• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.57-61
• /
• 2017

The National research networks exist to support advanced science and technology in each country. The national research network must meet the requirements of science and technology in each field and continuously develop around the continuously changing environment. In recent years, demand for data - oriented science and technology research forms has been increasing. To cope with this demand, advanced national research networks are establishing mid - to long - term strategies. In this paper, the status of the advanced research network and trends and requirements of the national research network are analyzed from the viewpoint of the change of the research network environment, the change of science / technology, and the change of industry and life. In order to respond to the analyzed requirements, we propose mid - to long - term development directions and plans for establishing future network backbone, providing user - centered collaborative research environment, providing global collaborative network service, and providing high - tech science and technology research data information protection service.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.5
• /
• pp.69-77
• /
• 2019

The objective of this study was to calibrate and validate the HSPF (Hydrological Simulation Program-Fortran) model for estimating the runoff of the Hapcheon dam watershed. Spatial data, such as watershed, stream, land use, and a digital elevation map, were used as input data for the HSPF model. Observed runoff data from 2000 to 2016 in study watershed were used for calibration and validation. Hydrologic parameters for runoff calibration were selected based on the user's manual and references, and trial and error method was used for parameter calibration. The $R^2$, RMSE (root-mean-square error), RMAE (relative mean absolute error), and NSE (Nash-Sutcliffe efficiency coefficient) were used to evaluate the model's performance. Calibration and validation results showed that annual mean runoff was within ${\pm}4%$ error. The model performance criteria for calibration and validation showed that $R^2$ was in the rang of 0.78 to 0.83, RMSE was 2.55 to 2.76 mm/day, RMAE was 0.46 to 0.48 mm/day, and NSE was 0.81 to 0.82 for daily runoff. The amount of inflow to Hapcheon Dam was calculated from the calibrated HSPF model and the result was compared with observed inflow, which was -0.9% error. As a result of analyzing the relation between inflow and storage capacity, it was found that as the inflow increases, the storage increases, and when the inflow decreases, the storage also decreases. As a result of correlation between inflow and storage, $R^2$ of the measured inflow and storage was 0.67, and the simulated inflow and storage was 0.61.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.2
• /
• pp.1-12
• /
• 2019

Open space planners and designers should consider scientific and quantified functions of trees when they have to locate where to plant the tree. However, until now, most planners and designers could not consider them because of lack of tool for considering scientific and quantitative tree functions. This study introduces a tree location supporting tool which focuses on the multi-objective including scientific function using ACO (Ant colony optimization). We choose shading effect (scientific function), shielding, and openness as objectives for test application. The results show that when the user give a high weight to a particular objective, they can obtain the optimal results with high value of that objective. When we allocate higher weight for the shading effect, the tree plans provide larger shadow value. Even when compared with current tree plan, the study result has a larger shading effect plan. This result will reduce incident radiation to the ground and make thermal friendly open space in the summer. If planners and designers utilize this tool and control the objectives, they would get diverse optimal tree plans and it will allow them to make use of the many environmental benefits from trees.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.75-84
• /
• 2018

This study analyzed users' acceptance and intention to use in addition to needs and preferences of smart home technologies, and identified the differences in technology preference and acceptance by different factors. The subjects were residents in the 40s and 60s residing in the Seoul or suburbs of Seoul, and questionnaires were conducted in the 40s while interviews with questionnaires were conducted in the 60s. A total of 105 questionnaires were used as data, and frequency, mean, crossover, independent sample t test, one-way ANOVA and multiple regression analysis were performaed using SPSS23. The results of this study are as follows. First, hypertension, hyperlipidemia and hypercholesterolemia were the most common diseases among respondents and if there was no discomfort, they would like to continue living in the homes of the current residence. Therefore, the direction of smart home development should support the daily living and health care so that residents can live a healthy life for a long time in their living space. Second, the technologies that residents most need were a control technology of residential environments and a monitoring technology of residents' health and physiological changes. The most preferred sensor types are motion sensors and speech recognition while video cameras have a very low preference. Third, technology anxiety was the most significant factor influencing intention to accept smart home technology. The greater the technology anxiety is, the weaker the acceptance of technology. Fourth, when applying smart residential technology in homes, various resident characteristics should be considered. Age and technology intimacy were the most influential variables, and accordingly there were differences in technology preference and acceptance. Therefore, a user-friendly smart home plan should be done in the consideration of the results.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.23-34
• /
• 2019

The façade, a fundamental function as a skin that protects human life from external environment such as cold and hot weather, snow, rain, and wind, etc, has served as a media for communication between indoor space of the building and outside space. From the media for communication point of view, the approach to envelope design, in which environmental elements are transmitted internally through the filtering of external environments, has been evolving in various ways from the past to the present. Today, modern architecture technologies including curtain wall systems and user-friendly computer programming and environmental analysis programs demonstrate a differentiated approach to envelope design related to the indoor environment. For this reason, it is worth noting that the envelope design factors and trends that appear variously in the UNStudio's projects before and after the 2000s. The factors reflected in the envelop design in conjunction with the indoor environment obtained through the case study of the UNStudio's office projects were daylight environment, thermal environment, ventilation, noise, privacy and view, and consideration for daylight environment and thermal environment was reflected in many cases through the case study. Looking at the changes in the diagrams in order of year, it can be seen that the envelope design using the environmental analysis tool has been performed since 2006. This is a clue to show the envelop design changes from the conceptual method to the data-based one. The diagrams and analysis results related to the envelop design showed that the thermal environment related to solar radiation was the most, and no diagrams and analysis related to the indoor illumination were found. Since 2010, PV panel installation has been shown in the envelope design, which can be found in the increased efficiency of PV panels due to the technological advances and the decrease in production cost.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.327-332
• /
• 2022

The Korea Augmentation Satellite System (KASS) is the Satellite-Based Augmentation System (SBAS) under development in Korea. KASS navigation service support navigation Safety of Life (SoL) service. KASS signal provides corrections to Global Positioning System (GPS) data received from KASS Reference Stations (KRS) and is broadcast form Geostationary Earth Orbiting (GEO) satellites to KASS users and is used by GPS/SBAS user equipment to improve the accuracy, availability, continuity and integrity of the navigation solution. Seven KRS's collect the satellite data and send them to the KASS Processing Stations (KPS) for the generation of the corrections and the monitoring the integrity. For performing its computation the KPS needs to know accurate and reliable KRS antennas coordinates. These coordinates are provided as configuration parameters to the KPS. This means that the reference frame in which the KPS work is the one represented by the set of coordinates provided as input. Therefore, the activity to maintain the accuracy of the KRS antenna coordinates is necessary, knowing that coordinates can evolve due to earth plates movements or earthquakes. In this paper, we analyzed the geodetic survey results for KRS antenna coordinates from Site Acceptance Test (SAT) #1 in December 2020 to August 2022. In the future, it is expected that these activities and planning for KRS coordinates maintenance will be produced and provided to KASS system operators for KPS configuration updates during the KASS lifetime of 15 years. Through these maintenance activities, it is expected that monitoring and analysis of unpredictable events such as earthquakes and seism will be possible in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1676-1681
• /
• 2020

Collecting and managing information on all-round activities of students not only helps to improve school life adjustment and satisfaction, but also serves as the basis for preventive student support for academic warnings or dropouts. Therefore, in guiding students, it is necessary to integrate various information of students and provide them to the instructor quickly and accurately. In this study, in the special environment of an organization in which student information is scattered in several systems, a system model is proposed that not only integrates and provides student information to instructors quickly, but also saves cost and effort. And we tested the effectiveness of the proposed system model by developing a simple web page. As a result, it was confirmed that the proposed model provided information necessary for student guidance in an integrated, multifaceted, and instantaneous manner, and that user satisfaction was improved through an improved UI.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.4
• /
• pp.131-136
• /
• 2019

People with compromised visual ability suffer from many inconveniences in daily life, such as distinguishing colors, identifying currency notes and realizing the atmospheric temperature. Therefore, to assist the visually impaired people, we propose a system by utilizing optical and infrared cameras. In the proposed system, an optical camera is used to collect features related to colors and currency notes while an infrared camera is utilized to get temperature information. The user is enabled to select the desired service by pushing the button and the appreciate voice information are provided through the speaker. The device can distinguish 16 kinds of colors, four different currency notes, and temperature information in four steps and the current accuracy is around 90%. It can be improved further through block-wise input image, machine learning, and a higher version of the infrared camera. In addition, it will be attached to the stick for easy carrying and to use it more conveniently.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.73-78
• /
• 2020

Musculoskeletal disease is often caused by sitting down for long period's time or by bad posture habits. In order to prevent musculoskeletal disease in daily life, it is the most important to correct the bad sitting posture to the right one through real-time monitoring. In this study, to detect the sitting information of user's without any constraints, we propose posture measurement system based on multi-channel pressure sensor and CNN model for classifying sitting posture types. The proposed CNN model can analyze 5 types of sitting postures based on sitting posture information. For the performance assessment of posture classification CNN model through field test, the accuracy, recall, precision, and F1 of the classification results were checked with 10 subjects. As the experiment results, 99.84% of accuracy, 99.6% of recall, 99.6% of precision, and 99.6% of F1 were verified.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.45-50
• /
• 2021

With the recent development of IT technology, research and interest in various bio-signal measuring devices are increasing. But studies related to ECG(electrocardiogram), which is one of the most representative bio-signals, particularly arrhythmic signal detection, are incomplete. Since arrhythmia has various causes and has a poor prognosis after onset, preventive treatment through early diagnosis is best. However, the 24-hour Holter electrocardiogram, a tool for diagnosing arrhythmia, has disadvantages in the limitation of use time, difficulty in analyzing motion artifact due to daily life, and the user's real-time alarm function in danger. In this study, an ECG and pulse monitoring device capable of continuous measurement for a long time, a real-time monitoring app, and software for analysis were developed, and the trend of the measured values was confirmed. In future studies, research on derivation of quantitative results of ECG signal measurement analysis is required, and further research on the development of an arrhythmic signal detection algorithm based on this is required.