• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.678-688
• /
• 2021

This study was conducted to provide growth characteristics and stand information in preparation for natural regeneration method and silvicultural treatment of seed tree method in Korean red pine stands by using the field inventoried data 18 years after the seed tree regeneration method in 2001 and analyzing the stand and sapling characteristics. The study area was located in the Research Forest of Kangwon National University, Chuncheon-si, Gangwon-do. In November 2018, we collected tree measurement factors, such as diameter at breast height (DBH), height, crown class, stem quality, tree age, and annual height increment on the established plots. We calculated the basal area, volume, height-diameter ratio (HD ratio), and additional stand density variables such as the relative density and %stocking to analyze the managed stands. The number of mother trees was 58 trees/ha, with a 17.7% stocking level, whereas the number of saplings was 2,330 trees/ha, with a 79.0% stocking level. In germination, the age distribution of saplings ranged from 2001 to 2007, with most belonging to 15-16 years. The development condition of saplings was 10 cm in DBH and 8 m in height. DBH and height were higher as the crown class is more dominant, and this difference was statistically significant in the analysis of variance and Duncan's multiple comparison test (p<0.0001). HD ratio ranged mostly between 80% and 90%, and more than 95% of sapling stems were of high quality, with a straight, unbroken top, non-sweep, and non-diseased stem. On average, the annual height increment of saplings was 21.9 cm at 1 year, 43.3 cm at 5 years, 54.3 cm at 10 years, and 64.3 cm at 15 years. The overall height growth with age increased smoothly. According to the analysis of covariance, the annual height growth by crown class differed significantly. The regression analysis parameters revealed that annual height growth increased with age and dominant crown class.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.781-788
• /
• 2021

Due to the high sensitivity to radiation, excessive exposure needs to be prevented by accurately measuring the dose irradiated to the skin during radiation therapy. Although clinical trials use dosimeters such as film, OSLD, TLD, glass dosimeter, etc. to measure skin dose, these dosimeters have difficulty in accurate dosimetry on skin curves. In this study, to solve these problems, we developed a skin dosimeter that can be attached according to human flexion and evaluated its response characteristics. For the manufacture of the dosimeter, lead oxide (PbO) with high atomic number (Z_Pb: 82, Z_O: 8) and density (9.53 g/cm³) and silicon binders that can bend according to human flexion were used. In the case of a dosimeter made of PbO material, the performance degradation has been prevented by using parylene and others due to the presence of degradation due to oxidation, but the previously used parylene is affected by bending, so a new form of passive layer was produced and applied to the skin dosimeter. The characteristic evaluation of the skin dosimeter was evaluated by analyzing SEM, reproducibility, and linearity. Through SEM analysis, bending was evaluated, reproducibility and linearity at 6 MeV energy were evaluated, and applicability was assessed with a skin dosimeter. As a result of observing the dosimeter surface through SEM analysis, the parylene passive layer PbO dosimeter with the positive layer raised to the parylene produced cracks on the surface when bent. On the other hand, no crack was observed in the silicon passive layer PbO dosimeter, which was raised to silicon passive layer. In the reproducibility measurement results, the RSD of the silicon passive layer PbO dosimeter was 1.47% which satisfied the evaluation criteria RSD 1.5% and the linearity evaluation results showed the R² value of 0.9990, which satisfied the evaluation criteria R² 9990. The silicon passive layer PbO dosimeter was evaluated to be applicable to skin dosimeters by demonstrating high signal stability, precision, and accuracy in reproducibility and linearity, without cracking due to bending.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.167-178
• /
• 2021

The purpose of this study is to analyze the direct investment decision factors in the Kaesong Industrial Complex and Vietnam, and to contribute to the creation of domestic jobs and the revitalization of the inter-Korean economy. According to the analysis, most of the Kaesong Industrial Complex and Vietnamese investment companies are entering the complex for the purpose of utilizing cheap labor, cheap factory locations, sales/development of local markets, and bypass export production bases in third countries. This can be divided into production-efficient investors using differences in production price such as labor costs and market-oriented investors to sell and expand the local market, which seems to be consistent with global direct investment patterns such as Nike, Apple, and Amazon. However, even if the North Korea-U.S. denuclearization talks ease or lift sanctions, Vietnamese investors' willingness to invest in the North Korea has been most burdened by the possibility of closing special economic zones due to political risks. Last but not least, it is important to note that those willing to invest in North Korea are mostly smaller enterprises in textiles, sewing, footwear and leather industries-those that benefit from low-cost labor. Since their size is small, they need policy support in financing, especially in the early stages of their business. Even after they grow past the early stages, those without collateral would still need state guarantee letters to get financing. Thus, it is worth considering to use the Inter-Korean Cooperation Fund to compensate commercial banks for bad loan loss or for low-interest loans for smaller SMEs. The interviews with SMEs found that red-tape is one of the biggest difficulties they face. Thus, it is recommended that a one-stop service agency should be established to cover all processes and issues related to inter-Korean economic cooperation to eliminate redundancy and expediate government support for SMEs.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.85-99
• /
• 2021

Due to the continuous unemployment problem, the number of jobs is gradually decreasing, and entrepreneurship is emerging as an alternative. This is because, despite the government operating various start-up support programs to build a start-up-friendly culture, young entrepreneurs cannot endure the valley of death and disappear. Therefore, through this study, we intend to provide implications by analyzing the impact on Entrepreneurial satisfaction, which is essential for continuously running a business, and life satisfaction, which can act as a social awareness. This study was conducted with 573 non-wage workers who belonged to the founders among the participants of the 'College Graduation Occupational Migration Path Survey(GOMS)' survey provided by the Korea Employment Information Service. In order to analyze the relationship between entrepreneurial competency and job fit, Entrepreneurial satisfaction, and life satisfaction, the analysis was conducted using the SPSS 23.0 program. The main research results are summarized as follows. First, entrepreneurial competency has a positive effect on Entrepreneurial satisfaction and life satisfaction. Second, job fit indicates a moderating role in the relationship between entrepreneurial competency and Entrepreneurial satisfaction. Third, start-up satisfaction appears to have a partial mediating role in the relationship between entrepreneurial competency and life satisfaction. Fourth, as a result of analyzing the difference between groups according to the type of start-up(single/partnership), the group that worked together showed higher Entrepreneurial satisfaction and life satisfaction. The main implications of this study are: First, in order to increase the Entrepreneurial satisfaction and life satisfaction of university graduates who are the subject of the study, it will be necessary to design a program that can diagnose and enhance the entrepreneurial competency of students at the university level. Second, entrepreneurial competency is a basic intrinsic factor that founders must have, and it should act as an important evaluation factor when selecting founders for support programs from start-up support organizations as well as founders. Third, it is necessary to maintain mutual trust by documenting problems (positions, wages, management rights, distribution of profits, etc.) that may occur in joint ventures with objective data. Fourth, it is necessary to establish an environment in which the MZ generation, armed with the challenging spirit and creativity, can continue to take on challenges even if they fail.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.256-264
• /
• 2021

Rapeseed (Brassica napus L.) is generally sown in late autumn and harvested in early summer in Korea, however, spring cultivation has also been attempted in some areas because frequent climate changes induce reducing productivity. Therefore, there is a need for a transplanting technology that is relatively easy to control of cropping season according to changes in cultivation conditions. In this study, to find out the optimal characteristics of seedlings for machine transplanting of spring cultivation, seedling morphological characteristics were investigated according to the seedling age of three varieties for 2020 and 2021. The hypocotyl length was less than 2 cm in both years and the 40-day-old seedling was the shortest among all seedling ages. The number and size of leaf were increased with longer seedling age in both years. To evaluate seedling quality, total seedling length, seedling weight, and impact resistance were measured before transplanting. Total seedling length was the longest in 40-day-old seedlings and the shortest in 25-day-old seedlings in both years. In the case of seedling weight, no significant differences were observed depending on the seedling age and the impact resistance increased with increasing seedling age. Finally, 'Jungmo7001', 'Naehan', and 'Tamla' showed a high transplanting rate in seedlings grown for more than 30 days, 35 days, and 40 days, respectively, in the field using a general transplanter. These results suggest that the proper seedling age for transplanting is limited depending on the rapeseed varieties. The suitable seedling cultivation method can be selected for different cultivation environments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.789-797
• /
• 2021

The worldwide sizes of container ships are rapidly increasing. The container ship size in 2005, which was about 9,200 TEU has increased to 24,000 TEU in recent times. In addition to the increase in the sizes of the container ships, the arrivals/departures of large container vessels to/from Korea have also increased. Hence, the necessity for reviewing safe passage of such vessels is emphasized. In the present study, a 24,000 TEU container vessel was used as a model ship to calculate the under-keel clearance (UKC) at Gadeok Channel through which vessels must pass to arrive at Busan New Port, in accordance with the Korean Port and Fishing Port Design Standards and Commentary. In addition, the maximum allowable speed that meets UKC standards was calculated using various squat formulas, whose results were then compared with the current speed limit standards. The analysis results show that Busan New Port requires 10% marginal water depth, and the squat that meets this requirement is 0.95 m. Gadeok Channel requires 15% marginal water depth, and the squat that meets this requirement is 1.78 m; in this case, the maximum allowable speed is calculated as 15 kts. Busan New Port has set the speed limit as 12 kts, which is higher than the calculated 11 kts. Thus, speed limit reconsideration is required in terms of safety. However, the set speed limit for Gadeok Channel is 12 kts, which is lower than the calculated 15 kts. Thus, additional considerations may be provided to increase the speed limits for smooth navigational passage of vessels. The present study, however, is constrained by the fact that it reflects only a limited number of elements in the UKC and allowable speed calculations; therefore, more accurate UKC and safe speed values can be suggested based on extended studies to this research.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.232-245
• /
• 2021

The present study is about a brand development strategy that utilizes Korean traditional patterns. The global culturenomics phenomenon confirms the value of the cultural aspects of design when a national brand is established. People succeed with their unique aesthetic sense and reinterpret it in a modern view, and this design acts as today's national brands. In this way, people used traditional patterns and original designs, along with regional characteristics and formative style, in developing their designs. However, due to recent changes in the global environment, modern people live in an "untact" world, and consumption culture shifted toward online marketing. In this environment, where one is isolated from social activities, there needs to be a strong image that can dramatically change the mood of one's home. I would like to re-examine the Dan-Chung pattern, whose painting depends on the aesthetic characteristics of architecture to protect the wooden members of the framework in traditional architecture. The pattern and color of Dan-Chung, coated in traditional architecture, differs by the type of construction used, which includes a palace, a Buddhist temple, and a Confucianism Dan Chung. The Geummoon pattern contains aesthetic factors to add solemnity to the Main Buddhist Halls, which contain Buddha. This is a new medium that continues the current traditions instead of remaining in the past. Among different Dan Chung patterns, Geummoon has magnificent decoration consisting of the highest grade materials and unique composition; therefore, it is suitable to be reinterpreted in modern terms. The same pattern can be interpreted in different ways with different colors, so there is a great aesthetic impression in the Geummoon pattern. The value of preservation for exploration and theoretical study of the traditional pattern is important, but recreating the pattern into modern formative art can present a new angle of view and national brand, bearing pride in our cultural assets. The study used multidimensional molding methods for realistic presentation after going through the two-dimensional design process. The significant value of Korean molding beauty which hangs onto the past will play a crucial role in establishing our national brand.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1849-1858
• /
• 2021

We analyzed the monthly and annual trends of the meteorological factors(wind speeds and directions and air temperatures) measured at an automated synoptic observation system (ASOS) and fine particle (PM₁₀ and PM_2.5) concentrations measured at the air quality monitoring systems(AQMSs) in Suwon. In addition, we investigated how the fine particle concentrations were related to the meteorological factors as well as urban morphological parameters (fractions of building volume and road area). We calculated the total volume of buildings and the total area of the roads in the area of 2 km × 2 km centered at each AQMS using the geographic information system and environmental geographic information system. The analysis of the meteorological factors showed that the dominant wind directions at the ASOS were westerly and northwesterly and that the average wind speed was strong in Spring. The measured fine particle concentrations were low in Summer and early Autumn (July to September) and high in Spring and Winter. In 2020, the annual mean fine particle concentration was lowest at most AQMSs. The fine particle concentrations were negatively and weakly correlated with the measured wind speeds and air temperatures (the correlation between PM_2.5 concentrations and air temperatures was relatively strong). In Suwon city, at least for 6 AQMSs except for the RAQMS 131116 and AQMS 131118, the PM₁₀ concentrations were affected mainly by the transport from outside rather than primary emission from mobile sources or wind speed decrease caused by buildings and, in the case of PM_2.5, vise versa.

• Journal of Plant Biotechnology
• /
• v.48 no.3
• /
• pp.179-185
• /
• 2021

Indoor gardening includes wall greening, terrariums, and flower arrangements. Among these types of indoor gardens, the terrarium is easy to access for the general public, but in Korea, because of the focus on esthetics, the original purpose of creating terrariums, which was to grow plants sustainably in an enclosed space, has been lost. In addition, miniaturization of plants is required to grow plants in an enclosed space. Since the available plant species suitable for a terrarium are limited, only plants such as succulents, cacti, and moss have been used. In this study, Bronze (X Graptosedum) was used, and these problems were solved using the following three methods: placement and growth of virus-free plants in the terrarium; extending the diversity of plants with minimal size that can be planted in terrariums; and reducing the price of in vitro plants with minimal size by achieving large-scale production. In particular, tissue-cultured succulents were developed into a Vivorium by replacing the tissue culture container and renewing the composition of the plant. This paper suggests a new indoor horticultural field, Vivorium, that can improve the current limitations of terrariums and make them more accessible to the general public. The introduction and popularization of new indoor gardening fields with the increase in single-person households and indoor activities in the Pandemic era can also improve psychological stability among people and in the society.