• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.436-441
• /
• 2009

An air filter is a device to remove dust from the air supplied to the automotive engine. A requirement for the optimum air filter is to improve the capability to remove particles from the air it takes in, that is the efficiency and amount of dust collection. By removing dust from the air, the air filter prevents the engine cylinder from wear, reduces ventilation resistance, and thus improves engine output and guarantees intake performance. In order to guarantee such air filter performance, it is very important to properly seal the air filter. For passenger cars made in Korea, the air filters are fabricated with steel caps as their frames are large and their engine capacity is big. Recently however, European countries and Japan started using urethane for manufacturing the air filter, so that all foreign-made cars now have urethane filters. The urethanes used for air filters are applied in two ways: One is to use soft urethane for both top and bottom of the air filter and the other is to use soft urethane for the top and hard urethane for the bottom. Each of these method has unique problems. In this study, hard urethane is used for both top and bottom of the filter in order to improve those problems and increase the sealing efficiency. Especially for the top, NBR (rubber mold) is pre-settled in tough urethane and then the urethane is solidified through foaming, which makes it possible to develop a solid and double-sealed filter.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.69-75
• /
• 2023

최근 자기복원(self-recovery) 코팅층을 가진 자동차용 도장면 보호필름의 적용이 증대되고 있다. 본 연구에서는 poly(urea-urethane) hybrid 자기복원 코팅층을 가진 poly(vinyl chloride) 기재 보호필름에 대한 기본 물성에 대한 평가 결과를 보고한다. Poly(urea-urethane) 기반 코팅층을 구성하고 있는 주요 화합물의 비율과 코팅층의 두께 변화에 따른 자기복원성능을 확인하였으며, 색차 값 측정을 통해 내오염성능을 정량화 하였다. 또한, 소수성 첨가제로 외부 오염에 대한 표면특성을 향상시키기 위하여, 소량의 실리콘계 반응형 첨가제를 코팅 조성물에 함량에 따른 easy-cleaning 효과와 접촉각을 확인하였다. 마지막으로, poly(urea-urethane) 자기복원 코팅층을 가진 보호필름의 장기간 사용에 따른 변색 및 변형에 대한 가능성을 확인하고자 촉진 내후성 평가를 진행하였다.

• 산업경영시스템학회지
• /
• 제19권38호
• /
• pp.105-115
• /
• 1996

According to the manual of shoemaking, the urethane adhesive for dress shoe applicable to the cementing process in KS G 3116 has been steadily developed. The evaluation test result of urethane adhesive, which is a mathematical model of men's shoe on shoemaking, is presented. Also, the quality test result of urethane adhesive, which is a list of experiment for field application and a model of assembling component in each unit process is introduced.

• 보존과학회지
• /
• 제27권1호
• /
• pp.115-121
• /
• 2011

석조 문화재의 복원을 위하여 우레탄 복원제를 제조하였다. 제조된 우레탄 복원제는 그간 석조 문화재 복원용 재료로 주로 사용해 왔던 에폭시계 복원제 정도의 강한 접착 강도와 인장 강도를 나타내고 있으며, 충진성, 수축성, 도색성 등의 물성 역시 에폭시계 복원제와 유사하게 제조되었다. 특히, 이 우레탄 복원제는 그간 가장 큰 문제점으로 대두되었던 에폭시계 복원제의 황변 현상과 비가역성 문제를 해결함으로서, 석조문화재의 복원의 항구성과 지속적인 안정성을 부여할 수 있을 것으로 보인다. 또 본 복원제를 메움제와 접착제로 직접 적용하여 사용하였으며, 이를 재 용해하여 복원에 사용된 우레탄을 제거할 수 있어 본 복원제의 가역성을 나타내었다. 이 복원제는 작업 환경에 따라 복원자가 가사 시간을 조정할 수 있도록 제조되어 사용의 편리성 또한 증진시켰다. 또 이 복원제는 강한 접착력과 인장 강도를 가지고 있어 석조문화재 이외의 도자기나 금속 문화재 등의 다양한 문화재의 메움제나 접착제로 사용이 가능할 것으로도 사료된다.

• 한국건설관리학회논문집
• /
• 제6권3호
• /
• pp.128-134
• /
• 2005

방수공사의 중요성에 의해 그간 다양한 방수 재료 및 공법이 개발되었고 옥상바닥 방수공법으로 현재 합성고분자의 신장성, 탄성, 내구성 등이 뛰어날 폴리우레탄 도막방수재가 많이 보편화되어 성능이 높아지면서 시장점유율도 급증하게 되었다. 이에 방수성은 향상되었지만 이것 또한 방수결함이 빈번히 발생되고 있어 하자발생률이 감소되지는 않고 있는 실정이다. 이러한 측면에서 본 연구는 옥상방수에 있어서 폴리우레탄 도박방수를 중심으로 방수결함 유형 및 하자원인을 분석함으로써 향후 하자 재발방지를 위한 기초 자료로 활용하고자 한다. 순천지역을 대상으로 한 13개 현장 조사 결과 바탕의 평면불량으로 인한 물고임 현상이 $25\%$로 가장 많이 나타났고, 바탕의 건조불량으로 인한 부풀음 박리 현상이 $15\%$ 순으로 나타났으며 들뜸 $14\%$, 파단 $11\%$, 기타 순으로 결함이 발생되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1042-1047
• /
• 2004

Urethane is a high polymeric and elastic material useful in designing mechanic parts that cannot be molded in rubber or plastic material. Especially, urethane is high in mechanical strength and anti-abrasive. Hereby, an urethane coated aluminum wheel is used for supporting of OHT vehicle moving back and forth to transport products. For the sake of verifying the safety of the vehicle, structural safety for applied maximum dynamic load on a urethane wheel needs to be carefully examined while driving. Therefore, we have performed the dynamic simulation on the OHT vehicle model. Although the area definition of applied load can be obtained from the previous study of Hertzian and Non-Hertzian contact force model when having exact properties of contact material, static analysis is simulated, since the proper material properties of urethane have not been guaranteed, after we have performed the actual contact area test for each load. In case of this study, the method of distributing load for each node is included. Finally, in comparison with result of analysis and load-displacement curve obtained from the compression test, we have defined the material properties of urethane. In the analysis, we have verified the safety of the wheel. After all, we have performed a mode analysis using the obtained material properties. With the result, we have the reliable finite element model.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.114-120
• /
• 2005

Urethane is a high polymeric and elastic material useful in designing mechanic parts that cannot be molded with rubber or plastic material. In particular, urethane is high in mechanical strength and anti-abrasive. Hereby, a urethane coated aluminum wheel is used to support of the OHT vehicle moving back and forth to transport products. For the sake of verifying the safety of the vehicle, structural safety fur applied maximum dynamic load on a urethane wheel must be examined carefully while driving. Therefore, we performed a dynamic simulation on the OHT vehicle model and we determined the driving load. The area definition of applied load may be obtained from the previous study of Hertzian and Non-Hertzian contact force model having exact properties of contact material. But the static analysis is simulated after we have performed the actual contact area test for each load since the proper material properties of urethane have not been guaranteed. In this study, the method of distributing loads for each node is included. Finally, in coMParison with the results of analysis and load-displacement curve obtained from the compression test, we have defined the material properties of urethane. In the analysis, we verified the safety of the wheel. Finally, we performed a mode analysis using the obtained material properties. With these results, we presented a reliable finite element model.

• Rapid Communication in Photoscience
• /
• 제2권1호
• /
• pp.24-27
• /
• 2013

A polymeric photobase generator containing oxime-urethane groups is applied to a fluorescence micropatterning material. Polymer bearing oxime-urethane groups was prepared by copolymerization of methyl methacrylate with methacryloyloxyethyl benzophenoneoxime urethane (MBU). The reaction of amino groups in the irradiated copolymer film with dansyl chloride (Dns-Cl) was monitored by using UV absorption, IR absorption and fluorescence spectroscopy. The fluorescence spectrum of the Dns-Cl-treated irradiated copolymer film shows a strong fluorescence with a fluorescence maximum wavelength at 510 nm. A blue fluorescent micropattern with a line width of $2{\sim}3{\mu}m$ was obtained. Treatment of the irradiated copolymer film with Dns-Cl and rhodamine B mixture led to the formation of green, red, and orange-colored fluorescence micropatterns. Thus, various colored micropatterns on a single polymer film can be obtained by selective excitation of each dye molecules.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.399-409
• /
• 2007

Characteristics of polyaniline anti-corrosive coatings with various primer coating resins(epoxy resin, urethane resin, and others) and top coating resins(epoxy and acrylic urethane resins) were investigated through adhesion, acid resistance, alkaline resistance, water resistance, and anti-corrosion tests. As a result, the anti-corrosive properties of the prepared coatings using polyaniline varied with the types of primer and top coating resins. In this condition, the properties of adhesion, chemical resistance, and water resistance were found to be very satisfactory when using emeraldine base (EB) of polyaniline blended with single-packaged urethane and acrylic urethane resins as the primer coatings, and using acrylic urethane resin as the top coatings. Also, the anti-corrosive function of these anti-corrosive coatings was well preserved for 1000 hr in the salt spray experiment.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.23-26
• /
• 1999

Urethane block copolymers, containing soft segments such as polydimethylsiloxane (PDMS), polytertramethylene glycol(PTMG) and PEO-PPO-PEO (Poloxamer) block copolymer, were synthesized and examined for th vapor- phase separation of toluene from nitrogen stream by using vapor permeation equipment. Generally permeabilities of PTMG and PDMS based urethane membranes were higher than those of Poloxamer based urethane membranes. Organic vapor permeability in the PDMS and PTMG soft segment urethane membranes were greater than those measured in the Poloxamer films, due to more polymer swelling. The membranes performed best with toluene, with toluene/dry N2 seletivities ranging from 120~200 and permeablilities as high as 23$\times$10-9 mol/m2sPa for saturated toluene feeds at 23$^{\circ}C$.