• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.85-86
• /
• 2006

A theoretical model is applied to the analysis of thermomechanical properties of $Al-SiC_p$ FGMs in this study. Functionally graded $Al-SiC_p$ composites ($Al-SiC_p$ FGMs) consisted with 10 layers gradually changing volume fractions of Al and $SiC_p$ were fabricated using the pressureless infiltration technique. $Al-SiC_p$ FGMs plates of total thickness of 3mm, 5mm and 7mm with fairly uniform distribution and compositional gradient of $SiC_p$ reinforcement in the Al matrix throughout the thickness was successfully fabricated. The curvature of $Al-SiC_p$ FGM plates was measured to check the internal stress distribution predicted via a theoretical model for the analysis of thermo-mechanical deformation. The evolution of curvature and also internal stresses in response to temperature variations could be predicted for the different combinations of geometric thickness of FGM plates. Theoretical prediction of thermally induced stress distribution makes it possible to design FGM structures without any critical failure during the usage of them.

• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.342-354
• /
• 2012

This study aimed at acknowledging characteristics of space usage and suggesting orientation of space planning and furniture designing that meet various residents' demands correlating with residential area, furniture and family members by doing fact finding of volume of the furniture in medium/small sized apartment. The contents of the study are "experience of functional remodeling," "a number of bedrooms correlating with a number of family" and "furniture arrangement of each space and characteristics of space utilization" based on forty six cases. Followings are results of the study. 1) It was acknowledged that the function of space relating to family members largely depends on furniture arrangement correlating with age of children. It is needed that flexible planning of residential area to meets growing children and various family demands. 2) Functional remodeling requires furniture rearrangement attended with the remodeling. Thus, it is required that ideas in more simple and efficient furniture designing and consideration of construction environment embracing that ideas. 3) It can be acknowledged that the most demanding matter to enjoy satisfied and comfortable life in residential area is the matter of storage area. It is also understandable that the matter can be worse by time going by and the change of living pattern. Therefore, it is required that the consideration of enough storage area compatible with its function of the room and the planning of built-in furniture for storage.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.217-226
• /
• 2006

Intensive studies have been made in the area of N-VOD server Multimedia files in the N-VOD sever are characterized with the large volume of data, the requirements of synchronization and real-time playback of streams. The basic goal of the study is to find an efficient mechanism to allow maximum number of users under the limited resources such as Buffer size and disk bandwidth. we propose a efficient VCR-LIKE operations and buffer, disk scheduling policy for multimedia services with management of VOD sever resources. Simulation results show that the rate of buffer usage and service time of proposed scheme are about 18% performance improved than that of traditional methods. This implies that our method can allow much more users for given resources.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.379-390
• /
• 2005

Intensive studies have been made in the area of VOD server Multimedia files in the VOD sever are characterized with the large volume of data, the requirements of synchronization and real-time playback of streams. The basic goal of the study is to find an efficient mechanism to allow maximum number of users under the limited resources such as Buffer size and disk bandwidth. we propose a efficient $pre\_fetching$ policy for multimedia services with dynamic monitoring and management of VOD sever resources. Simulation results show that the rate of buffer usage and service time of proposed scheme are about $28\%$ performance improved than that of traditional methods. This implies that our method can allow much more users for given resources.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.814-826
• /
• 2015

The most important advantage of nanoparticles is the increased thermal conductivity coefficient and convection heat transfer coefficient so that, as a result of using a 1.5% volume concentration of nanoparticles, the thermal conductivity coefficient would increase by about twice. In this paper, the effects of a nanofluid ($TiO_2$/water) on heat transfer characteristics such as the thermal conductivity coefficient, heat transfer coefficient, fuel clad, and fuel center temperatures in a VVER-1000 nuclear reactor are investigated. To this end, the cell equivalent of a fuel rod and its surrounding coolant fluid were obtained in the hexagonal fuel assembly of a VVER-1000 reactor. Then, a fuel rod was simulated in the hot channel using Computational Fluid Dynamics (CFD) simulation codes and thermohydraulic calculations (maximum fuel temperature, fluid outlet, Minimum Departure from Nucleate Boiling Ratio (MDNBR), etc.) were performed and compared with a VVER-1000 reactor without nanoparticles. One of the most important results of the analysis was that heat transfer and the thermal conductivity coefficient increased, and usage of the nanofluid reduced MDNBR.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.9-20
• /
• 2008

Since plutonium accounts for 40-50% of the power produced by uranium fuels, spent fuel contains only residual plutonium. Management of this plutonium is one of the aspects influencing the choice of a fuel cycle back-end option: reprocessing, direct disposal or wait-and-see. Different grades and qualities of plutonium exist depending from their specific generation conditions; all are valuable fissile material. Safeguard authorities watch the inventories of civil plutonium, but access to those data is restricted. Independent evaluations have led to an estimated current inventory of 220t plutonium in total (spent fuel, separated civil plutonium and military plutonium). If used as MOX fuel, it would be sufficient to feed all the PWRs and BWRs worldwide during 7 years or to deploy a FBR park corresponding to 150% of today' s installed nuclear capacity worldwide, which could then be exploited for centuries with the current stockpile of depleted and spent uranium. The energy potential of plutonium deteriorates with storage time of spent fuel and of separated plutonium, due to the decay of $^{241}Pu$, the best fissile isotope, into americium, a neutron absorber. The loss of fissile value of plutonium is more pronounced for usage in LWRs than in FBR. However, keeping the current plutonium inventory for an expected future deployment of FBRs is counterproductive. Recycling plutonium reduce the required volume for final disposal in an underground repository and the cost of final disposal. However, the benefits of utilizing an energy resource and of reducing final disposal liabilities are not the only aspects that determine the choice of a back-end policy.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.89-96
• /
• 2018

The purpose of this study is to categorize Commercial area by identifying characteristics of blocks and coding them in order to segment use zoning in Commercial area. The study was conducted as follows. Data from building register, cadastral map, statistics annual report are utilized to identify the physical environment of the block. four types used as code under the physical environment classification code which are classification code of physical environment, detail usage, volume ratio, and height type are set, and combine the classification codes sorted by the four types of code. Through the physical environment classification codes, there are currently 37 different block characteristics of the Old downtown Commercial area. Diversity is not reflected. There are only Central commercial area of regulations in Old downtown commercial areas that are uniformly managed. For the renewal, management and development that can occur in the near future, it is necessary to segment of use district in the commercial area. Consider the current situation and future development direction for the management of sustainable commercial areas. Management is required using physical environment classification codes. It is meaningful that it can be maintained, managed and developed in accordance with the characteristics of each block.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8_spc
• /
• pp.1244-1255
• /
• 2019

Dairy goat production continues to be a socially, economically and culturally important part of the livestock industry in North, Central and South America and the Caribbean islands. Goat milk, cheese and other dairy products offer consumers food products with nutritional, health and environmental benefits. In North America, Mexico produces the greatest volume of goat milk, but most is for family or local consumption that is typical of a mixed farming system adopted by subsistence farmers in dry areas. The United States is not yet a large global goat milk producer, but the sector has expanded rapidly, with dairy goat numbers doubling between 1997 and 2012. The number of dairy goats has also increased dramatically in Canada. Commercial farms are increasingly important, driven by rising demand for good quality and locally sourced goat cheese. In South America, Brazil has the most developed dairy goat industry that includes government assistance to small-scale producers and low-income households. As of 2017, FAO identified Haiti, Peru, Jamaica, and Bolivia as having important goat milk production in the Western Hemisphere. For subsistence goat producers in the Americas on marginal land without prior history of chemical usage, organic dairy goat production can be a viable alternative for income generation, with sufficient transportation, sanitation and marketing initiatives. Production efficiency, greenhouse gas emission, waste disposal, and animal welfare are important challenges for dairy goat producers in the Americas.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.16-25
• /
• 2020

The operation of a wastewater treatment plant (WWTP) is a complex task which requires to consider several aspects: adapting to always changing influent composition and volume, ensuring treated effluents quality complies with local regulations, ensuring dissolved oxygen levels in biological reaction tanks are sufficient to avoid anoxic conditions etc. all of it while minimizing usage of chemicals and power consumption. The traditional way of managing WWTPs consists in having employees on the field measure various parameters and make decisions based on their judgment and experience which holds various concerns such as the low frequency of data, errors in measurement and difficulty to analyze historical data to propose optimal solutions. In the case of activated sludge WWTPs, parts of the treatment process can be automated and controlled in order to satisfy various control objectives. The models developed by the International Water Association (IWA) have been extensively used worldwide in order to design and assess the performance of various control strategies. In this work, we propose to review most recent WWTP automation initiatives around the world and identify most currently used control parameters and control architectures. We then suggest a framework to select WWTP model, control parameters and control scheme in order to develop and benchmark control strategies for WWTP automation.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.437-454
• /
• 2021

This study investgates Korean water technology through the water market perspective and analyses its competitiveness. Based on the water technology classification, water technology competitiveness is analysed through the technological influence index and market dominance index which are based on the extracted water technology patents from the US, Europe, Korea, and Japan for the last decade. As a result, the Korean water technology patents were lack in influence and competitiveness in global market considering the large volume of patents. There are two most tech-influential industries in Korea; manufacturing industry consisting pipes, sterilization, disinfection, and advanced water purification equipment, and construction industry including seawater desalination and water resource development. Due to the domestic usage of the patents, the Korean water technology patents scored low in global market PFS(Patent Family Size) index compared to their CPP(Cites Per Patent) index. The study is meaningful in a way that the analysis on Korean water technology competitiveness using water technology classification system and patent analysis was conducted based on the perspective of the global water market.