• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.850-857
• /
• 2012

A moving network is the usage model that provides the mobile stations to the communication service via the mobile relay deployed in the high-speed vehicle. The mobile relay periodically performs the signal strength measurement of the neighbor base stations to select the target base station during the handover procedure. The mobile stations experience the service disruption during the measurement of the mobile relay. In this paper, we propose the estimation based scanning method to overcome the service disruption of the mobile stations connected via the mobile relay. In the proposed method, mobile stations subordinated in the mobile relay periodically measure the signal strength of neighbor base stations in order to perform handover. The measured signal strength is used to estimate the signal strength between the mobile relay and the neighbor base station. We performed simulations in order to evaluate the performance of the proposed method in terms of the estimation accuracy and the overhead due to the exchange of channel information. By the simulation result, The estimation error is less than 4dBm when more than 6 mobile stations are used for the estimation. The overhead caused by the proposed method is less than that caused by the direct measurement of the mobile relay when the data rate is more than 8Mbps.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.11-18
• /
• 2011

The increasing of web users load to the excessive transmission traffic and system overload problems. To solve these problems, cluster systems are studied. In conventional cluster systems, when the request size is large owing to such types as multimedia and CGI, the particular server load and response time tend to increase even if the overall loads are distributed evenly. In this paper, we consider the methodology of efficient resource usage, specially distributed web cluster system. We develope an algorithm that distributes the load on the web cluster system to use the system resources, such as system memory equally. The response time is chosen as a performance measure on the various clustering models. And based on the concurrent user to the web cluster system, the response time is also examined as the number of users increases. Simulation experience with this algorithm shows that the response time and average throughput seems to have a good results compare to those with the other algorithm.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.331-341
• /
• 2014

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.103-111
• /
• 2011

This study parent-children relationship with the youth of the Internet was to evaluate the impact on. Internet excess utility of adolescents was to influence the, and how we received its relation the influence. This study distinguished their patent-children relation according to the violence and non-interference level and Internet excess utility contains an everyday life problem, we can not do the work to plan, the excess Internet usage, and the complications of the another person. This distinguished with genernal, potent risk, high risk category. The result was as follows: First, potent risk and high risk category appeared in the parent-children relation to be the no- interference. This means that parent-children relation has an influence on internet excess utility of adolescent. Second, the role of parents is important to reduce internet utility of adolescent, and it must understand so that the development stage is careful. We need the supply for adolescent with play and experience program development which can enjoy the leisure culture. We need internet poisoning expert training and the treatment must be achieved with the counselling to be continuous to problem adolescents.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.13-23
• /
• 2016

The purpose of this study is to examine the perceptions and attitudes of pre-service early childhood education teachers about the introduction and utilization of smart education. We selected 262 pre-service early childhood education teachers. The Focus Group Interview and questionnaire were used to measure the perceptions and attitudes about the introduction and utilization of smart education. As a result, most of pre-service early childhood education teachers use smart phones and they use extra two more hours except phone calls. The most frequent usage is text. It is affected to device utilization experience in class, impact on childhood development. FGI results of pre-service early childhood education teachers for the introduction and utilization of smart education were analyzed by 2 subjects, 4 categories, 18 items.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1996.10a
• /
• pp.5-26
• /
• 1996

This study has two research objectives related to end-user computing (EUC) . One of the research objectives was to investigate the current status of EUC of Korean firms. Another research objective was to examine the relationship between individual difference of end-users and EUC success. Using survey data from 752 end-users of 23 firms, the surrent status of EUC and the relationship between individualdifferences of end-users and EUC success were investigated. The current status of EUC was examined from six perspectives : 1) what is the characteristics of EC strategy of Korean firms , 2) what are the individual characteristics of end-users in Korean firms, 3) what are the characteristics of tasks performed by end-users using computer 4) what are the application a areas of EUC 5) How end-users are satisfied with the support of firms, 6) what are system usage and satisfaction of end-users. It was also found that individual differences of endf-users are related to EUC success.More specifically , it was shown that the male gender, younger age, higher level of education , higher ran아 and organizational tenure, higher math ability , thinking type of cognitive style, positive and optimistic attitudes toward computer, more experience with computer, more computer education and knowledge are individual differences variables associated with EUC success. The results of stepwise regression analysis suggested that the individuaal difference variables accounted for 14%, 25% 39% and 30% of the variances of four EUC success variables, satisfaction for outcome , satisfaction for ability , frequency of computer use, and thenuber of tasks, respectively. These empirical findings suggest that EUC managers should consider individual differences of end-users in managing EUC , such as education, training, support, and human resource management , to maximize potential benefits of EUC.

• Journal of Gastric Cancer
• /
• v.4 no.2
• /
• pp.121-125
• /
• 2004

Purpose: Esophagojejunal anastomotic complications after a total gastrectomy include leakage, stenosis, bleeding, and abscess formation. Especially, the mortality rate for esophagojejunal anastomotic leakage is $80\%$. Although these complications hare been reduced by the usage of the EEA stapler, they are still serious and depend on various factors: the surgeon's experience, the stage of disease, the extent of surgical intervention, the method of operation, and the patient. Some local factors, such as vascularization of the graft, traction on the anastomosis suture line, and local infections, have been implicated as contributing to these complications. Materials and Methods: During the period $1995\∼2003$, of the 850 gastrectomies for gastric carcinomas, 171 were intra-abdominal total gastrectomies. All of these 171 operations were performed by one surgeon using a routine D2 lymph-node dissection and a 25-mm EEA stapler on an antecolic end-to-side esophagojejunostomy. In the 77 cases a seromuscular reinforced suture at the esophagojejunostomy site was performed, and in 94 cases, a whole layer reinforced suture with absorbible materials was used. We evaluated the incidence of complications according to age, sex, stage of patients, and combined resection. Also, we compared the incidences of complications for seromuscular and whole layer reinforced sutures. Results: The complications are major leaks ($2.9\%$), minor leaks ($3.5\%$), stenosis, bleeding ($1.8\%$), and abscess formation formation ($1.8\%$). In the five cases of major leaks, there were four mortalities with operative methods. The other patients with stenosis, bleeding, and abscess formation were treated conservatively with success. The incidences of complications were not related with age, sex, stages, and combined resection. The incidences of complications for the whole layer reinforced suture group ($2.9\%$) were less than those for the seromuscular reinforced group ($8.8\%$, P=0.04). Conclusion: The most serious complication of esophagojejunal anastomosis is major leakage with an $80\%$ mortality. The other complications are stenosis, bleeding, and abscess formation, for which no mortalities occurred during this study. Whole layer suture of the esophagojejunal anastomotic site is an important method for preventing leakage.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.731-746
• /
• 1997

The usage of object models for the development of software has been frowung due to the prevalence of the ob-ject oriented paradigm.The object moedels produced as results of requirments analysis and design activities are vety veneficial to the implementation phase.It is even possible for source code to be genrated automatically if object models are concrete enough.Therefore system analyzers and desingners should make an dffort to refine theabstrace ogject model defined at.an early stage in order to achieve a more conrete object model.In general,re-fining an abstrace object model into a concrete model depends too much on the desigver's infromal experience.In this paper,we persent the refinement techniques required for concreting an abstract object model bassed on OMT(Object Modeling Technique)'s notation,We will discuss the definition of the abstraction level of an object model and the transformational rules of refinement.These transformational rules are currently applied to the design of a software tool,named Process Modeler,which is a major component of the software development process modeling system for ICS(Information Communication Service). Finally we can achieve a concrete object model which can easily be translated into C++ source code.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.423-430
• /
• 2013

The development of information technology introduced digital contents and Social Network Services(SNS), and allowed the virtual transaction and communication between users called "the experience knowledge" advanced from "the objective knowledge." This paper will analyze interactive storytelling system creating different types of stories on narrative genre about family history, personal history and so on. Through analysis on narrative interviews, direct observations, documentations and visual records, contents about CEO story, corporate story, family story and especially family history will be categorized into sampleDB and informationDB. Accumulated contents will allow the user to increase the value and usage of the contents through interactive storytelling system by restructuring the contents on family history. This research has developed writing tool data model using different digital contents such as texts, images and pictures to encourage open communications between first generations and third generations in Korea. Furthermore, researched about connected system on interactive storytelling creation device using various genre of family story that has been data based.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.116-128
• /
• 2020

In this study, we introduce a multi-modal mixed reality (MR) application for advertising the main touristic landmarks on Jeju Island, and evaluate its effectiveness based on the Technology Acceptance Model (TAM) with a focus on the user's involvement in Korean culture (K-Culture). Specifically, we deployed several stimuli to enable users to retrieve information, visualize a variety of heritage content such as text, images, videos, virtual artifacts, and immerse in a VR environment to experience the heritage locations. The results of the online survey with 436 participants showed that for consumers with low K-Culture involvement, Perceived Usefulness and Perceived Ease-of-Use did not affect their Intention to Visit the island. Still, it had a significant impact on their Intention to Use the application. On the other hand, for the group with high K-Culture involvement, Perceived Usefulness had no effect on the Intention to Use and Intention to Visit. However, Perceived Ease-of-Use had a significant impact on their Intention to Use the application and Intention to Visit Jeju Island. Therefore, when user involvement in K-Culture is high, convenience of use has played a significant role in sensory media usage and the intention to visit, regardless of the usefulness of the mixed reality content. In contrast, users with low K-Culture involvement primarily focused on the functional aspects of the application. These findings open the path for follow-up studies on K-Culture involvement and immersive media tourism marketing, which will benefit digital tourism marketing and Korea's tourism industry.