• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.242-244
• /
• 2003

The functional test of protection relays is divided into two kind of test types; the steady-state test and dynamic test. Because the steady-state test is comparatively easy, this test is used to test the characteristics of the relaying elements, operating values, resetting values and etc. using equipment such as Doble. But the dynamic test has to be performed on the test environment with RTDS(real time digital simulator) because of the dynamic characteristics of real protection relays. Therefore, it is not usually easy to perform dynamic test of relays using power system simulation tool based on PC(personal computer) such as PSCAD/EMTDC. This paper discusses how to develop and implement a test model and user-defined components that can be performed dynamic test using PSCAD/EMTDC.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.82-84
• /
• 2003

This paper presented a method to develop a relay model by the user-written model function of PSS/E. As for the voltage instability, although generator current limiters, transformer's tap-changers and dynamic loads have been considered as the dominant components, the protection system is also very important because it may influence the system's dynamic behaviour. Hence a distance relay model implemented with the suggested method was added, and then the operating characteristics of the distance relay under the voltage instability condition were investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.709-730
• /
• 2017

To address the challenge of unprecedented growth in mobile data traffic, ultra-dense network deployment is a cost efficient solution to offload the traffic over some small cells. The overlapped coverage areas of small cells create more than one candidate access points for one mobile user. Signal strength based user association in IEEE 802.11 results in a significantly unbalanced load distribution among access points. However, the effective bandwidth demand of each user actually differs vastly due to their different preferences for mobile applications. In this paper, we formulate a set of non-linear integer programming models for joint user association control and user demand guarantee problem. In this model, we are trying to maximize the system capacity and guarantee the effective bandwidth demand for each user by soft-association control with a software defined network controller. With the fact of NP-hard complexity of non-linear integer programming solver, we propose a Kernighan Lin Algorithm based graph-partitioning method for a large-scale network. Finally, we evaluated the performance of the proposed algorithm for the edge users with heterogeneous bandwidth demands and mobility scenarios. Simulation results show that the proposed adaptive soft-association control can achieve a better performance than the other two and improves the individual quality of user experience with a little price on system throughput.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.277-291
• /
• 2016

Objective: The aim of this study is to propose a unit touch gesture model, which would be useful to predict the performance time on mobile devices. Background: When estimating usability based on Model-based Evaluation (MBE) in interfaces, the GOMS model measured 'operators' to predict the execution time in the desktop environment. Therefore, this study used the concept of operator in GOMS for touch gestures. Since the touch gestures are comprised of possible unit touch gestures, these unit touch gestures can predict to performance time with unit touch gestures on mobile devices. Method: In order to extract unit touch gestures, manual movements of subjects were recorded in the 120 fps with pixel coordinates. Touch gestures are classified with 'out of range', 'registration', 'continuation' and 'termination' of gesture. Results: As a results, six unit touch gestures were extracted, which are hold down (H), Release (R), Slip (S), Curved-stroke (Cs), Path-stroke (Ps) and Out of range (Or). The movement time predicted by the unit touch gesture model is not significantly different from the participants' execution time. The measured six unit touch gestures can predict movement time of undefined touch gestures like user-defined gestures. Conclusion: In conclusion, touch gestures could be subdivided into six unit touch gestures. Six unit touch gestures can explain almost all the current touch gestures including user-defined gestures. So, this model provided in this study has a high predictive power. The model presented in the study could be utilized to predict the performance time of touch gestures. Application: The unit touch gestures could be simply added up to predict the performance time without measuring the performance time of a new gesture.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.214-219
• /
• 2017

Magnetic separators that clean the fluid stream from impurities, protect the installations in numerous industries. This paper introduces a graphical user interface (GUI) which proposes an optimized coil separating magnetic particles with a radius from 1 up to 500 µm. High gradient magnetic fields are employed in an arbitrary user defined fluidic channel which is made of a nonmetallic material. The effects of coil parameters are studied and adjusted to design an optimum coil with a minimum Ohmic loss. In addition, to design the coil scheme based on the particle movements, a mathematical particle-tracing model within the fluid channels has been utilized. In comparison to conventional magnetic separators, this model is reconfigurable by the user, produces a weaker magnetic field, allows for continuous purifying and is easy to install, with high separation efficiency. The presented GUI is simple to use, where the coil's manufacturing limitations can be specified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.615-622
• /
• 2010

In this study, a 0D multizone spray-combustion model is developed for the estimation of the performance and NOx emission of medium-sized direct-injection marine diesel engine. The developed combustion model is coupled with the commercial 1D cycle-simulation model, Boost, to analyze the entire engine system, including the intake and exhaust. The combustion model code was generated using Fortran90, and the model was coupled with Boost by connecting the generated code to a user-defined high-pressure cycle (UDHPC) interface. Simulation was performed for two injectors (8 holes and 10 holes) and two engine loads (50% and 100%), and the results of simulation were in good agreement with engine performance test.

• Journal of Digital Contents Society
• /
• v.11 no.4
• /
• pp.529-536
• /
• 2010

Currently many people are awfully concerned about smart device in domestic and foreign mobile market. The need of smart device has been rapidly increased. Unlike a feature phone smart devices provide us with an intuitive interface which is easy to control. They are enable to smoothly interact between user and device. Though higher market outlook, there is a lack of empirical research on user interface in touch screen based on smart device. In this paper, we propose the touch interface conceptual model concentrating on user based on the result of previous research. Materials of this research are three kinds of smart devices which are currently released. Through expert's depth interview and observation of user, user's cognitive actions in smart device are defined. Since the method of the touch interface which is suitable for the action has been derived, we have proposed the conceptual model of user's cognitive action. This research imply to offer the excellent design guideline in order to implement touch interface to optimize user experience in touch screen based on smart device to release in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5849-5855
• /
• 2011

As application development environment changes rapidly, importance of user interface design is increasing. Usually, most of designers are clustering by subjective method of individual to define objects that have relativity in design interface. But, interface which is designed without particular rules just adds inefficiency and complexity of business to user who use this system. Therefore, in this paper, we propose an object oriented design model that allows for flexible development by formalizing the user interface prototype in any GUI environment. The visual cohesion of the user interface is a new set of criteria which has been studied in relation to the user interface contents, and is founded on the basis of the cohesion of the interface as defined using basic software engineering concepts. The visual cohesion includes the issue of how each unit is arranged and grouped, as well as the cohesion of the business events which appear in the programming unit. The interface will become easier to understand and use if the business events are grouped by their inter-relevance within the user interface.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.4
• /
• pp.111-122
• /
• 2008

Web service is defined to support interoperable machine to machine interaction over a network and defined as distributed technologies. Recently in web service environment, security has become one of the most critical issues. An attacker may expose user privacy and service information without authentication. Furthermore, the users of web services must temporarily delegate some or all of their behalf. This results in the exposure of user privacy information by agents. We propose a delegation model for providing safety of web service and user privacy in ubiquitous computing environments. In order to provide safety of web service and user privacy, XML-based encryption and a digital signature mechanism need to be efficiently integrated. In this paper, we propose web service management server based on XACML, in order to manage services and policies of web service providers. For this purpose, we extend SAML to declare delegation assertions transferred to web service providers by delegation among agents.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.367-374
• /
• 2003

A mediator-wrapper system, which is one of integration methods of heterogeneous databases, preserves a virtual integrated view rather than physical movement of the contents of each database. In order for a mediator to preserve a virtual integrated view, it requires the schema manager of the wrapper which communicates with local databases. This paper presents a schema manager of a wrapper that provides a mediator with XML schema which is generated from relational database schema. The XML schema manager supports a user-defined XML view. We present the view tree model which is used for materializing the use-defined XML view to generate XML schema, and the conversion algorithm based on the proposed view tree model. This model is can be uniformly applied to all schema managers of heterogeneous information sources.