• Korean journal of communication and information
• /
• v.36
• /
• pp.399-422
• /
• 2006

Whether to reduce the current 'screen quota' for domestic films in conjunction with the FTA discussions between Korea and the United States is one of the hotly debated issues in Korea. Using Toulmin's Argumentation Model, this study attempts to trace the use of data and warrants for each pro and con claims as portrayed in newspaper editorial columns and to find its rhetorical significance. A total of 67 editorial columns were collected from 9 nationwide news dailies in Korea for the purpose. The rhetorical analysis of those articles showed that the major warrants used in each pro and con opinion were absent of the potential issues of the opponents, which inherently fails to invite rebuttals from the opposite sides. This conceptual wall in each argumentation models implies an inactive conversation and subsequent absence of clash between the pro and con argumentation fields. It is thus suggested for opinion writers to find more adequate evidences to support the data and warrants to hold persuasive power of their respective claims, ultimately to enhance the public discourse among citizens.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2014

There are several treatment options for rehabilitation of partial edentulism including the use of conventional or implant-retained fixed prostheses. However, such prosthetic options cannot always be possible because of compromised general and oral health (i.e. loss of supporting tissues, medical reasons, extensive surgical protocol and osseointegration failure of dental implant) as well as the affordability of patients. In some cases, removable partial denture provides easier access for oral hygiene procedures and the ability to correct discrepancies in dental arch relationships than implant fixed prosthesis. Recently, Implant Supported Removable Partial Denture (ISRPD) where to place dental implant in strategic position has been suggested to improve the limitation and shortcomings of conventional RPD. ISPRD can overcome mechanical limition of conventional RPD by placing implant in a favorable position and can be cost-effective, prosthetic solution for partially edentulous patients who are not immediate candidates for extensive, fixed implant supported restorations. Incorporation of dental implants to improve the RPD support and retention and to enhance patient acceptance should be considered when treatment planning for RPD. In this case, 59 years old male patient who received dental treatment of implant fixed prosthesis on both side of the upper jaw and implant overdenture on lower jaw showed implant abutment screw fracture on #15i and osseointegration failure on multiple number of implants. After removing failed implants, we planned ISRPD using #15i,24i,25i,26i and #23 natural tooth for RPD abutment. We fabricated #23 surveyed crown,#24i=25i=26i surveyed bridge and #15i gold coping for support,retention and stability for RPD. Periodic follow up check for 2years has been performed since the ISRPD delivery to the patient. No sign of screw loosening, fracture or bone resorption around abutment implants were detected.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2010

This study was carried out to investigate plow pan characteristics and to grasp the relationship between its particle size distribution fractal dimension ($D_m$) and water transport in paddy plow pan. Twenty four soil sampling sites with different management groups, ordinary and sandy-textured, were selected and investigated for physical properties of soils such as Yamanaka hardness in April, non-submerged condition, before rice seedling transplanting. The plow pan appearing depth and thickness was determined by penetration resistance profile. Undisturbed core samples with five replicates were sampled at plow pan layerwith 2 inch cores for measuring soil bulk density and saturated hydraulic conductivity. The particle size distribution fractal dimension ($D_m$) was calculated by the method following the procedure Tylerand Wheacraft (1992), using the USDA-based particle size analysis datawith fractions of 0-0.002, 0.002-0.053, 0.053-0.1, 0.1-0.25, 0.25-0.5, 0.5-1.0, and 1.0-2.0 mm. The plow pan of investigated fields appeared at a range from 5 to 30 cm depth, showing minimum value in sandy-textured management group and maximum value in ordinary management group. The thickness of plow pan were distributed from 5 to 17 cm, showing both minimum and maximum values in sandy-textured management group. Averagely, the plow appearing depth were deeper in ordinary management group than in sandy-textured management group, whereas the reverse in the thickness of plow pan. The particle size distribution fractal dimension ($D_m$) had higher value with finer textures, with higher fractality in coarser texture. Saturated hydraulic conductivities, $K_s$, of plow pan soils distributed from 0.5 to 1420 mm $day^{-1}$, having the highest value in sandy skeletal soils. The $K_s$ decreased with decreasing clay content and $D_m$, showing power function relationships. The coefficient of determination, $R^2$, of the fitted power functions were higher in $D_m$ as x-axis than in clay content. This means that $D_m$ could give us more effective estimation than clay content. Especially, sandy-textured paddy soils had higher $R^2$, compared to ordinary paddy soils. $K_s$ of relatively coarse-textured soils with less than 18%of clay content, therefore, was more dependent on particle size distribution than that of relatively fine-textured soils. From these results, it could be concluded that the fractal scaling gives us a unique quantity describing particle size distribution and then can be applied to estimate saturated hydraulic conductivity, especially more effective in coarse-textured soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.113-118
• /
• 2010

Due to diverse soil-forming environments and different purposes of the soil classification, numerous soil classification systems have been developed worldwide. The World Reference Base for Soil Resources (WRB) and the Soil Taxonomy of the United States are well-known in Korea. However, the German Soil Systematics based on somewhat different principles from the two former systems is little-known. The objective of this paper is therefore to give a short overview of the principles of the German Soil Systematics. The German Soil Systematics consists of a six-level hierarchical structure which comprises soil divisions, soil classes, soil types, soil subtypes, soil varieties, and soil subvarieties. Soils in Germany are firstly classified into one of four soil divisions according to the soil moist regime: terrestrial soils, semi-terrestrial soils, semi-subhydric/subhydric soils, and peats. Terrestrial soils are subdivided into 13 soil classes based on the stage of soil formation and the horizon differentiation. Semi-terrestrial soils are differentiated into four classes regarding the source of soil moist: groundwater, freshwater, saltwater, and seaside. Semi-subhydric/subhydric soils are subdivided into two classes: semi-subhydric and subhydric soils. Peats are classified into two classes of natural and anthropogenic origins. Classes can be compared to orders of the U.S. Taxonomy. Classes are subdivided into 29 soil types with regard to soil forming-processes for terrestrial soils, into 17 types with regard to the soil formation for semi-terrestrial soils, into five types with regard to the content of organic matter for semi-subhydric/subhydric soils, and also into five types with regard to peat-forming processes for peats. The soil mapping units in Germany are types, which can be additionally subdivided into ca. 220 subtypes, several thousands of varieties and subvarieties using detailed nuances of morphologic features of soil profile. Soil types can be compared to great groups of the U.S. Taxonomy.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.640-655
• /
• 2013

The purpose of this study is to analyze the cognitive demands level of the description about 'changes of state' and 'kinetic theory' on the 'science 1' textbooks by the 2007 revised curriculum. The three types of curriculum analysis taxonomy have been used to analyze the cognitive demands level of those contents on the 6 kinds of 'science 1' textbooks. The most higher level of cognitive demands about the concepts have been discussed here due to the focus of the concepts. The first, the cognitive demand level about 'three states of substances' depending on the motion of their particles in 6 textbooks is a early formal operational stage because of using by the application of kinetic theory. The second, the cognitive demand level about 'diffusion' and 'evaporation' is a early formal operational stage, because the particles move around faster so they can change their position. The third, the cognitive level of the pressure and volume in a gas is a early formal operational stage because of explaining only phenomena in simple correspondence with formal model of kinetic theory. And simple functional relationships beyond linear on the graph of the volume and pressure of gas, the volume and temperature of gas is also a early formal operational stage. The fourth, the cognitive level of the energy of heat by a change of the state is also a early formal operational stage because kinetic theory picture accepted as providing explanation by the change of the state. And functional relationships beyond linear on the graph of the explanation of boiling point of water in water is also a early formal operational stage.

• Clean Technology
• /
• v.24 no.1
• /
• pp.77-84
• /
• 2018

In this study, $Li_4Ti_5O_{12}$ anode materials for lithium ion battery were synthesized by dry ball-mill method. Polyvinyl chloride (PVC) as a carbon source was added to improve electrochemical properties. When the PVC was added after $Li_4Ti_5O_{12}$ formation, the spinel structure was well synthesized and it was confirmed by X-ray diffraction (XRD) experiments. When the carbon material was added before the synthesis and the heat treatment was performed, it was confirmed that a material having a different crystal structure was synthesized even when a small amount of carbon material was added. In the case of $Li_4Ti_5O_{12}$ without the carbon material, the electrical conductivity value was about $10{\mu}S\;m^{-1}$, which was very small and similar to that of the nonconductor. As the carbon was added, the electrical conductivity was greatly improved and increased up to 10,000 times. Electrochemical impedance spectroscopy (EIS) analysis showed that the size of semicircle corresponding to the resistance decreased with the carbon addition. This indicates that the resistance inside the electrode is reduced. According to the Cyclic voltammetry (CV) analysis, the potential difference between the oxidation peak and the reduction peak was reduced with carbon addition. This means that the rate of lithium ion insertion and deinsertion was increased. $Li_4Ti_5O_{12}$ with 9.5 wt% PVC added sample showed the best properties in rate capabilities of $180mA\;h\;g^{-1}$ at 0.2 C-rate, $165mA\;h\;g^{-1}$ at 0.5 C-rate, and $95.8mA\;h\;g^{-1}$ at 5 C-rate.

• Korean Journal of Agricultural Science
• /
• v.24 no.2
• /
• pp.207-217
• /
• 1997

This study was performed to evaluate the engineering properties of rice-husk ash concrete using normal portland cement, natural aggregates and rice-husk ash. The following conclusions were drawn; 1. The unit weight was in the range of $2,216{\sim}2,325kgf/m^3$, the weights of those concrete were decreased 1~6% than that of the normal cement concrete, respectively. 2. The highest strength was achieved by 10% rice-husk ash filled rice-husk ash concrete, it was increased 8% by compressive strength, 17% by tensile strength and 18% by bending strength than that of the normal cement concrete, respectively. 3. The ultrasonic pulse velocity was in the range of 3,252~4,016 m/s, which was showed about the same compared to that of the normal cement concrete. The highest ultrasonic pulse velocity was showed by 10% rice-husk ash filled rice-husk ash concrete. 4. The dynamic modulus of elasticity was in the range of $242{\times}10^3{\sim}306{\times}10^3kgf/cm^2$, which was showed about the same compared to that of the normal cement concrete. The highest dynamic modulus was showed by 10% rice-husk ash filled rice-husk ash concrete. 5. The static modulus of elasticity was in the range of $185{\times}10^3{\sim}275{\times}10^3kgf/cm^2$, which was showed about the same compared to that of the normal cement concrete. The poisson's number of rice-husk ash concrete was less than that of the normal cement concrete. The dynamic modulus was increased approximately 11~30% than that of the static modulus. 6. The durability was increased with increase of the content of rice-husk ash. The durability was increased 1.3 times by 10% rice-husk ash, 1.6times by 20% rice-husk ash filled concrete than that of the normal cement concrete. respectively.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.125-133
• /
• 1995

The crystal structure of dehydrated, partially Co(II)-exchanged zeolite X, stoichiometry Co2+Na+-X (Co41+Na10Si100Al92O384) per unit cell, has been determined from three-dimensional X-ray diffraction data gathered by counter methods. The structure was solved and refined in the cubic space group Fd3:α=24.544(1)Å at 21(1)℃. The crystal was prepared by ion exchange in a flowing stream using a solution 0.025 M each in Co(NO3)2 and Co(O2CCH3)2. The crystal was then dehydrated at 380℃ and 2×10-6 Torr for two days. The structure was refined to the final error indices, R1=0.059 and R2=0.046 with 211 reflections for which I > 3σ(I). Co2+ ions and Na+ ions are located at the four different crystallographic sites. Co2+ ions are located at two different sites of high occupancies. Sixteen Co2+ ions are located at the center of the double six-ring (site I; Co-O = 2.21(1)Å, O-Co-O = 90.0(4)°) and twenty-five Co2+ ions are located at site II in the supercage. Twenty-five Co2+ ions are recessed 0.09Å into the supercage from its three oxygen plane (Co-O = 2.05(1)Å, O-Co-O = 119.8(7)°). Na+ ions are located at two different sites of occupandies. Seven Na+ ions are located at site II in the supercage (Na-O = 2.29(1)Å, O-Na-O = 102(1)°). Three Na+ ions are statistically distribyted over site III, a 48-fold equipoint in the supercages on twofold axes (Na-O = 2.59(10)Å, O-Na-O = 69.0(3)°). Seven Na+ ions are recessed 1.02Å into the supercage from the three oxygen plane. It appears that Co2+ ions prefer sites I and II in order, and that Na+ ions occupy the remaining sites, II and III.

• Management & Information Systems Review
• /
• v.35 no.1
• /
• pp.51-68
• /
• 2016

In this paper, we aim to analyze the effect of accounting policy change subsequent to the adoption of K-IFRS in Korea, whereby the firms are required to recognize impairment losses on goodwill on a periodic basis rather than to amortize over a specific period. As a principle-based accounting standard, the K-IFRS expands the scope of fair value measurement with a view to enhance the relevance and timeliness of accounting information. In the same vein, intangibles with indefinite useful life, of which goodwill is an example, are subject to regulatory impairment tests at least once a year. Related literature on the impact of mandatory change in goodwill policy document that impairment recognition is more likely to be practiced opportunistically, mainly because managers have a greater discretion to conduct the tests under K-IFRS. However, existing literature examined the frequency and/or magnitude of the goodwill impairment before versus after the K-IFRS adoption, failing to notice the impairment symptoms at individual firm level. Borrowing the definition of impairment symptoms suggested by Ramanna and Watts(2012), this study performs a series of tests to determine whether the goodwill impairment recognition achieves the goal of communicating timelier information under the K-IFRS regime. Using 947 firm-year observations from domestic companies listed in KRX and KOSDAQ markets from 2008 to 2011, we document overall delays in recognizing impairment losses on goodwill after the adoption of K-IFRS relative to prior period, based on logistic and OLS regression analyses. The results are qualitatively similar in robustness tests, which use alternative proxy for goodwill impairment symptom. Afore-mentioned results indicate that managers are likely to take advantage of the increased discretion to recognize the impairment losses on goodwill rather than to provide timelier information on impairment, inconsistent with the goal of regulatory authority, which is in line with the improvement of timeliness and relevance of accounting information in conjunction with the full implementation of K-IFRS. This study contributes to the extant literature on goodwill impairment from a methodological viewpoint. We believe that the method employed in this paper potentially diminishes the bias inherent in researches relying on ex post impairment recognition, by conducting tests based on ex ante impairment symptoms, which allows direct examination of the timeliness changes between before and after K-IFRS adoption.

• Management & Information Systems Review
• /
• v.30 no.4
• /
• pp.293-314
• /
• 2011

The current study investigated the position of future strategy analyzed from the perspective of design management in relation to 10 strategic industries implemented through 3 steps based on promising growth and advancement of Busan industries and evidence provided from a study on the development program of design industry in Busan. It elucidated the role of design industry as a key role from the perspective of design management in an age of creative revolution of futures values. It analyzed the associations between composition of future strategy and design industry in 10 strategic industries of Busan, and explained the relationships with the strategic industries. The perspective of design management involves that design as a ground of values is an industry of the future values, which performs a key strategic function and role, and a theoretical investigation examined the relationships between main functions of design management and business management. Chapter 3 organized items proposed in the design development program in Busan and examined goals and systems which become basic formation of establishment of design strategy in Busan and conditions for design industry in the associations with strategic industry. Chapter 4 described priorities of practicability by step through analyzing and grouping top 30 projects in Busan industry including meanings as key strategy, position relations, and policy priorities by analyzing elements of design management of strategic industry and describing and analyzing the concept of promoting Busan design. The theme of the present study is to change perception of design management as a key value and a condition to decide creativity industry into future industry and to evaluate vision of Busan design industry and meanings proposed as proceeding strategy. The early 21st century is an age when agrarian society has changed into industrial society is dominated by knowledge economy of the information revolution and one should prepare for the growth phase of creative innovation based on creative revolution of the 4th wave of creative society by design management which has become a center in 2000s on the whole. With the advent of creative paradigm and based on the function and role of the current creative economy age new innovation DNA of design management will be created. Design process has changed through information and knowledge-oriented trends of digital through convergence between industries from industrial design to convergence of industries, and it is expected that integrated design of value creation using information and technology will play a key role in Busan design industry development and top 10 strategic industries.