• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.15-34
• /
• 2004

Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.

• Journal of the Korean housing association
• /
• v.10 no.2
• /
• pp.155-163
• /
• 1999

The purpose of this study was to investigate the residents' actual usage at three rest areas and three playgrounds in an apartment complex. This study was conducted with field study in J apartment complex in Incheon from August 14 to August 30, 1998. According to the results of the study, there were more users in playgrounds than in the rest areas. The rest area near the place for the elderly in the complex was used mainly by the elderly females. The playground located near the main entrance of the complex was frequently used because it is the biggest one in size and has an enough space for playing. Furthermore, the condition of shading areas by trees and buildings influenced the rate of use of the residents. Therefore, to increase the usage rate of rest areas and playgrounds, they should be located near to the places which have community amenities and should have accessible entrance for residents. Landscape design of the apartment complex should be done with the plot plan of the complex simultaneously. Moreover, the number and the kinds of trees to be planted in the apartment complex should be considered carefully.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.576-580
• /
• 2003

In order to assess the spectrum usage efficiency in mobile radio services, we consider the capacity limits of a CDMA system. The maximum achievable capacity per $km^2$ is viewed as a meaningful figure of merit for a cellular system and a method is proposed here to estimate the minimum achievable distance between adjacent base stations in the case of CDMA. The probability for entering in soft handover state is used as a limit for densification in a CDMA system. From this criterion, conditions on the minimum possible cell radius are derived.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.370-375
• /
• 2008

A lot of nursing facility expansions are needed by rapidly growing elder population and operating long-term nursing act for the elderly from July, 2008. To supply facilities in a short period, government is considering a method which is converting usage of existed building to nursing facility. Therefore, we took actual state analysis by interviewing manager, surveying actual measurement and using draft among the converted facilities. To improve and encourage those living environments of nursing facilities, we need to establish design standard of adaptable facility.

• Journal of Korean Foot and Ankle Society
• /
• v.23 no.4
• /
• pp.196-200
• /
• 2019

Symmetrical Digital Gangrene (SDG) is characterized by the sudden onset of peripheral, symmetrical gangrene in the absence of any major vascular occlusive disease. Catecholamine inotropes are frequently used for the treatment of septic shock combined with an unstable hemodynamic state, and their usage can rarely induce SDG. There is no standard treatment for the SDG. Early recognition and prompt management of sepsis and expeditious process of weaning off of the inotropes are necessary to prevent progression of SDG. To the best of our knowledge, this is the first report in Korea regarding the treatment of SDG induced by catecholamine inotropes.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.761-768
• /
• 2010

Research from many marketing fields shows that the importance of factors which ultimately reflect customers' satisfaction towards a product or service vary with the progression of time. Likewise, the emotions that users experience from using the product can vary with prolonged interaction with the product itself. Thus, research was conducted under the notion that users' emotions at the initial stage of product usage is likely to vary with that at a later stage, when users would have had more experience with the product. In this research, a comparison was made between the emotions felt by customers with first-hand experience with the iPhone and those felt by long-time iPhone users who already had much more opportunities to familiarize themselves with the product. The results of the research conducted above show that, with first usage of the iPhone, users experience a relatively low level of negative emotions(Uncomfortableness) due to the predominance of the users' positive emotions. Over prolonged usage, however, the level of negative emotions associated with the usage of the iPhone has been shown to increase. Still, it is impossible to state that the Uncomfortableness associated with iPhone usage is high in general. In fact, it has been shown that positive emotions were rather experienced by iPhone users both before and after usage, suggesting that the emotions involved during iPhone usage was generally positive. Although more research would need to be conducted to safeguard this claim, it can be generally deduced from the results of this research that:when using a product, positive emotions in terms of the reflective level accounts for much of the negative emotions(i.e. discomfort) associated with behavioral level with regard to the product itself.

• Korean Journal of Environment and Ecology
• /
• v.20 no.1
• /
• pp.9-19
• /
• 2006

This study was conducted on the visitors regarding their usage and evaluation state of the interpretive media which is utilized as a self-guide environment interpretation for the purpose of accumulating basic data for the park management. A questionnaire survey was chosen and the 275 valid samples among them were analyzed. The socioeconomic and behavioral characteristics of the visitors turned out to be similar with the results from another visitor survey in the same site. Among those who used the interpretive media, the largest proportion(77%) used the information board resources of the park; the usage rate of interpretive labels of woody plants, interpretive signs of cultural assets, and LED signs were shown to be relatively high. The usage of park brochures, park web sites, visitor center exhibits, and bulletin boards were less than 40% each. Visitors were asked to evaluate the importance and performance of the nine interpretive medias using a Likert Scale whose value ranges from one to five. The result recorded averaged above 4, which proved that the respondents were perceiving the importance of all forms of interpretive media greatly. The performance of interpretive media was also evaluated as affirmative, except the visitor center exhibits.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.60-66
• /
• 2024

Host's data during transmission. Data tempering results in loss of host's sensitive information, which includes number of VM, storage availability, and other information. In the distributed cloud environment, each server (computing server (CS)) configured with Local Resource Monitors (LRMs) which runs independently and performs Virtual Machine (VM) migrations to nearby servers. Approaches like predictive VM migration [21] [22] by each server considering nearby server's CPU usage, roatative decision making capacity [21] among the servers in distributed cloud environment has been proposed. This approaches usage underlying server's computing power for predicting own server's future resource utilization and nearby server's resource usage computation. It results in running VM and its running application to remain in waiting state for computing power. In order to reduce this, a decentralized decision making hybrid model for VM migration need to be proposed where servers in decentralized cloud receives, future resource usage by analytical computing system and takes decision for migrating VM to its neighbor servers. Host's in the decentralized cloud shares, their detail with peer servers after fixed interval, this results in chance to tempering messages that would be exchanged in between HC and CH. At the same time, it reduces chance of over utilization of peer servers, caused due to compromised host. This paper discusses, an roatative decisive (RD) approach for VM migration among peer computing servers (CS) in decentralized cloud environment, preserving confidentiality and integrity of the host's data. Experimental result shows that, the proposed predictive VM migration approach reduces extra VM migration caused due over utilization of identified servers and reduces number of active servers in greater extent, and ensures confidentiality and integrity of peer host's data.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.267-273
• /
• 2020

This Hydrokinetic energy system is the process of extracting energy from rivers, canals and others sources to generate small scale electrical energy for decentralized usage. This study investigates the application of Soil and Water Assessment Tool (SWAT) in Geographical Information System (GIS) environment to evaluate the theoretical hydrokinetic energy potentials of selected Rivers (Asa, Awun and Oyun) all in Asa watershed, Kwara state, Nigeria. SWAT was interfaced with an open source GIS system to predict the flow and other hydrological parameters of the sub-basins. The model was calibrated and validated using observed stream flow data. Calibrated flow results were used in conjunction with other parameters to compute the theoretical hydrokinetic energy potentials of the Rivers. Results showed a good correlation between the observed flow and the simulated flow, indicated by ash Sutcliffe Efficiency (NSE) and R² of 0.76 and 0.85, respectively for calibration period, and NSE and R² of 0.70 and 0.74, respectively for the validation period. Also, it was observed that highest potential of 154.82 MW was obtained along River Awun while the lowest potential of 41.63 MW was obtained along River Asa. The energy potentials obtained could be harnessed and deployed to the communities around the watershed for their energy needs.

• International Journal of High-Rise Buildings
• /
• v.11 no.2
• /
• pp.115-124
• /
• 2022

Welding is a significant part of the construction industry. Since most high-rise building construction structures rely on a robust metal frame welded together, welding defect can damage welded structures and is critical to safety and quality. Despite its importance and heavy usage in construction, the labor shortage of welders has been a continuous challenge to the construction industry. To deal with the labor shortage, the ultimate goal of this study is to design and develop an automated robotic welding system composed of a welding machine, unmanned ground vehicle (UGV), robotic arm, and visual sensors. This paper proposes and focuses on automated weaving using the robotic arm. For automated welding operation, a microcontroller is used to control the switch and is added to a welding torch by physically modifying the hardware. Varying weave patterns are mathematically programmed. The automated weaving is tested using a brush pen and a ballpoint pen to clearly see the patterns and detect any changes in vertical forces by the arm during weaving. The results show that the weave patterns have sufficiently high consistency and precision to be used in the actual welding. Lastly, actual welding was performed, and the results are presented.