• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1718-1726
• /
• 2010

Utilization of renewable energy is becoming increaingly important from the viewpoints of environmental protection and conservation of fossil fuel. However, the generating power of renewable energy is always fluctuating due to the environmental status. This paper presents a scheme for supervisory control of wind generation system with the energy storage and STATCOM to reduce the power variation. In this paper, we especially concentrate on constant power output control of wind generation system. In order to achieve this purpose, the coordinated control strategy between different types of energy storage system and reactive power compensation device. The proposed control scheme has been validated by PSCAD/EMTDC simulation. As a result, the proposed scheme can handle the power output of wind generation system with a constant value.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.195-206
• /
• 1995

Higher utilization of warehouse space can be achieved by using automated mobile racking systems. Therefore, those systems may be employed for factories or distribution centers as a good option of increasing the storage capacity. In this paper, travel-time models are developed to estimate the average performance of the system assuming randomized storage. Expected travel times are determined for both single- and dual-command cycles. Two extreme input/output-point locations are considered. Some numerical results obtained from the models are given.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.1
• /
• pp.137-144
• /
• 1998

Block stacking, which involves the storage of unit loads in stacks within storage rows, is typically used in traditional warehouses to achieve a high space utilization at a low investment cost. In this paper, assuming that the demand size from a customer is an i.i.d. random variable, we develop a probabilistic block stacking storage model and its algorithm for a singles product, which minimizes the time-overage floor space requirement under an (s, S) inventory policy and the violation of the FIFO lot rotation rule only in a single partially-occupied row.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.5
• /
• pp.336-344
• /
• 2023

This study aimed to investigate the effects of Centella asiatica powder on the quality characteristics and storage stability of goat meat Tteokgalbi. The goat meat Tteokgalbi samples were prepared with four different quantities (0, 0.5, 1, and 1.5%) of Centella asiatica powder. The moisture content of the samples containing Centella asiatica powder was significantly lower than that of the control (p<0.05). The protein content of the samples containing Centella asiatica powder was significantly higher than that of the control (p<0.05). As the proportion of Centella asiatica powder increased, the pH, L^*, and a^* values of the uncooked and cooked samples decreased (p<0.05). The water holding capacity and the cooking yield of the uncooked and cooked samples were higher in the samples containing Centella asiatica powder than in the control (p<0.05). Also, with the increasing amounts of the Centella asiatica powder, the thiobarbituric acid reactive substance (TBARS) levels decreased. The 1-1.5% Centella asiatica powder group showed lower levels of volatile basic nitrogen (VBN) than the other groups as per the assay (p<0.05). The results indicate that Centella asiatica powder could enhance the quality characteristics and storage stability of goat meat Tteokgabi.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.517-523
• /
• 2016

South Korea is the 8th biggest greenhouse gas emitter in the world due to its phenomenal economic growth based on manufacturing, and it is ranked first among OECD members for the rate of increase in emissions. Thus, the Korea government has voluntarily presented a reduction target and demonstrated global leadership. For the reduction of nation's GHG emission, importance of CCU(Carbon Capture and Utilization) along with CCS(Carbon Capture and Storage) technology development is increased. CCU technology is $CO_2$ utilization technology for the usage of $CO_2$ from flue gas and it can create a new economic value while reducing $CO_2$ emission. Therefore, with continued technology development, the number of application of CCU technology is increasing globally.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.4
• /
• pp.232-238
• /
• 1988

As a part of the studies on effective utilization of polyunsaturated lipids in sardine (Sardinops melanosticta), when the refined sardine oil was mixed with soybean and other vegetable oils storage stability and the effect to the quality of the product was investigated. Addition of 1 volume of refined sardine oil to 4 volumes of soybean oil was recommended to yield 3 in P/S ratio and 1.5g of eicosapentaenoic and docosahexaenoic acid per 40g of the mixed oil for a good storage stability and as a dietary source of EPA requirement for atherosclerotic disease. When the unpurified vegetable oils, sesame oil and perilla oil, were mixed with the same volume of refined sardine oil the content of n-3 fatty acids was increased to $13.36\%\;and\;30.65\%\;%\;from\;0.27\%$ in sesame oil and $29.72\%$ in perilla oil. The n-3/n-6 ratios were also raised to 0.476 and 1.433 from 0.006 and 0.876. And these mixed oils were more stabilized than the refined sardine oil during storage at $30^{\circ}C$.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.3-8
• /
• 2006

The heat pump system is attractive alternatives to conventional heating and cooling systems owing to their higher energy utilization efficiency. The thermal loads of commercial and institutional buildings are generally cooling-dominated. In this study have been developed ice storage type heat pump system for cooling and heating by heat pipe. This system was practiced performance test on evaluation criteria for heat storage systems. Accomplished the actual proof examination and looked into the performance of the system. In this study, measurement and analysis of ice storage type heat pump system for cooling and heating by heat pipe. The heat pump unit COP appears 3.05 for cooling and 4.20 for heating. As a result, the method to energy saving and to using a substitute energy actively that is heat pump cooling & heating system is expected by heat pipe. Thermal storage capacity appears $19.5RTH/m^3$ for cooling.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.4
• /
• pp.23-29
• /
• 2016

The purpose of this study is to study the laws of storage and utilization in various perspectives in order to maximize the storage of knowledge and to use stored knowledge. In other words, it analyzes the relationship rules in five viewpoints of 'human and knowledge', 'human and goods', 'the law of exact intersection with humans', 'human architecture formation process', 'human and knowledge' This course studies how to maximize the relationship rules between knowledge storage and utilization through knowledge management, intuition, rapid decision-making, and understanding of various knowledge. In order to maximize the value of knowledge in the organization, the knowledge management system obtained in this way systematically organizes various information about the knowledge creation of the members and distributes it to all employees to use it for their work. As an information management infrastructure, To effectively manage the various knowledge and know-how accumulated in the organization and to share them with each other.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.296-301
• /
• 2009

The ice storage system uses water for low temperature latent heat storage. However, a refrigerator capacity is increased and COP is decreased due to supercooling of water in the course of phase change from solid to liquid. This study investigates the cooling characteristics of the TMA-water clathrate compound including TMA (Tri-methyl-amine, $(CH_3)_3N)$ of $20{\sim}25wt%$ as a low temperature latent heat storage material. The results showed that the phase change temperature and the specific heat is increased and the supercooling degree is decreased as the weight concentration of TMA increased. Especially, the clathrate compound containing TMA 25wt% has the average phase change temperature of $5.8^{\circ}C$, the supercooling degree of $8.0^{\circ}C$ and the specific heat of 3.499 kJ/kgK in the cooling process. This can lead to reduction of operation time of refrigerator in low temperature latent heat storage system and efficiency improvement of refrigerator COP and overall system. Therefore, energy saving and improvement of utilization efficiency are expected.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.717-725
• /
• 2011

In the power system with an electric storage system that can increase utilization rate of the source of such new renewable energy, this paper introduces the approach on the daily unit commitment scheduling that determines simultaneously optimum operational condition and output of thermal generators and electric storage device. The unit commitment is one of the most important issues in economic operation and security of short-term operational plan of the power system. It is to determine on/off status of generator to minimize operational cost during the given period. The committed generator should satisfy various operational limitation such as estimated demand by system, spinning reserve condition within minimum operational cost. In order to determine on/off or charge/discharge/idle condition and output level of units and electric storage system, the MILP(Mixed Integer Linear Programming) is suggested. The proposed approach is the mixed method between LP(Linear Programming) and IP(integer programming) which seeks the value of real number and integer that maximize or minimize function objective within given condition. The daily unit commitment problem with the electric storage system is applied to MILP algorithm through linearization and formulation process. The proposed approach is applied to the test system.