• 제목/요약/키워드: Urgent problems

검색결과 409건 처리시간 0.028초

고령화 사회진입에 따른 고령자 창업의 필요성에 관한 연구

  • 박경주;김기학
    • 한국벤처창업학회:학술대회논문집
    • /
    • 한국벤처창업학회 2006년 춘계학술발표회
    • /
    • pp.241-261
    • /
    • 2006
  • In this study, distribution of population with economic activities in ingress step to advanced-age society, the current status for the economic activities of old people and the necessity of economic activities through employment and inauguration for old people were investigated. The current status for the economic activities of old people and the changes of economic activities since IMF were also reviewed, and the activation of senior club in regional society and establishment of old man power bank were proposed. The speed of ingress to advanced-age society in Korea is so fast compared with other developed countries that the participation in economic activities of old people is urgent for international competitiveness and their economic independence. Up to now, due to the related regulations and institutional inertia, the practical support of employment and inauguration has not been achieved, but, the practical support should be achieved by solving the problems regarding the regulations and institution.

  • PDF

변압기 소음에 의한 변전소 소음예측 및 저소음 변압기 현장적용 (The Audible Noise Prediction of the Substation due to Transformer Audible Noise and the Field Application of the Low Noise Transformer)

  • 권동진;구교선;김경탁;우정욱
    • 전기학회논문지
    • /
    • 제59권8호
    • /
    • pp.1382-1387
    • /
    • 2010
  • Recently, there has been a growing interest in the environmental conservation. Accordingly, problems related to the audible noise of transformers have became more frequent. Therefore, it is urgent to find a fundamental solution about the audible noises in the substations. This paper described a sort of fundamental solution to solve the noise problem. As a fundamental solution, we suggested the proper audible noise level of transformers through noise prediction in the substation construction phase. And we applied the low noise transformers which have the predicted noise level. As the result, we are able to satisfy the noise regulation through measuring 43.6dBA at the boundary of substation. It is confirmed that the average error rate of prediction was within 3 percent.

Novel Tools and Techniques of Today and Tomorrow: For Studying Catalysis and Energy Problems

  • Hussain, Zahid
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.127-127
    • /
    • 2013
  • The quest for renewable energy requires us to understand, predict, and ultimately control matter and energy at the electronic, atomic, and molecular levels. The ever-increasing demand to diversify the energy portfolio and to minimize environmental impact while supplying global energy needs, has intensified the urgency for developing alternative energy sources and carriers. Significant research efforts are under way and will continue in a broad range of materials synthesis, use-inspired and fundamental science with the use of light sources such as synchrotron and free electron lasers. Energy-related materials research faces urgent challenges today. We need to go beyond the Edisonian hit and trial approach to more systematic research with the use of advanced tools applicable under realistic in-situ and in-operando conditions capable of exploring electronic and atomic structure of catalysts and energy relevant materials. Through various scientific examples, I will explain the current state-of-the art and future directions in the aforementioned areas of research.

  • PDF

조선 조립블록 운영관리에 관한 사례연구 (A Case Study on Assembly Block Operations Management at Shipyard)

  • 박창규;서준용
    • 경영과학
    • /
    • 제23권2호
    • /
    • pp.175-185
    • /
    • 2006
  • How to efficiently manage assembly blocks at shipyard has been a hot management issue in the shipbuilding Industry, because it has significantly influenced on the productivity of shipbuilding process. This paper introduces the real practice of assembly block operations management in Hyundai Heavy Industries (HHI) and the Ship Assembly Block Operations Optimization (SABOO) project that h3s been launched in HHI as an academy-and-industry collaborative project, aimed to diagnose problems, propose possible solutions, and develop a prototype system in order to search ways of improving the assembly block operations management. Through the field interviews, observations, and benchmarking studies, the SABOO project diagnosed the most rudimental and urgent problem and proposed possible solutions. In addition, the SABOO project developed the prototype system that embodied the visual function of monitoring the shipyard on a real-time and the Interactive block assignment function that utilized the assembly block assignment algorithm developed by the project. As a whole, the SABOO project tested the possibility and gained an insight in extending the functions of block transportation/stockyard management system.

벨트식 유회수기의 유회수율 데이터의 무차원화 과정에 관한 연구 (A Study on the Nondimensional Analysis for the Recovery Rate of Oil Using a Belt Type Skimmer)

  • 윤경환
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제2권1호
    • /
    • pp.34-39
    • /
    • 1999
  • Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices by adhesion method is known to be closely related with the problem of estimating the thickness of film remaining on the surface of solid withdrawn from a quiescent liquid. In the present study a series of experimental results are compared with the analytic estimation for the thickness of film remaining on the solid surface using non-dimensional analysis. For the case of pure water both results show the remarkable agreement. However, discrepancy has been found for the case of Bunker C oil and diesel oil. The analytic estimation over-predicts the experimental value for the case of Bunker C oil and under-predicts it for the case of diesel oil. Further study is required to investigate the real situation including a contact angle and the property difference between oil and water.

  • PDF

작업재해 예방을 위한 직접활선 작업방법 개선방안에 관한 연구 (A study on the improvement of rubber glove work to prevent the work accident)

  • 문수덕;이정관
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 A
    • /
    • pp.492-494
    • /
    • 2000
  • The rapid increase of electric power demand and the strong requirements for interuptiom-free made most distribution works being done by interruptiom-free work techniques. These trends lead to increase of accident by electric shock. It goes to prove that more than 80% of electric accident is due to the hot line works. Therefore, the countermeasures are very urgent. This paper suggests the improvement to prevent the work accident by interruption-free work through the examination of the present situation of interruption-free work techniques as well as analysing the problems in terms of live-line works and working procedures. These improvement will contribute to reduce the work accident in live-line work and enhance the construction quality by training and managing workers effectively.

  • PDF

서울 지하철의 운임제도 개선방안 (The Improved Device of Seoul Subway Fare System)

  • 이태식;전영준;권오철;정종기;이동욱
    • 한국철도학회논문집
    • /
    • 제9권2호
    • /
    • pp.200-205
    • /
    • 2006
  • Subway widely used as a major mean of public transportation both at home and abroad contributes to ease chronic traffic congestion in cities. However, subway operating expense is expected to increase continuously because subway requires vast amount of money at the construction stage, huge sum of maintenance cost is spent during operation, and passenger needs for more convenient facilities is increasing. on the contrary to enormous operating expenses, fare that is occupying most of operating income doesn't come up to its prime cost causing chronic operating deficit. It is urgent to prepare fare system improvement measures to increase operating income in order to resolve financial difficulty of a subway operating organization. Therefore, the current study analyzed present condition and problems of subway fare system, and suggested improvement measures such as improvement of fare adjustment procedure, improvement of free-ride system, diversification of ticket, etc.

해양산업교육(海洋產業敎育)의 진흥방안(振興方案) (Promoting Measures for Korean Marine Industry Education)

  • 박영호
    • 수산해양교육연구
    • /
    • 제3권1호
    • /
    • pp.1-8
    • /
    • 1991
  • A rapid increase in population is most likely to become a menace to human existence, and will cause unfavorable effects. Therefore, we must consider it as an urgent task to make use of marine resources in various ways. Korea particularly laks potential resources, so has no other way but to exploit and utilize the resources for its overall economic growth. In therms of these viewpoints. this report studies the constructive measures and programme for promoting Korean marine industry education after reassessing the aspects of marine industry and analyzing the present situation and problems of the Korean science and technology today. Under these circumstances. it is suggested that financial and administrative support be afforded by government and the authorities concerned for the reformation of curriculum and educational system, inverstment growth for improving educational environments and research conditions. In addition, administrators and teachers are expected to exert their utmost efforts to bring ahout encouraging results in the marine industry education.

  • PDF

농촌지역 산업진흥을 위한 새로운 발전전략의 모색 (A Study on the New Developmental Ststegies for Promotion of Rural Economy)

  • 이동필
    • 농촌계획
    • /
    • 제1권1호
    • /
    • pp.111-124
    • /
    • 1995
  • This paper discuss on the strategies for rural economic development Maul purposes of this paper are as follow: First, to review importance of economic promotion in the integrated rural developmental scheme, Second, to identify structural problems of rural economy, and Third, to suggest promotional strategies for the development of rural economy. Economic vitalization is the very important strategy to support daily life of rural population. Since rural economy heavily depends on agricultural sector which has relatively low productivities, diversification of rural economy through introduction of 2nd and 3rd industrial sector is one of the most urgent tasks in rural Korea. Integrated, localized, and planning oriented approaches with reformation of incentive system for the development of rural economy are strongly recommended as new strategies.

  • PDF

리소그라피 장비 마스크 홀더부의 경량화를 위한 최적 설계

  • 정준영;이우영;강흥석
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
    • /
    • pp.139-143
    • /
    • 2007
  • The need for technological developments of lithography equipment is urgent for the stable production in response to the rapid growth of the recent display industry. As an example, the products currently in the market face alteration problems resulting from excessive weight of the mask holder part. This is one of obstacle for the automation of the equipment. In response, the mask holder part problem has been minimized through FEM and design of experiments in order to optimize the situation with minimized Deflection and reduced mass for satisfactory replacement of the mask holder part.

  • PDF