• 한국컴퓨터정보학회논문지
• /
• 제21권11호
• /
• pp.17-21
• /
• 2016

Heterogeneity assessment of tumor in oncology is important for diagnosis of cancer and therapy. The aim of this study was performed assess heterogeneity tumor region in PET image using texture analysis. For assessment of heterogeneity tumor in PET image, we inserted sphere phantom in torso phantom. Cu-64 labeled radioisotope was administrated by 156.84 MBq in torso phantom. PET/CT image was acquired by PET/CT scanner (Discovery 710, GE Healthcare, Milwaukee, WI). The texture analysis of PET images was calculated using occurrence probability of gray level co-occurrence matrix. Energy and entropy is one of results of texture analysis. We performed the texture analysis in tumor, liver, and background. Assessment textural features of region-of-interest (ROI) in torso phantom used in-house software. We calculated the textural features of torso phantom in PET image using texture analysis. Calculated entropy in tumor, liver, and background were 5.322, 7.639, and 7.818. The further study will perform assessment of heterogeneity using clinical tumor PET image.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.260-267
• /
• 2016

Considering the effect of dynamic response amplification, a reliability analysis of an offshore wind turbine support structure under an earthquake is presented. A reliability analysis based on the dynamic response requires a large amount of time when using not only a level 3 approach but also level 2 such as a first order reliability method (FORM). Moreover, if a limit state is defined by using the maximum stress at a structural joint where stress concentration occurs, a three-dimensional element should be used in the finite element analysis. This makes the computational load much heavier. To deal with this kind of problem, two techniques are suggested in this paper. One is the application of a quasi-static structural analysis that takes the dynamic amplification effect into account. The other is the use of a stress concentration factor to estimate the maximum local stress. The proposed reliability analysis is performed using a level 2 FORM and verified using a level 3 simulation approach.

• 복식문화연구
• /
• 제27권3호
• /
• pp.274-284
• /
• 2019

Research on cosmetic behavior has developed significantly since the 2000s. Reviewing cosmetic behavior research can be meaningful because it can grasp trends in the domestic cosmetics market, and it can also illuminate how domestic consumers' interest in makeup has changed over time. The purpose of this study is to investigate the links between major keywords and the keywords which affect makeup behavior of different age groups through network analysis. In this study we analyzed thesis and journal data based on makeup behavior through network analysis using Nodexl. We analyzed 10 years of journals and theses - from 2000 to 2017, and investigated age-related differences in variables related to makeup behavior. Research subjects were divided into age-based groups: 10, 20-40, and over 50. The total number of theses collected was 82. In order to perform network analysis using the Nodexl program, we extracted the frequency of representative words using the KrKwic program. The extracted core words were analyzed for degree centrality, betweenness centrality and eigenvector centrality using Nodexl. The expected result is that the network analysis using keywords will lead to different variables depending on age and the main goal of the cosmetics market, and it is expected to be used as the basis for follow-up research related to cosmetic behavior.

• 한국멀티미디어학회논문지
• /
• 제13권11호
• /
• pp.1586-1593
• /
• 2010

확률적 패턴 매칭과 동적 패턴 매칭의 어휘 인식 오류 보정 방법에서는 핵심어를 기반으로 문장을 의미론적으로 분석하므로 형태론적 변형에 따른 핵심어 분석이 어려운 문제점을 가지고 있다. 이를 해결하기 위해 본 연구에서는 음절 복원 알고리즘에서 형태소 분석을 이용하여 인식된 음소 열을 의미 분석 과정을 통해 음소의 의미를 파악하고 형태론적 분석으로 문장을 복원하여 어휘 오인식률을 감소하였다. 시스템 분석을 위해 음소 유사률과 신뢰도를 이용하여 오류 보정률을 구하였으며, 어휘 인식 과정에서 오류로 판명된 어휘에 대하여 오류 보정을 수행하였다. 에러 패턴 학습을 이용한 방법과 오류 패턴 매칭 기반 방법, 어휘 의미 패턴 기반 방법의 성능 평가 결과 2.0%의 인식 향상률을 보였다.

• 소음진동
• /
• 제9권5호
• /
• pp.975-983
• /
• 1999

This paper describes the dynamic characteristics of the joint structures in case of using the simplified beam model in the F. E. analysis. The modeling errors, when replace the shell with the beam, are investigated through F. E. normal modes analysis. Normal mode analysis were performed to obtain the natural frequencies of the L and T shaped joints with various type of channels. The results were analyzed to access the effects of the models on the accuracy of F.E. analysis by identifying the geometric factors which cause the error. The geometric factors considered are joint angle, channel length, thickness and area ratio of the hollow section to the filled one. The joint stiffness evaluation technique is developed in this study using normal modes analysis with Lumped Mass. With this method, the progressively improved results of F. E. analysis are obtained using the simplified beam model. The static and normal modes analysis are performed with the joint stiffness values obtained by the Kazunori Shimonkakis' virtual stiffness method and the proposed method and these simplified modeling errors are compared.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.117-124
• /
• 2002

The major purpose of this study is to determine the dynamic behavior of soil-pile-structure interaction system considering the underground cavity. For the analysis, a numerical method fur ground response analysis using FE-BE coupling method is developed. The total system is divided into two parts so called far field and near field. The far field is modeled by boundary element formulation using the multi-layered dynamic fundamental solution that satisfied radiational condition of wave. And this is coupled with near field modeled by finite elements. For the verification of dynamic analysis in the frequency domain, both forced vibration analysis and free-field response analysis are performed. The behavior of soil non-linearity is considered using the equivalent linear approximation method. As a result, it is shown that the developed method can be an efficient numerical method to solve the seismic response analysis considering the underground cavity in 2D problem.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.648-651
• /
• 2004

Biped robot has better mobility than other mobile robot, but it is hard to maintain balance during walking. In order to maintain balance, stability analysis is a key point for a biped robot. The zero moment point analysis has been used most in stability analysis. In this paper, we propose different method of stability analysis using wrench system. It is possible to generate a wrench system by applying a force along an axis in space and simultaneously applying a moment about the same axis. Wrench system is equivalent to a force and moment applied along the same axis. We compare the result of wrench system analysis with that of zero moment analysis in biped robot stability using simulation program.

• 대한음성학회지:말소리
• /
• 제44호
• /
• pp.93-104
• /
• 2002

There are many speech analysis tools available. Among them real-time analysis tool is very useful for interactive experiments. A real-time speech analysis tool was implemented using Matlab. Matlab is a very widely used general purpose signal processing tool. In general, its computational speed is relatively lower than that of the codes from conventional programming languages. Especially, real-time analysis including input of signal and output of the result was not possible in the past. However, due to the improvement of computing power of PCs and inclusion of real-time I/O toolboxes in Matlab, real-time analysis is now possible in some extent by Matlab only. In this experiment, we tried to implement a real-time speech analysis tool using Matlab. Pitch and spectral information is computed in real-time. From the result it is shown that such real-time applications can be implemented easily using Matlab.

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.39-46
• /
• 2012

The objectives of this study is intended to analyze stresses using the boundary element method and probability analysis for agricultural structure. Loads and material properties are an important factor when analyzing the structure. Until now, designing structure, loads and material properties are applied deterministic value. However, load and material properties involve uncertainties due to those change probabilistic and deterministic methods could not consider uncertainties. To solve these problems, the reliability analysis based on probability properties scheme was developed. Reliability analysis is easy to approach to analysis frame structure, however it has limitation when solving plane stress strain problems a kind of agricultural structures. The BEM (Boundary Element Method) is able to analysis plane strain problems by boundary conditions. Thus, this study applied boundary element method to analysis plane strain problem, load and material properties as a probabilistic value to calculate the analytical model using Monte Carlo simulations were developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.621-622
• /
• 2006

In this paper, we performed the customization of CAE analysis in the process of product development and verification. The purpose of customized analysis is to implement collaboration framework of inter-corporate, inter-division for knowledge process based on product development. Customized analysis methodology using ANSYS Workbench API is presented for the web-based and workbench-based application. Cellular phone was selected as a CAD model, and template based process of analysis is conducted. By using this system, customized analysis is suitable to site or user oriented specific analysis and for user who has little experience on CAE analysis.