participate. (P <0.01, CR=6.24) According1y hypothesis Ⅵ was supported.

• Korean Journal of Animal Reproduction
• /
• v.20 no.3
• /
• pp.239-250
• /
• 1996

The objective of the present experiments were to determine whether micromanipulative and electro-stimulation conditions for blastomere survival overlapped those for oocyte activation in porcine. Eggs selected for in vitro development potential of blastomeres isolated from 4-cell embryos and oocyte activation by electrostimulation were equilibrated for 5~10 min, in 0.3M sucrose solution containing 7.5$\mu\textrm{g}$/ml cytochalasin B, and then electrostimulated for 30$\mu$sec using one pulse of 100, 120, 150 or 180 volts DC with electrodes 0.2mm apart. Single blastomeres were inserted into empty zona pellucida prior to electrostimulaticn. Then they were cultured in 20${mu}ell$ drops of fresh BECM to observe their developmental ability in vitro in a humidified incubat or at 38.5$^{\circ}C$. The results obtained from these experiments are as follows : 1. When one pulse of 100, 120, 150 or 180 volts DC for 30$\mu$sec were applied to porcine oocytes having the slit formed on zona pellucida for activation, activation rates were 65.1, 66.7, 70.7 and 91.7%, respectively. Higher activation rate was observed in 180V. 2. Infact oocytes incubated for 30 min, in 0.3M sucrose solution after electrostimulation were significantally different from control group with increasing of voltages(p<0.05). When voltages used for electrostimulation were increased, activation rates of oocytes were improved in all treatment groups. 3. When zona punctured-oocytes were only electrostimulated, or incubated in 0.3M sucrose solution for 30 min. after electrostimulation at 180 volt DC, activation rates were 90.5 and 95.5%, respectively. And activation rates of zona punctured-oocytes were significantly different from the groups for which zona pellucida was not punctured(P<0.05). 4. When single blastomeres form 4-cell transferred into empty zona pellucida were incubated for 0, 15 and 30 min. in 0.3M sucrose solution after electrostimulation using one pulse of 180 volt DC for 30 $\mu$sec, developmental rates of electrostimulated-single blastomeres to blastocyst were 72.5, 59.0 and 51.2%, respectively, and the ratio of control group developed to blastocyst were 80.0%. 5. The average cell number in electrostimulated-blastomeres developed to blastocyst were 7.9~10.8, and reduced than the cell number in diploid control ; Also cell number decreased with increasing of voltages. The results of these experiments indicate that the optimal condition for achieving in vitro developmental ability of single 4-cell blastomeres and oocyte activatin is 1 pulse, duration 30 $\mu$sec. in 180 volt, and incubation of blastomeres and oocytes in 0.3M sucrose solution after electrostimulation was not significantally different from another treatment groups. The results also show that this condition is suitable for nuclear transplantation using porcine eggs.