• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.269-277
• /
• 2007

In this paper, we present a efficient transcoding method from MPEG-2 to H.264. The proposed transcoder is the transcoding method for spatial domain which consists of MPEG-2 decoder part and H.264 encoding part. In transcoder, we can get useful information to estimate less probable modes from MPEG-2 decoder. Using this information, H.264 encoder chooses the macroblock mode of I-frame and P-frame adaptively to reduce the whole complexity of the transcoder. Our experimental result shows that the proposed algorithm can archive about $30\sim60%$ computational saving without significant degradation of visual quality and increasing of bit rate.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.139-144
• /
• 2002

Ti-50.9at%Ni wires were welded using pulsed YAG laser. The laser welded wires were tested for investigating the shape memo교 effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.136-141
• /
• 1997

Rotary compressor is one of the most useful mechanism that is widely applied in refrigeration and air-conditioning systems. That is due to character of rotary compressor -compact, simple etc.While there is a lot of strong points, there is room for improvement because it is composed of many parts which have wear problem, friction losses and leakage. In this paper, theoretical investigation about vane and slot parts at which we observe severe wear is carried out. Through the study of lubrication, the behavior of vane during one cycle can be predicted and the cause of wear at slot will be discovered. To solve the equations, fletcher-powell method is applied. The result of analysis show that vane bevell to the slot part with discharge port before rotation of shaft is 180 degree and bevell to the slot part with suction port after 180 degree. The motion of vane is divided 3 mode that depends on behavior of vane. This paper define the first mode when vane tilt to the compression chamber, the second mode when vane tilt to the suction chamber, and the third mode when vane move straightway.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.33.2-34
• /
• 2016

The unification model of active galactic nuclei invokes the presence of a thick molecular torus that hides the broad emission line region from a line of sight toward observers with low latitude. It is expected that the illuminated side of the molecular torus may be photodissociated by strong far UV radiation from the central AGN, forming an H I region with a high neutral column density. We propose that the Rayleigh scattering optical depth of this HI region can be significant for most broad $Ly{\alpha}$ line photons with the Doppler factor not exceeding 104 km s-1. Rayleigh scattered $Ly{\alpha}$ photons can be characterized by strong linear polarization depending on their scattering optical depth. We performed Monte Carlo simulations of polarized radiative transfer of $Ly{\alpha}$ adopting simple scattering geometries relevant to the unification model of AGN. We find that for a low torus the Rayleigh scattered $Ly{\alpha}$ is polarized in the direction parallel to the symmetry axis with the polarization degree dependent on wavelength. In the case of a high torus, the core part of $Ly{\alpha}$ is polarized in the direction perpendicular to the symmetry axis whereas the wing part is parallelly polarized. We conclude that careful spectropolarimetry around $Ly{\alpha}$ can be useful in testing the AGN unification model.

• Physical Therapy Korea
• /
• v.23 no.4
• /
• pp.47-54
• /
• 2016

Background: Losing balance during locomotive actions becomes an increasing threat to both the community-dwelling elderly and elderly with Parkinson disease (PD). Those with PD may be at a high risk of fall due to particular characteristics during the turn. Turning around during locomotive actions may be one of problematic factors causing losing balance. Objects: This study is part of a larger study, which in part aims to identify turning strategies, to compare the strategies in the elderly with and without idiopathic PD aged 51 years and older and to distinguish whether the turning strategies can predict the elderly at risk of falls. Methods: A total of 22 community-dwelling elderlies (10 elderlies with idiopathic PD and 12 healthy elderlies) were investigated for the turning strategies during the timed up and go test. Results: There were some significant differences between the two groups during turning (p<.05). The idiopathic PD group had a tendency of challenging on taking more number of steps, more time to accomplish and staggering more for the turn relative to the control group. Conclusion: Taking more number of steps and more time to turn may be useful for distinguishing the characteristics of PD from that of the healthy elderly in turning strategy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.671-674
• /
• 2004

This paper presents design and analysis of multi-layered ring-dot type piezoelectric transformer. These transformers are useful for step up and step down. The transformers consist of disk type multi-layered piezoelectric ceramic plates. The finite element method(FEM) was used for analysis transformer. Vibration mode, electric field and equivalent elastic strain of piezoelectric transformer were simulated by changing frequency. As results, the strain was distributed in isolation part entirely. We can get the operated in step up transformer when the inner side electrode using by input parts. Also we can get the step down transformers using by input Part as outer side electrode. The step up ratio and step down ratio was increased by decreasing inner side electrode. The resonance frequency was increased by increasing inner side electrode when the transformer was operated in step down transformer. But the step up one was decreased. From these results, we can expect to multi-layered ring-dot type piezo transformers as step up and step down transformers.

• Journal of Ecology and Environment
• /
• v.35 no.2
• /
• pp.141-147
• /
• 2012

The rapid urbanization in developing countries is accelerating both the depletion and fragmentation of urban green space, despite the known positive effects of green spaces on the environmental conditions in cities and the quality of life of residents. Consequently, there is a need for practical tools that can support the development of networks of urban green spaces. This article presents a study that used a GIS-based least cost path (LCP) analysis to identify the best alternative for developing an urban green space network in the coastal city of Jakarta, Indonesia, which was based on the evaluation of topography and land use characteristics. Pair-wise analysis was used to reduce the sensitivity in the LCP model. The results showed that the coastal wetlands in the northern part of Jakarta and the agricultural fields in the suburban areas of Jakarta play an important role in connecting the green space network. On the other hand, some green spaces in the central part of Jakarta could not be connected by the LCP model. The method used in this study can serve as a tool to support the identification of networks of potential urban green spaces. It can also provide useful information for sustainable urban landscape planning and management in urban ecosystems. However, the inclusion of socio-economic criteria would further improve the model.

• Journal of Korea Foundry Society
• /
• v.26 no.5
• /
• pp.211-216
• /
• 2006

The study for thixoextrusion process of 7075, 7003 Al wrought alloys and AZ31 Mg wrought alloy was carried out with respect to reheating rate, isothermal holding temperature and time with an emphasis to the effect of homogenization on thixotropic micro-structures during the partial remelting, especially in the low liquid fraction ($f_L<0.2$). The liquid fraction and average grain size with respect to reheating profile such as reheating rate, isothermal holding temperature and time were almost uniform. It is considered very useful for thixoextrusion in terms of process control such as billet temperature control and actual extrusion time. Micro-structural controls of 7075, 7003 Al wrought alloys and AZ31 Mg wrought alloy before and after homogenization were available and thixotropic microstructures were obtained in both specimens.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.5-13
• /
• 2000

Woosu is the last process in the preparation of the deceased for burial. There are tow hypotheses on the purpose of Woosu. One is that it is to cover hands. The other is that it connects both arms of th body. The pattern of Woosu is 1 cheok 2 chon in length and 5 chon in width. The length is divided intc 3 parts equally with 4 chon. And then, it will be cutted 1 chon both sides of the middle part in Woosu. So, the width of middle part become 3 chon. Regarding the string used in soosu, two applications have been hypothesised . One is that each string is at both sides, the other is that each string ist at 4 edge respectively. Also there are two hypotheses about number of strings in Woosu. One is that total number of Woosu is one. The other is that the total number of Woosu is two. During the period of the Chosun dynasty, it is acknowledged that Sagye Kim, Jang-Saeng insisted that string of woosu is at one by one at both arms and hands respectively to be useful to cover hands of the body. But again the great scholar Tasan Chung, Yak-young pointed out that there are some problems on the explanatory notes and annotations of Sasangrye which ar quoted by Sagye Kim. Jang-Saeng. He insisted that the purpose of Woosu is to connect both arms using one string. Therefore, I will explain the intrinsic nature of Woosu by researching Tasan Chung , Yak-yong's Woosu theory.