• The Journal of the Korean dental association
• /
• v.52 no.3
• /
• pp.153-163
• /
• 2014

3-dimensional information for anatomic stucture plays a role as integral part in clinical aspect of dental practice. CBCT(cone beam computed tomography) has been accepted as useful diagnostic tool offering Volume data and images for evaluating teeth and jaws in lower radiation dose than conventional CT. CBCT equipment is essential for the quality assurance of it to ensure continued satisfactory performance and result of adequate images. Dental practitioner and oral and maxillofacial radiologist should have a responsibility and critical thinking to deliver this technology to patients in a responsible way, so that diaganostic value is maximised and radiation doses kept as low as resonably achievable. CBCT imaging modality should be used only after a review of the patient's health and imaging history and the completion of a thorough clinical examination. Clinical guidelines are systematically developed statements to assist practitioner and patient decisions about appropriate health care for specific clinical circumstances Dental practitioners should prescribe CBCT imaging only when they expect that the diagnostic yield will benefit patient care, enhance patient safety or improve clinical outcomes significantly. Knowledge of patient dose is essential for clinicians who are making the decision regarding the justification of the exposure. There are some limitation in the measurement of patient dose in CBCT for the approval and adaptation of conventinal methodolgy in CT. It is also important to ensure that doses are optimised and in line with any national and international guidelines. The higher radiation doses of CBCT compared with conventional radiography, mean that high standards must be maintained. The Quality Assurance(QA) programme should entail surveys and checks that are performed according to a regular timetable. QA programme should be maintained by staff to ensure adherence to the programme and to raise its importance among staff.

• Journal of Ecology and Environment
• /
• v.38 no.3
• /
• pp.327-334
• /
• 2015

We investigated the current and potential spatial distributions and habitable areas of Biston robustum and Camellia japonica in South Korea in order to provide useful data for the conservation of C. japonica and minimize the damage caused by B. robustum. It was predicted that, by 2070, although B. robustum would be widely distributed throughout the Korean Peninsula, except for the western and eastern coastal areas, it would be narrowly distributed along the Sokcho-si and Goseong-gun coastlines in Gangwon Province. C. japonica is currently located along the southern coastline but its critical habitable area is predicted to gradually disappear by 2070. Assessment of the potential distribution probabilities of B. robustum and C. japonica revealed that the area under the curve (AUC) values were 0.995 and 0.991, respectively, which indicate high precision and applicability of the model. Major factors influencing the potential distribution of B. robustum included precipitation of wettest quarter and annual precipitation (BIO16 and BIO12), whereas annual mean temperature and mean temperature of wettest quarter (BIO1 and BIO8) were important variables for explaining C. japonica distribution. Overlapping areas of B. robustum and C. japonica were $11,782km^2$, $5447km^2$, and $870km^2$ for the current, 2050-predicted, and 2070-predicted conditions, respectively, clearly showing a dramatic decrease in area. Although it is predicted that B. robustum would cause continuous damage to C. japonica in the southern part of the Korean Peninsula, such impacts might diminish over time and become negligible in the future.

• Korean journal of applied entomology
• /
• v.23 no.4 s.61
• /
• pp.215-220
• /
• 1984

Mulberry dwarf, paulownia witches' broom, jujube witches' broom, and sumach witches' broom are known to be associated with mycoplamalike organisms(MLO) in Korea. Simple microscopic detection of MLO infection in these plants was attempted. Periwinkle plant was also tested. Application of $0.2\%\;and\;0.4\%$ solution of Dienes' stain gave diagnoatic value for MLO-induced diseases of periwinkle and mulberry. Among the various plant parts examined, young herbaceous stem just below the apical part gave the best result. Density of staining reaction was proportional to disease severity. Longitudial sections were superior to transverse sections in confirming MLO infection by staining. Light source without blue filter was useful for increasing the color contrast between sieve tube and xylem vessel and for eliminating misinterpretation. Paulownia, jujube, and sumach samples gave no clear difference in staining reaction between healthy and diseased sections even when various modifications of Dienes' staining procedure were tried.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.79.3-80
• /
• 2017

Molecular clouds are the sites of stellar birth. Turbulence is a natural phenomenon in molecular clouds, which largely determines the density and velocity fields. Additionally turbulent energy dissipation can affect the gas kinetic temperature via shocks. Turbulence thus controls the mode and tempo of star formation. However, despite its important role in star formation, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "Mapping turbulent properties of star-forming molecular clouds down to the sonic scale (PI: Jeong-Eun Lee)", we have been mapping two star-forming clouds, the Orion A and the ${\rho}$ Ophiuchus molecular clouds in 3 sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) using the TRAO 14-m telescope. We apply a Principal Component Analysis (PCA), which is an useful tool to represent turbulent power spectrum. We will present the preliminary results of our TRAO KSP toward two regions: OMC 1-4 in the Orion A cloud, and L1688 in the ${\rho}$ Ophiuchus cloud.

• Atmosphere
• /
• v.16 no.4
• /
• pp.359-370
• /
• 2006

Terrain height variance spectra for the Korean mountain region are calculated in order to determine an adequate grid size required to resolve terrain forcing on mesoscale model simulation. One-dimensional spectral analysis is applied to specifically the central-eastern part of the Korean mountain region, where topographical-scale forcing has an important effect on mesoscale atmospheric flow. It is found that the terrain height variance spectra in this mountain region has a wavelength dependence with the power law exponents of 1.5 at the wavelength near 30 km, but this dependence is steeply changed to 2.5 at the wavelength less than 30 km. For the adequate horizontal grid size selection on mesoscale simulation two-dimensional terrain height spectral analysis is also performed. There is no directionality within 50% of spectral energy region, so one-dimensional spectral analysis can be reasonably applied to the Korea Peninsula. According to the spectral analysis of terrain height variance, the finer grid size which is higher than 6 km is required to resolve a 90% of terrain variance in this region. Numerical simulation using WRF (Weather Research and Forecasting Model) was performed to evaluate the effect of different terrain resolution in accordance with the result of spectral analysis. The simulated results were quantitatively compared to observations and there was a significant improvement in the wind prediction across the mountain region as the grid space decreased from 18 km to 2 km. The results will provide useful guidance of grid size selection on mesoscale topographical simulation over the Korean mountain region.

• Atmosphere
• /
• v.23 no.4
• /
• pp.519-526
• /
• 2013

This study aims to analyze the vertical distribution of Asian dust measured by LIDARs at three weather stations in Baengnyeongdo (BND), Munsan (MS), and Gunsan (GS) during 10~11 May 2010, and thereby investigate their effectiveness. Asian dust passed through from central to south-western part of Korea. Although dust particles were detected over the surface in MS and GS, LIDAR data showed that the Asian dust with non-spherical particles was observed in all of the three regions. It seems that the naked-eye observation could not detect dust over the surface of BND due to the temperature inversion below a height of 0.45 km. During the Asian dust events, the duration time of dust presented 9.5 hr (BND), 19.5 hr (MS), and 24.5 hr (GS), respectively with the longest time in GS, whereas dust altitudes ranged from 0.4 to 1.3 km (BND), 0.1 to 2.8 km and 4.1 to 4.2 km (MS), and 0.2 to 2.0 km (GS), respectively, while showing the highest altitude in MS. Aerosol optical thickness (AOT) retrieved by LIDAR and skyradiometer (SR), located close to the LIDAR sites, was compared. MS (LIDAR) and Seoul (SR) attained the AOT of 0.64 and 0.50, and GS (LIDAR) and Gongju (SR) attained the AOT of 0.38 and 0.54, respectively. As SR-derived angstrom exponents (AE) during the time period determined as Asian dust by LIDAR data were 0.17 in Seoul (near MS) and 0.30 in Gongju (near GS), it can be said that the characteristics of dust particles were appeared. During the study period, depolarization ratio could serve as a useful indicator to determine dust aerosol. But, it still seems essential to conduct further investigation with longer period of data to better describe the discrepancy of AOT between LIDARs and SR.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.988-995
• /
• 2015

Gaps between the upper edges of brassiere mold cups and the breasts are one of the most serious issues in realizing comfort wearing of commercial brassieres for small-breasted women. The surplus ease amounts causing the fit problem were measured from 3D wearing images of the small-breasted women's brassieres. The effect after the removing the surplus ease amounts from the upper edge of mold cup was approved by subjective wearing evaluation. Since the volume distribution of mold cup can also affect the wearing sensation of brassiere, the subjective wearing sensation was compared for two brassieres of different volume distributions, V_L, of which volume was concentrated at the lower cup, and V_C, which has the thickest part at the nipple. As the results, the suitable sensation for cup volume and the natural wearing silhouette could be accomplished by removing the surplus ease amounts from the upper edge of mold cup to reduce the gaps between brassieres and the breasts, which could be accomplished through an approach reducing the volume near the upper edge of mold brassiere cup and making the volume concentrated at the lower cup. These works provide a useful information on the design of the brassiere mold cups for small-breasted women. Moreover, modeling methods of 3D scan data and 3D printing technique for making more accurate mold cases used in this research can be helpful to develop and evaluate clothing products in future.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.7-12
• /
• 1999

A new high-resolution rnagnetotelluric (MT) survey was conducted for pull-apart basin analysis (Cretaceous Eumsung Basin), combined with surface sedimentological results. Two cross-basinal MT profiles represent an asymmetric form with a subbasin in the southeastern part. These basinal architectures are well compatible with paleoflow directions and facies transitions of surface sedimentology. The results also suggest that the basin fills reflect pull-apart opening with rapid subsidence of the central blocks. Combined with the surface sedimentological data on asymmetric lithofacies distribution, facies transitions, and paleoflow directions of the alluvio-lacustrine systems, the MT data help explain basin-fill processes during the basin formation. For petroleum exploration and basin analysis, the high-frequency MT technique can be a useful substitute for the costly burden of a seismic-reflection survey on land.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.353-369
• /
• 2017

Flutter is a dangerous phenomenon encountered in flexible structures subjected to aerodynamic forces. This includes aircraft, buildings and bridges. Flutter occurs as a result of interactions between aerodynamic, stiffness, and inertia forces on a structure. In an aircraft, as the speed of the flow increases, there may be a point at which the structural damping is insufficient to damp out the motion which is increasing due to aerodynamic energy being added to the structure. This vibration can cause structural failure, and therefore considering flutter characteristics is an essential part of designing an aircraft. Scientists and engineers studied flutter and developed theories and mathematical tools to analyze the phenomenon. Strip theory aerodynamics, beam structural models, unsteady lifting surface methods (e.g., Doublet-Lattice) and finite element models expanded analysis capabilities. Periodic Structures have been in the focus of research for their useful characteristics and ability to attenuate vibration in frequency bands called "stop-bands". A periodic structure consists of cells which differ in material or geometry. As vibration waves travel along the structure and face the cell boundaries, some waves pass and some are reflected back, which may cause destructive interference with the succeeding waves. This may reduce the vibration level of the structure, and hence improve its dynamic performance. In this paper, for the first time, we analyze the flutter characteristics of a wing with a periodic change in its sandwich construction. The new technique preserves the external geometry of the wing structure and depends on changing the material of the sandwich core. The periodic analysis and the vibration response characteristics of the model are investigated using a finite element model for the wing. Previous studies investigating the dynamic bending response of a periodic sandwich beam in the absence of flow have shown promising results.

• Advances in Traditional Medicine
• /
• v.1 no.1
• /
• pp.55-63
• /
• 2000

Soeumin Sibjeundaibo-tang (SJDBT) and Soyangin Sibimijihwang-tang (SMJHT) have been used traditionally to improve the systemic blood circulation and biological energy production in the patients with circulatory and neuronal diseases. The object of this study is to determine the protective effects of SJDBT and SMJHT extracts on the spontaneous and glutamate-induced neuronal damages in cultured cells derived from mice cerebral cortex. At 14 days after beginning the cultures, the activity of lactate dehydrogenase released into the culture media was significantly decreased by treatment of cerebroneuronal cells with SJDBT and SMJHT (0.1 mg/ml) for 7 days. By comparison with the normal cells, cerebroneuronal morphology was dramatically changed by treatment of glutamate (1 mM) for 12 hrs, and this was conspicuously recovered by pretreatment of cerebroneural cells with SJDBT and SMJHT (0.1-1.0 mg/ml) for 2 days. Moreover, glutamated-induced DNA fragmentation was also protected by pretreatment of cerebroneuronal cells with those extracts. These results suggest that naturally occurring and glutamate-induced degeneration of cultured cerebrocortical cells may be related, in part, to the process of apoptotic cell death. The pharmacological properties of SJDBT and SMJHT extracts to improve cerebroneuronal degeneration may be considered as one of useful medicines that can prevent cerebrocortical impairments resulted from age-dependent and excitotoxicity-induced neuronal degeneration in human brain.