• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.556-566
• /
• 2010

A new kinetic spectrophotometric method is developed for the measurement of Mn(II) in natural water samples. The method is based on the catalytic effect of Mn(II) with the oxidation of Gallocyanin by $KIO_4$ using nitrilotriacetic acid (NTA) as an activation reagent at 620 nm. The optimum conditions obtained are $4.00{\times}1^{-5}\;M$ Gallocyanin, $KIO_4$, $1.00{\times}10^{-4}\;M$ NTA, 0.1 M HAc/NaAc buffer of pH = 3.50, the reaction time of 5 min and the temperature of $30^{\circ}C$. Under the optimum conditions, the proposed method allows the measurement of Mn(II) in a range of $0.1\;-\;4.0\;ng\;mL^{-1}$ and with a detection limit of down to $0.025\;ng\;mL^{-1}$. The recovery efficiency in measuring the standard Mn(II) solution is in a range of 98.5 - 102%, and the RSD is in a range of 0.76 - 1.25%. The newly developed kinetic method has been successfully applied to the measurement of Mn(II) in both some environmental water samples and certified standard reference river water sample, JAC-0031 with satisfying results. Moreover, few cations and anions interfere with the measurement of Mn(II). Compared with the other catalytic-kinetic methods and instrumental methods, the proposed kinetic method shows fairly good selectivity and sensitivity, low cost, cheapness, low detection limit and rapidity. It can easily and successfully be applied to the real water samples with relatively low salt content and complex matrices such as bottled drinking water, cold and hot spring waters, lake water, river water samples.

• Clean Technology
• /
• v.13 no.2
• /
• pp.143-150
• /
• 2007

The objective of this study is to develop hydrocarbon-based cleaning agents by blending paraffins, glycol ethers and siloxanes in oder to effectively clean contaminants such as flux, solder and grease. And the effect of cleaning ability by wetting index, aniline points and solubility parameter of the formulated hydrocarbon-based cleaning agents were studied in this work. The formulated hydrocarbon-based cleaning agents were prepared on the base of physical properties of their individual components. Wetting indexes and aniline points of their were measured through experiments and solubility parameters of their were calculated based on the Hansen's equation. In this study, evaluation of cleaning ability by cleaning agents were carried out using contaminants such as flux, solder, and grease. The experimental results showed that the cleaning ability of the formulated cleaning agents was excellent in cleaning contaminants such as flux, solder and grease and that the influencing parameters on their cleaning efficiency were found to be different according to contaminant types. MC($20.3MPa^{1/2}$), DF-1 ($24.2MPa^{1/2}$) and DF-2($21.5MPa^{1/2}$) with similar solubility parameter as flux ($21.3MPa^{1/2}$) showed 100% cleaning efficiency within 3 minutes in flux cleaning. And CFC-113, MC and 1,1,1-TCE with low aniline point less than $-20^{\circ}C$ showed excellent cleaning efficiency in solder cleaning. DG-1($16.2\;MPa^{1/2}$) and DG-2($15.5\;MPa^{1/2}$) with similar solubility parameter as grease($15.0{\sim}17.0\;MPa^{1/2}$) showed relatively low cleaning efficiency of grease, but CFC-113 and MC with high wetting index and low aniline point showed good cleaning efficiency in grease cleaning. As a result of this study, the hydrocarbon-based cleaning agents alternative to regulated cleaning agents such as CFC-113, 1,1,1-TCE and MC were able to be developed through properly blending paraffins, glycol ethers and siloxanes for cleaning flux, solder and grease. And it can be shown that various influencing parameters of cleaning efficiency such as wetting index, aniline point, solubility parameter and etc. of the non-aqueous cleaning agent should be reviewed for prediction of their cleaning ability and can be applied to formulation of cleaning agents.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.131-150
• /
• 2017

The purpose of this study is to observe the spread pattern of open source software (OSS) while establishing relations with surrounding actors during its operation period. In order to investigate the change pattern of participants in the OSS, we use a netnography on the basis of online data, which can trace the change patterns of the OSS depending on the passage of time. For this, the cases of three OSSs (e.g. jQuery, MooTools, and YUI), which are JavaScript frameworks, were compared, and the corresponding data were collected from the open application programming interface (API) of GitHub as well as blog and web searches. This research utilizes the translation process of the actor-network theory to categorize the stages of the change patterns on the OSS translation process. In the project commencement stage, we identified the type of three different OSS-related actors and defined associated relationships among them. The period, when a master commences a project at first, is refined through the course for the maintenance of source codes with persons concerned (i.e. project growth stage). Thereafter, the period when the users have gone through the observation and learning period by being exposed to promotion activities and codes usage respectively, and becoming to active participants, is regarded as the 'leap of participants' stage. Our results emphasize the importance of promotion processes in participants' selection of the OSS for participation and confirm the crowding-out effect that the rapid speed of OSS development retarded the emergence of participants.

• Management & Information Systems Review
• /
• v.39 no.3
• /
• pp.1-16
• /
• 2020

The current tariff return system requires tax officials to calculate tax amount by themselves and pay the tax amount on their own responsibility. In other words, in principle, the duty and responsibility of reporting payment system are imposed only on the taxee who is required to calculate and pay the tax accurately. In case the tax payment system fails to fulfill the duty and responsibility, the additional tax is imposed on the taxee by collecting the tax shortfall and imposing the tax deduction on For this reason, item classifications, together with tariff assessments, are the most difficult and could pose a significant risk to entities if they are misclassified. For this reason, import reports are consigned to customs officials, who are customs experts, while paying a substantial fee. The purpose of this study is to classify HS items to be reported upon import declaration and to indicate HS codes to be recorded on import declaration. HS items were classified using the attached image in the case of item classification based on the case of the classification of items by the Korea Customs Service for classification of HS items. For image classification, CNN was used as a deep learning algorithm commonly used for image recognition and Vgg16, Vgg19, ResNet50 and Inception-V3 models were used among CNN models. To improve classification accuracy, two datasets were created. Dataset1 selected five types with the most HS code images, and Dataset2 was tested by dividing them into five types with 87 Chapter, the most among HS code 2 units. The classification accuracy was highest when HS item classification was performed by learning with dual database2, the corresponding model was Inception-V3, and the ResNet50 had the lowest classification accuracy. The study identified the possibility of HS item classification based on the first item image registered in the item classification determination case, and the second point of this study is that HS item classification, which has not been attempted before, was attempted through the CNN model.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.473-479
• /
• 2010

This study purposed to survey D university students' perception of kindness in their use of dental care services in an area of Gyeonggido. For this purpose, we conducted a questionnaire survey of 502 students from October 2, 2008 to March 6, 2009 and analyzed the data. Results obtained from this study are as follows. 1. Of the subjects, 71.3% were female, 67.7% were at the age of 20 or younger, and 89.2% had experience in visiting a dental clinic. Among the subjects who had experience in visiting a dental clinic, 31.1% replied that they were highly interested in oral health, and to the question on the selfperceived current oral health condition, 35.1% replied that there was something wrong in their oral health condition. 2. With regard to correlation between general characteristics and interest in oral health, 79.9% of the male subjects and 83.2% of the female ones were highly interested in oral health. According to age, interest in oral health was highest among those aged 26 or older 92.0%. 3. With regard to correlation between general characteristics and oral health condition, if the presence of dental caries or periodontal disease was considered an indicator of poor oral health, 66.0% of the male subjects and 70.9% of the female ones appeared unhealthy, 72.0% of students aged 26 or older showed satisfaction. 4. The most frequent reason for not visiting a dental clinic was 'Not sick' 34.6%, and among those who had experience, the most frequent reason for visiting was 'To get treatment of sick teeth' 63.0%. With regard to the perceived kindness of dentist and dental hygienist, 40.6% and 45.8% of the subjects, respectively, were highly satisfied. The most frequent reason for satisfaction was 'Comfortable with patient reception' 34.4% and the most frequent reason for dissatisfaction was 'Explain treatment insufficiently' 30.7%. 5. As to perceived kindness according to gender, 60.9% of the male subjects and 56.1% of the female ones were satisfied with dentist's kindness, and 66.9% and 59.6%, respectively, were satisfied with dental hygienist's kindness. According to age, 62.5% of students aged 26 or older showed satisfaction with dentist's kindness and 78.3% of them with dental hygienist's kindness. 6. As to perceived kindness according to correlation between interest in oral health and current selfperceived oral condition, the kindness of dentists(68.0%) and hygienists(67.8%) was perceived higher when interest in oral health was high and not very interested and the kindness of dentists(50.0%) and hygienists(66.78%) when selfperceived oral condition was healthy, and the difference was statistically significant (p<.022 and p<.023, respectively).

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.241-250
• /
• 2010

The purpose of this study, which was processed from March $22^{nd}$ to April $9^{th}$ of 2010, was to figure out recognition, well-formed instructions, and Practical application about dental hygiene devices based on the dental health characteristics of 350 adults who dwell in Busan and Gyeongnam regions. Also, this study recommended the adults to use dental hygiene devices and provided such devices to help individuals take care of their dental health at home. The collected data was statistically processed with a statistics SPSS (Statistical Packages for Social Science 14.0. SPSS Inc. USA) program. First of all, in order to demonstrate the characteristics of the sample population statistics and that of the descriptive data, frequency analysis was performed and to find out the relationship between variations of the dental health, Chi-squared test through Crosstabs was operated. According to the study, recognition and Practical application of dental hygiene devices were very low. Therefore, public announcement about necessity and effectiveness of such devices should be reinforced nationwide and instructions on choosing the right device and using of the dental hygiene devices based on patients' conditions by dental hygienic human efforts gathered from dental health organization should be carried out.

• Journal of dental hygiene science
• /
• v.17 no.2
• /
• pp.134-141
• /
• 2017

This study examined 191 pregnant women before delivery in an obstetrics and gynecology clinic in North Gyeongsang Province from May to September 2016 by using a questionnaire after obtaining informed consent for voluntary participation in the study. The study was performed to investigate the association of depression with sociodemographic characteristics, pregnancy-related characteristics, social support, sleep quality and Oral Health Impact Profile (OHIP) in pregnant women. The prevalence of depression among the pregnant women was 25.1% in the healthy group and 74.9% in the depression group. The depression level was significantly higher in women in the depression group who were unsatisfied with their marriage life, had no occupation, had lower social support, had poor sleep quality and had higher OHIP scores. The results of the logistic regression analysis indicated that, the risk ratio for more severe depression was significantly higher in the group with no experience of miscarriage and induced childbirth than in the group with childbirth experience. Conversely, the risk ratio for more severe depression was significantly lower in the group with high social support than in the group with low social support. Depression in the respondents significantly positively correlated with sleep quality and OHIP score but significantly negatively correlated with social support. The multiple regression analysis revealed that the depression level was significantly higher by 22.3% among pregnant women with lower marital satisfaction, no childbirth experience, lower social support and higher OHIP scores. In summary, depression was related to marital satisfaction, childbirth experience, social support, and OHIP score, among others, in pregnant women in this study. Therefore, further investigation is warranted to construct programs and measures that will help build positive thinking by designing and verifying a three-dimensional study model by taking into consideration various variables to reduce the incidence of depression in pregnant women.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.81-93
• /
• 2020

This study is based on workplace learning, which has revealed its significant influence in the previous enterprise case studies. Why do small business owners have the opportunity to participate in workplace learning based on authenticity? It was intended to clarify whether it was necessary and to increase the growth and development potential of small business owners based on its contents. Moreover, this study is focused on identifying the influence of workplace learning on management performance through this series of processes. In order to investigate the influence of small enterprise workplace learning on management performance, research hypotheses were set based on a review of previous studies, and empirical analysis was carried out. A total of 203 questionnaires were empirically analyzed using SPSS 18.0 program. As a result, first, workplace learning had partially significant positive influence on job satisfaction. Second, workplace learning had significant positive influence on management performance. Third, job satisfaction had significant positive influence on management performance. Fourth, job satisfaction had partial mediating effect in the relationship between workplace learning and management performance. The analysis result showed that among sub-factors of workplace learning, only formal learning did not affect job satisfaction and that job satisfaction did not have mediating effect in the relationship between formal learning and management performance. According to analysis, this was because in poor small enterprise environments, opportunities to participate in formal learning like external training or in-house training were not kept. In other words, poor small enterprise environments were plainly revealed from the managerial, economic and social standpoint. Therefore, there is a need to establish the foundation of growth for them to solve problems and develop win-win development capabilities and an institutional system that can make a contribution to policy and education, and management, by helping small enterprises keep opportunities to participate in workplace learning. In spite of these significant study results, there can be a limitation. For improving this limitation, further research will need to target diverse fields focusing on samples, which can explain relations of many different variables. Also, working-level relation research connected to studies that can highly enhance management performance will be required.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.789-796
• /
• 2008

This study was carried out to investigate the effect of the addition of red wine on the color, water activity, hardness, pH, 2-thiobarbituric acid (TBARS) value, volatile basic nitrogen (VBN) content and total plate count of beef jerky during storage at room temperature for 4 weeks. Beef jerky was prepared using three variations: beef jerky containing 50 mL water (T0), beef jerky containing a combination of 25 mL water and 25 mL red wine (T1) and beef jerky containing 50 mL red wine (T2). The lightness ($L^*$) was the lowest at the 4-week storage period, and the $L^*$ value of T1 and T2 were lower than that of T0 (p<0.05). The redness ($a^*$) tended to decrease during storage, with the $a^*$ value of T1 and T2 being higher than that of the T0 (p<0.05). The yellowness ($b^*$) during storage was not changed, and the $b^*$ value was not significantly different among the different samples tested. The water activity decreased during storage and T0, T1 and T2 was 0.57, 0.57 and 0.60 after 4 weeks of storage, respectively(p<0.05). The hardness increased during storage and the hardness of T2 stored for 4 weeks was lower than that of T0 and T1 (p<0.05). The pH was decreased with an increase in storage time (p<0.05). The TBARS value increased during storage and the TBARS value of T1 and T2 stored for 4 weeks was lower than that of T0 (p<0.05). The VBN content increased during storage and T2 stored for 4 weeks showed the lowest (p<0.05). The total plate count tended to increase during storage, and T0 stored for 4 weeks showed the highest (p<0.05).