• Cross-Cultural Studies
• /
• v.25
• /
• pp.549-596
• /
• 2011

This paper aims to introduce some useful multimedia freewares, and also support Chinese instructor with discussing how to operate them for instructional design of multimedia language learning class. For this aims, this paper consists of three parts: First, instructional design. This part is focused to what kind of instructional model to be based on, for example, Dick & Carey model, ADDIE model, ASSURE model etc. This part introduces these models, and modifies ADDIE and ASSURE model to D.D.A.I.E.S and S.S.A.U.R.E.S as 'A(nalysis)' in these model may apply to the next 'D(evelopment)' on ADDIE, 'S(elect Methods, Media and Materials)' on ASSURE in the practical Chinese class. Second, Programme: What to use. This part is focused to what kind of free software we can use. In the web site online, there are huge free softwares so we usually hesitate to select and also don't know how to operate even though selected one of them. This part, accordingly, introduces ten of useful freewares and compares each other in terms of usefulness for Chinese instructors. Third, Programme: How to use. It is of no use just to know what to use but not to know how to operate, so this part describes how to use freewares like a kind of manual in detail as far as possible. In conclusion, we hope more Chinese instructors to learn and use more useful freewares for designing the better multimedia Chinese class by this paper.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.290-293
• /
• 2000

Knowledge discovery refers to the overall process of discovering useful knowledge from data. The linear programming model is a special form of useful knowledge that is embedded in a database. Since formulating models from scratch requires knowledge-intensive efforts, knowledge-based formulation support systems have been proposed in the DSS area. However, they rely on the strict assumption that sufficient domain knowledge should already be captured as a specific knowledge representation form. Hence, the purpose of this paper is to propose a methodology that finds useful knowledge on building linear programming models from a database. The methodology consists of two parts. The first part is to find s first-cut model based on a data dictionary. To do so, we applied the GPS algorithm. The second part is to discover a second-cut model by applying neural network technique. An illustrative example is described to show the feasibility of the proposed methodology.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.34-37
• /
• 1996

The expanding method of tube to tubesheet joint part on neclear steam generators are classified into three classes of roller expanding, explosive expanding and hydraulic expanding. After the expanded Mock-Up specimen are made by the three expanding method. The general properties, microstructure/microvickers hardness, pull-out strength, hydraulic leak pressure, of tube to tubesheet joint part were inspected. and We evaluated the operation efficiency of expansion, reproduction of expanded joint about three expanding method. Through the overall evaluation of tube to tubesheet joint part, The hydraukic expanding and explosive expanding could be certificated more useful expanding method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.775-783
• /
• 1990

In this paper we implemented the fast thinning unit by modifying the pipeline architecture which was proposed by Stanley R. Sternberg. The unit is useful in preprocessing such as image representation and pattern recognition etc. This unit is composed of interface part, local memory part, address generation part, thinning processing part and control part. In thinning processing part, we shortened the thinning part which performed by means of look up table using window mapping table. Thus we improved the weakness of SAP, in which the number of delay pipeline and window pipeline are equal to image column size. Two independent memorys using tri-state buffer enable the two direction flow of address generated by address generation part. This unit avoids the complexity of architecture and has flexibility of image size by means of simple modification of logic bits.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.658-663
• /
• 1994

The classification and coding of part for group technology applications continus to be labour intensive and time-consuming process, and therefore much effort is dedicated to the structure and creation of automatic coding systems. IN this paper, Neural networks is used to generate processes-related digit as well as part geometry-related digit of the TS code where part name is provided as input.since part name, which is appropriately designated, provides much information about part geometry and manufacturing processes. THe developed GT recommendation system is integrated with interactive TS coding system and database in order to handle the changes of production environment, such as the change of production part of plant. It is found to recommend codes accurately and promises to be a useful tool for consistent, reliable and convenient coding processes.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.399-406
• /
• 2001

This study describes the geometric characteristic and the 5-axis machining method of end mill body with insert tip. The geometry of end mill body is consisted of the flute part and the insert tip part. Thus, this study defines the flute part as ruled surface with constant helix angle and the insert tip part as rectangular plane on general direction. The geometric algorithm and the 5-axis NC part program were calculated by our programmed software and a sampled end mill body was machined on 5-axis machining center equipped with two index tables. The machined end mill body with insert tip was very agreeable to the designed end mill body with insert tip. Thus, the method proposed in this study may be very useful for the machining of end mill body with insert tip.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.3
• /
• pp.91-107
• /
• 2000

The linear programming model is a special form of useful knowledge that is embedded in a database. Since formulating models from scratch requires knowledge-intensive efforts, knowledge-based formulation support systems have been proposed in the Decision Support Systems area. However, they rely on the assumption that sufficient domain knowledge should already be captured as a specific knowledge representation form. Hence, the purpose of this paper is to propose a methodology that finds useful knowledge on building linear programming models from a database. The methodology consists of two parts. The first part is to find s first-cut model based on a data dictionary. To do so, we applied the General Problem Solver(GPS) algorithm. The second part is to discover a second-cut model by applying neural network technique. An illustrative example is described to show the feasibility of the proposed methodology.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.5 no.1
• /
• pp.135-139
• /
• 2004

Objectives : The objectives of this report is to introduce PTA. Methods : The examination of the leg length inequality gives us a useful tool for diagnosis of body imbalance. especially pelvic distortion. There are four steps in the process of the leg analysis, according to "The Standard Manual of Chuna Society (2nd ed., Seoul:KCA Press. 2001)". In the last step of the analysis, knee-flexing over $90^{\circ}$, we have often experienced a specific sign that the lower legs are attracted toward one side spontaneously. The authors call it 'Lower Leg Lateral Attraction'. This is a very significant sign that gives us which is the major part between pelvis and the upper parts over sacrum. Thus it is definded as "Pelvic Twist Analysis, PTA" by the authors. With PTA, first, you must check the side of short leg and next, check the side of lateral attraction in lower leg over-flexing. If both sides coincide with each other, then the major part you can correct first is pelvic distortion. If not, you must find another part for primary correction, instead of pelvis. Conclusions : PTA becomes a useful complement to the examination of the leg length inequality.

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.11-18
• /
• 2001

The purpose of this study is to survey women′s poor breast shapes depending on their ages and breast types, and thereupon, analyze the differences and correlations among them, and thereby, provide for some basic data useful to the development of the comfortable brassiere which can serve to correct the poor breast. 1. As a result of categorizing the types of schematic breast sides, "type 1" was characterized by medium lower part, greatest pro trusion of breast itself, volumed upper part and visible breast outside, while "type 2" be characterized by medium lower part, most flatness, poor upper part, smallest outside size and medium outside, and "type 3" was characterized by least poor lower part, medium protrusion of breast, poor upper part, medium outside size , and "type 4" was characterized by poorest lower part, medium protrusion of breast, poor upper part, medium outside size and poorest outside. 2. The breast locations could be categorized depending on brest side types; "type 1" a higher location of breast than the other types, "type 2"had a lower location of breast except for the nipples thant the other types, "type 3" had the lowest location of breast and "type 4" had a comparatively low location of breast but had the highest nipples.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.1-9
• /
• 2002

This study describes the geometric characteristics and the 5-axis machining method in order to make end mill cutter coming with insert tips. End mill geometry is consisted of flute part and insert tip part. Flute part modeled by using ruled surfaces with constant helix angle, and insert tip part modeled by rectangular planes containing tapped hole of specified direction in its center. In this study, the modeled insert tip part considered both of a radial rake angle and a axial rake angle, because they were important cutting conditions. In order to machining the virtual end mill defined from geometric characteristics, we programmed a special software to machining the end mill considered in this study. This software can generate NC-codes about following processes, end milling or ball end milling of flute part end milling of rectangular plane, centering of hole, drilling of hole, and tapping of hole. Ant sampled end mills were modeled and machined on 5-axis CNC machining center with two index tables. Since machined end mills were very agreeable to designed end mills, we saw that the method proposed in this study can be very useful for manufacturing of end mill body with insert tip.