• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1055-1062
• /
• 2002

Recently, the lesson plan document that is imported in the educational area is not provided to the educational information systematically, and the teachers are not easy to compose the lessen plan documentation. So, it needs additional time and effort to develope the lesson plan documents. Because of increasing the distributing network. web-based lesson plan system is required to all of the education area. Therefore, we need to compose the lesson plan that is possible to obtain the various teacher's requirement by providing creation, retrival, and reusability of document using the standard XML on web. In this paper, we developed the system for creating the common DTD (Document Type Definition), providing the standard XML document through the common DTD over the lesson plan analysis. In this system, it provides the editor to compose the lesson plan and supports the searching function to improvement of reusability on the existing lesson plan. We design the searching functions such as the structure base, facet and keyword. The composed lesson plans are interoperated with Database. Consequently, we can share the information on web by composing the lesson plan using the XML and save the time and cost by directly writing the lesson plan on web. We can also provide the improved learning environment.

• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.1-16
• /
• 2002

Purpose : Three dimensional conformal radiotherapy planning is being used widely for the treatment of patients with brain tumor. However, it takes much time to develop an optimal treatment plan, therefore, it is difficult to apply this technique to all patients. To increase the efficiency of this technique, we need to develop standard radiotherapy plant for each site of the brain. Therefore we developed several 3 dimensional conformal radiotherapy plans (3D plans) for tumors at each site of brain, compared them with each other, and with 2 dimensional radiotherapy plans. Finally model plans for each site of the brain were decide. Materials and Methods : Imaginary tumors, with sizes commonly observed in the clinic, were designed for each site of the brain and drawn on CT images. The planning target volumes (PTVs) were as follows; temporal $tumor-5.7\times8.2\times7.6\;cm$, suprasellar $tumor-3\times4\times4.1\;cm$, thalamic $tumor-3.1\times5.9\times3.7\;cm$, frontoparietal $tumor-5.5\times7\times5.5\;cm$, and occipitoparietal $tumor-5\times5.5\times5\;cm$. Plans using paralled opposed 2 portals and/or 3 portals including fronto-vertex and 2 lateral fields were developed manually as the conventional 2D plans, and 3D noncoplanar conformal plans were developed using beam's eye view and the automatic block drawing tool. Total tumor dose was 54 Gy for a suprasellar tumor, 59.4 Gy and 72 Gy for the other tumors. All dose plans (including 2D plans) were calculated using 3D plan software. Developed plans were compared with each other using dose-volume histograms (DVH), normal tissue complication probabilities (NTCP) and variable dose statistic values (minimum, maximum and mean dose, D5, V83, V85 and V95). Finally a best radiotherapy plan for each site of brain was selected. Results : 1) Temporal tumor; NTCPs and DVHs of the normal tissue of all 3D plans were superior to 2D plans and this trend was more definite when total dose was escalated to 72 Gy (NTCPs of normal brain 2D $plans:27\%,\;8\%\rightarrow\;3D\;plans:1\%,\;1\%$). Various dose statistic values did not show any consistent trend. A 3D plan using 3 noncoplanar portals was selected as a model radiotherapy plan. 2) Suprasellar tumor; NTCPs of all 3D plans and 2D plans did not show significant difference because the total dose of this tumor was only 54 Gy. DVHs of normal brain and brainstem were significantly different for different plans. D5, V85, V95 and mean values showed some consistent trend that was compatible with DVH. All 3D plans were superior to 2D plans even when 3 portals (fronto-vertex and 2 lateral fields) were used for 2D plans. A 3D plan using 7 portals was worse than plans using fewer portals. A 3D plan using 5 noncoplanar portals was selected as a model plan. 3) Thalamic tumor; NTCPs of all 3D plans were lower than the 2D plans when the total dose was elevated to 72 Gy. DVHs of normal tissues showed similar results. V83, V85, V95 showed some consistent differences between plans but not between 3D plans. 3D plans using 5 noncoplanar portals were selected as a model plan. 4) Parietal (fronto- and occipito-) tumors; all NTCPs of the normal brain in 3D plans were lower than in 2D plans. DVH also showed the same results. V83, V85, V95 showed consistent trends with NTCP and DVH. 3D plans using 5 portals for frontoparietal tumor and 6 portals for occipitoparietal tumor were selected as model plans. Conclusion : NTCP and DVH showed reasonable differences between plans and were through to be useful for comparing plans. All 3D plans were superior to 2D plans. Best 3D plans were selected for tumors in each site of brain using NTCP, DVH and finally by the planner's decision.

• Progress in Medical Physics
• /
• v.28 no.1
• /
• pp.33-38
• /
• 2017

Creating individualized build-up material for superficial photon beam radiation therapy at irregular surface is complex with rice or commonly used flat shape bolus. In this study, we implemented a workflow using 3D printed patient specific bolus and describe our clinical experience. To provide better fitted build-up to irregular surface, the 3D printing technique was used. The PolyLactic Acid (PLA) which processed with nontoxic plant component was used for 3D printer filament material for clinical usage. The 3D printed bolus was designed using virtual bolus structure delineated on patient CT images. Dose distributions were generated from treatment plan for bolus assigned uniform relative electron density and bolus using relative electron density from CT image and compared to evaluate the inhomogeneity effect of bolus material. Pretreatment QA is performed to verify the relative electron density applied to bolus structure by gamma analysis. As an in-vivo dosimetry, Optically Stimulated Luminescent Dosimeters (OSLD) are used to measure the skin dose. The plan comparison result shows that discrepancies between the virtual bolus plan and printed bolus plan are negligible. (0.3% maximum dose difference and 0.2% mean dose difference). The dose distribution is evaluated with gamma method (2%, 2 mm) at the center of GTV and the passing rate was 99.6%. The OSLD measurement shows 0.3% to 2.1% higher than expected dose at patient treatment lesion. In this study, we treated Mycosis fungoides patient with patient specific bolus using 3D printing technique. The accuracy of treatment plan was verified by pretreatment QA and in-vivo dosimetry. The QA results and 4 month follow up result shows the radiation treatment using 3D printing bolus is feasible to treat irregular patient skin.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.151-159
• /
• 2016

Tower crane (T/C) is one of the major equipment that is highly demanded in construction projects. Especially, most high-rise building projects require T/C to perform lifting and hoisting activities of materials. Therefore, lifting plan of T/C needs to reduce construction duration and cost. However, most lifting plan of the T/C in construction sites has still performed depending on experience and intuition of the site manager without systematic process of rational work. Dependency structure matrix (DSM) is useful tool in planning the activity sequences and managing information exchanges unlike other existing tools. To improve lifting plan of T/C efficiently, this study presents a framework for the scheduling T/C using DSM through the case study in real world construction site. The results of case study showed that the scheduling T/C using DSM is useful to optimize the T/C lifting plan in terms of easiness, specially in the typical floor cycle lifting planning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.243-249
• /
• 2006

Statement of problem: It is important to have a correct presurgical treatment plan before any implant surgery. It must contain substantial information about the patient concerned. However, the standard classification only notifies the dentist about various structural, pathological and physiological dimensions Due to diverse structure of the jaw bone, current standard classification does not tell spatial dimensions of the available bone for implant insertion sites. Purpose of study: The purpose of this study is to report the establishment of the systematic implant treatment plan and its clinical treatment using $Implan^(R)$ program which is based on ASCIi-classification that is available for future diagnosis and scale of treatment and for systematic implant insertion. Results: By assisting the systemic measurement of the available alveolus dimension during implant surgery, it was easy to set initial implant treatment plan. Conclusion: Using $Implan^(R)$ program which is based on ASCIi-classification system that allows the establishment of systemic implant treatment plan and successful clinical performance, it was possible to establish the founding or initial implant treatment plan , the acquisition of information, and the systematization of documentation.

• Journal of Urban Science
• /
• v.7 no.2
• /
• pp.37-46
• /
• 2018

The purpose of this study is to review and evaluate the proper planning for 2030 Incheon Urban Parks & Green Space Master Plan. Some of the plans are aimed at multiple small districts within the city's old town, as local governments are planned to be sub-subsidized by Incheon Metropolitan City. However, these plans have become simple plans for each district and therefore find it difficult to collect from the perspective of the using system of the residents who are directly used. First, the construction of the urban park and green space network requires the construction of a service using system that can be felt by the users. Second, the basic idea of each district planned as the detailed strategy of the master plan should be planned through consultation with nearby the district. Third, specific targets and directions for the urban park and green space plan through the urban development project are needed.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.8-15
• /
• 2022

In this paper, we proposed the method of virtual reality-based surgical navigation to reproduce the pre-planned position and angle of the pedicle screw in spinal fusion surgery. The goal of the proposed method is to quantitatively save the surgical plan by applying a virtual guide coordinate system and reproduce it in the surgical process through virtual reality. In the surgical planning step, the insertion position and angle of the pedicle screw are planned and stored based on the virtual guide coordinate system. To implement the virtual reality-based surgical navigation, a vision tracking system is applied to set the patient coordinate system and paired point-based patient-to-image registration is performed. In the surgical navigation step, the surgical plan is reproduced by quantitatively visualizing the pre-planned insertion position and angle of the pedicle screw using a virtual guide coordinate system. We conducted phantom experiment to verify the error between the surgical plan and the surgical navigation, the experimental result showed that target registration error was average 1.47 ± 0.64 mm when using the proposed method. We believe that our method can be used to accurately reproduce a pre-established surgical plan in spinal fusion surgery.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.187-192
• /
• 2011

The purpose of this study is to evaluate the supply plan of public rental housing under the Lee Myung-bak government. According to the supply plan, the government will supply public rental housings by 80,000 unit every year from 2009 to 2018, and achieve 12% as stock ratio in 2018. To evaluate the supply plan, this study analyzed housing needs of tenants in private rental housing by using the raw data of Korea Welfare Panel Survey(2008). The results are as follows: (1) It is difficult for the supply plan to meet the housing needs of tenants in private rental housing. (2) The link between supply plan and stock ratio target is weak. (3) To meet the housing needs, it is necessary to supply public rental housings by 107,000 unit every year for 10 years, and, in this case, the stock ratio will be 10% in 2018. In conclusion, this study proposed that the supply plan of public rental housing should be redesigned.

• Korean Institute of Interior Design Journal
• /
• v.22 no.4
• /
• pp.141-148
• /
• 2013

This study aims to investigate the eco-friendly planning methods for a sustainable apartment houses in the Metropolitan area of Seoul. Eco-friendly plans that considers the environmental issues were attempted from the beginning of 2000s, and since then, many apartment houses in Korea were built using this concept. They were, however, generally focusing on the physical and spatial aspects of the site plan. After the Seoul C40 weather summit conference in 2009, the low carbon green housing standard has been emphasized and thus the chemical concept was added to the existing physical planning methods. Under such a background, this study intends to investigate the eco-friendly plans for the apartment houses in the 2000s. This includes an ecological network plan, an ecological base plan, a building greening plan, a water treatment plan, and an energy saving plan. Based on the analysis and synthesis of these planning methods in the early 21st century, it would be possible to set up a proper future plan to enhance the sustainable built environment in the housing industry in the coming years.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.74-96
• /
• 2002

The objectives of this study is to suggest the rectifying sampling inspection plan considering quality cost. Limiting quality level(LQL) plans(also called LTPD plans) and outgoing quality(OQ) plans are considered. The Hald's linear cost model is discussed with and without a beta prior for the distribution of the fraction of nonconforming items in a lot. It is assumed that the sampling inspection is error free. We consider the design of reliability acceptance sampling plan (RASP) for failure rate level qualification at selected confidence level. The lifetime distribution of products is assumed to be exponential. MIL-STD-690C and K C 6032 standards provide this procedures. But these procedures have some questions to apply in the field. The cost of test and confidence level(1-$\beta$ risk) are the problem between supplier and user. So, we suggest that the optimal life test sampling inspection plans using simple linear cost model considering product cost, capability of environment chamber, environmental test cost, and etc. Especially, we consider a reliability of lots that contain some nonconforming items. In this case we assumed that a nonconforming item fail after environmental life test. Finally, we develope the algorithm of the optimal sampling inspection plan based on minimum costs for rectifying inspection and RASP. And computer application programs are developed So, it is shown how the desired sampling plan can be easily found.