• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.215-223
• /
• 2022

Objective: This study was to resolve the limitations of the experimental environment and to solve the shortcomings of the method of measuring human gait characteristics using optical measuring instruments. Design: A cross-sectional study. Methods: Fifteen healthy adults without a history of orthopedic surgery on the lower extremities for the past 6 months were participated. They were analyzed gait variables using the smart guide and the 3D image analysis at the same time, and their results were compared. Visual-3D was used to calculate the analysis variables. Results: The reliability and validity of the data according to the two measuring instruments were found to be very high; gait speed(0.85), cycle time(0.99), stride time of both feet(0.98, 0.97) stride legnth of both feet(0.86, 0.88) stride per minute of both feet(0.99, 0.96), foot speed of both feet(0.90, 0.91), step time of both feet(0.77, 0.71), step per minute(0.72, 0.74), stance time of both feet(0.96, 0.97), swing time of both feet(0.93, 0.79), double step time(0.81), initial double step time(0.84) and terminal step time(0.76). Conclusions: In the case of the smart insole, which measures human gait variables using the pressure sensor and inertial sensor inserted in the insole, the reliability and validity of the measured data were found to be very high. It can be used as a device to replace 3D image analysis when measuring pathological gait.

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.383-389
• /
• 2016

Objective: In this paper, work time for the representative fruit crops are collected and analyzed using time-diary method, and the collected data were compared with the directly observed work time using GPS device. Background: There is no consistent conclusion which measurement method for work time is accurate. Most of the research results were collected from the environment other than rural area. Therefore, there is need to review reliability of the measurement methods for the agricultural work which are carried out for a long duration. Method: Top five crops (apple, pear, grape, sweet persimmon, and peach) were selected according to the number of farms and cultivation areas. We let fruit growers fill a work diary during one cropping period. A difference between the work-time that was recorded by the farmers and the direct observed worktime using GPS device were analyzed. Results: Average direct work time for the five fruit crops found to be 7.1% of the total work time. Conclusions and Applications: Reliability was secured by recording the daily work diary at each work stage while aware that direct observation is carried on. Data which are being collected by government institutions are obtained by the memories of the respondents. Therefore, it is needed to try the method adopted by this study in order to collect more accurate data.

• 한국항행학회논문지
• /
• 제23권5호
• /
• pp.380-385
• /
• 2019

본 연구는 실제 공항에서 수집되는 여객 데이터를 활용하여 공항 내 여객의 체류 시간을 분석한 연구이다. 여객의 체류 시간은 공항 터미널 설계, 공항의 수익성에 영향을 주어 중요한 여객 특성으로 간주되어 왔지만 실제 여객 데이터 수집의 어려움으로 그에 대한 분석이나 실시간 공항 운영에 활용하기가 어려웠다. 하지만 스마트 공항의 일환으로 세계 유수의 공항에서 방대한 양의 여객 데이터를 수집하고 있고, 축적된 데이터를 활용하여 공항 내 여객 체류 시간 분석이 가능해졌다. 본 연구에서는 인천 국제 공항에서 수집된 여객 데이터를 활용하여 여객 체류 시간 분석을 수행하였으며, 방대한 양의 자료를 효율적으로 처리하기 위해 데이터 마이닝 기법인 클러스터링을 활용하여 여객을 체류 시간에 따라 구분하였다. 분석 결과 인천 국제 공항 출발 여객은 체류 시간에 따라 1) 체류 시간이 짧고 대부분의 시간을 에어사이드에서 보내는 여객, 2) 평균 3 시간 정도의 체류 시간을 갖는 여객, 3) 총 체류 시간이 압도적으로 긴 여객 등 크게 3 개의 클러스터로 구분할 수 있는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제3권2호
• /
• pp.97-115
• /
• 2012

The energy-transmitting boundary, which is used in the well-known finite element method (FEM) program FLUSH, is quite efficient for the earthquake response analysis of buildings considering soil-structure interaction. However, it is applicable only in the frequency domain. The author proposed methods for transforming frequency dependent impedance into the time domain, and studied the time domain transform of the boundary. In this paper, first, the estimation methods for both the halfspace condition under the bottom of the soil model and the pseudo three-dimensional effect were studied with the time domain transmitting boundary. Next, response behavior when using the boundary was studied in detail using a practical soil and building model. The response accuracy was compared with those using viscous boundary, and the boundary that considers the excavation force. Through these studies, the accuracy and efficiency of the proposed time domain transmitting boundary were confirmed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.195-198
• /
• 1997

This paper proposes the effective compensation method of the rotor time constant of induction motor. An indirect vector control method is highly dependent on the motor parameters. To solve the problem of performance degradation due to parameter variation in an indirect vector control of induction motor, we compensate the rotor time constant by current error feedback. The proposed method is a simple on-line rotor time constant compensation method using the information from terminal voltages and currents. As the current error, difference between current command and estimated current, approaches to zero, the value of rotor time constant in an indirect vector controller follows the real value of induction motor. This scheme is valid transient region as well as steady state region regardless of low or high speed. This method is verified by computer simulation. For this, we constructed the simulation model of induction motor, indirect vector controller and current regulated PWM (CRPWM) voltage source inverter (VSI) using SIMULINK in MATLAB.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2004년도 학술발표논문집
• /
• pp.237-241
• /
• 2004

In standard time-to-event or survival analysis, the occurrence times of the event of interest are observed exactly or are right-censored. However in certain situations such as the AIDS data, the incubation period which is the time between HIV infection time and the diagnosis of AIDS is usually doubly censored. That is the HIV infection time Is interval censored and also the time of the diagnosis of AIDS is right censored. In this paper, we Impute the Interval censored infection time using the conditional mean imputation and estimate the coefficient factor of the regression analysis for the incubation period using Gibbs sampler. We applied parametric and semi-parametric methods for the analysis of the Incubation period and compared the results.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.153-162
• /
• 2010

The finite buffer GI/G/1/K system is set up by using an unconventional arrangement of the state space, in which the remaining interarrival time or service time is chosen as the level. The stationary distributions of resulting Markov chain can be explicitly determined, and the chain is positive recurrent without any restriction. This is an advantage of this method, compared with that using the elapsed time approach [2].

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.5-7
• /
• 2012

This study presents relations between the time lag and interaction index of the impinging-jet injectors using time lag model in a model chamber. To analyze the response of the flame, 5% amplitude of oxidizer velocity is artificially perturbed at a resonance frequency. At the mixing point of fuel and oxidizer, which determines the characteristic length, the relationship between velocity perturbation and heat release rate is quantified by combustion parameters of interaction index and time lag. As the improved method to apply the time-lag, the method using the average velocity obtained from numerical results is suggested.

• 한국통신학회논문지
• /
• 제30권9A호
• /
• pp.822-829
• /
• 2005

본 논문에서는 LBT-Random Searching 방식을 채용한 RFID 시스템의 트래픽 처리시간 및 주파수 채널 용량 분석을 위한 알고리즘을 제시하였다. 서비스 시간, 주파수 채널 탐색시간, 연속적인 주파수 채널 사용에 따른 지연시간, 연속적인 동일 주파수 채널 사용에 따른 지연시간을 고려하여 정상상태에서의 트래픽 처리 지연시간을 산출하였다. 시뮬레이션을 통하여 최대처리 가능한 트래픽 용량 및 주파수 채널수를 평가하고, 제안된 분석 알고리즘 정확성을 입증하였다.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.34-38
• /
• 2018

An X-band microwave photonic (MWP) filter using switch-based fiber-optic delay lines has been proposed and experimentally demonstrated. It is composed of two electro-optic modulators (EOMs) and $2{\times}2$ optical MEMS-switch-based fiber-optic delay lines. By changing time-delay difference and coefficients of each wavelength signal by using fiber-optic delay lines and an electro-optic modulator, respectively, a bandpass filter or a notch filter can be implemented. For an X-band MWP filter with four channel elements, fiber-optic delay lines with the unit time-delay of 50 ps have been experimentally realized and the frequency responses corresponding to the time-delays has been measured. The measured frequency response error at center frequency and the time-delay difference error were 180 MHz at 10 GHz and 3.2 ps, respectively, when the fiber-optic delay line has the time-delay difference of 50 ps.