• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.232-245
• /
• 2017

In this study, the high-resolution numerical simulation results considering landuse characteristics are analyzed by using single layer Urban Canopy Model (UCM) in Weather Research Forecast (WRF). For this, the impact of urban parameters such as roughness length and anthropogenic heat in UCM is analyzed. These values are adjusted to Seoul metropolitan area in Korea. The results of assessment are verified against observation from surface and flux tower. Forecast system equipped with UCM shows an overall improvement in the simulations of meteorological parameters, especially temperature at 2 m, surface sensible and latent heat flux. Major contribution of UCM is appreciably found in urban area rather than non-urban. The non-urban area is indirectly affected. In simulated latent heat flux, applying UCM is possible to simulate the change similarly with observations on urban area. Anthropogenic heat employed in UCM shows the most realistic results in terms of temperature and surface heat flux, indicating thermodynamic treatment of UCM could enhance the skills of high resolution forecast model in urban and non-urban area.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.986-993
• /
• 2010

Spatially distributed on-site devices such as bioretentions and bioboxfilters are becoming more common as a means of controlling urban stormwater quality. One approach to modeling the cumulative catchment-scale effects of such devices is to resolve the catchment down to the scale of a land parcel or finer, and then to model each device separately. The focus of this study is to propose a semi-distributed model for simulating urban stormwater quantity and identifying best sites for spatially distributed on-site stormwater control devices in an urban drainage system. A detailed model for urban stormwater improvement conceptualization simulation is set up for a $0.9342km^2$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.416-425
• /
• 2011

To analyze the physical processes of sea-breeze development over a coastal urban area, numerical simulation for seabreeze (SB) and its frontogenesis was examined based on urbanized MM5 (uMM5) with urban canopy parameterization. On 6 August 2006, SB and its front were well developed in Busan under a weak offshore flow. As a result of wind vector, ZVB (Zero Velocity Boundary), potential temperature obtained the uMM5, at 0900 LST, SB advanced below 200 m height in the coastal areas and the internal boundary grew with the urban coastal region. At noon, the height of the SB head with updraft was approximately one and a half times (~600 m) higher than its depth in central urban. Applying the frontogenesis function, the SB structure for frontogenesis and frontolysis were complicated spatially; the dynamic effects of wind (i.e. convergence and tilting term) could play an important role in the growth of SB, especially the convergence effect.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.357-371
• /
• 2016

Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.2
• /
• pp.55-64
• /
• 2008

This study aims to analyze the sensitivity of WSM(weighted scenario method)-AHP method according to variation of nonlinear exponent for accessibility criteria, which are used to make urbanization potential maps with the optimal weighting value for multiple criteria in grid-based GIS technique. Besides this study tried to develop WSM-AHP2 which is simplified by using rank of the potential value for each scenario. The two methods were applied to the test area, Suwon city located south area of Seoul, with time series land-use maps of 1986 and 1996. The evaluation system of urbanization potential have 7 criteria including 6 accessibility criteria. The results of WSM-AHP2, the optimal weighting values and their corresponding potential maps, have almost similar with those of WSM-AHP. In the application of CA(cellular automata) model for expansion of urbanized area using the three potential maps by WSM-AHP, WSM-AHP2, and specialists's AHP evaluation, it also showed that the accuracy of simulation for actual urban area is the highest in the potential map of WSM-AHP, followed by WSM-AHP2 and specialists's AHP evaluation. From the results of this study, WSM-AHP and simplified WSM-AHP2 will be used to generate the optimal potential maps for land-use planning in urban fringe area.

• Journal of Environmental Impact Assessment
• /
• v.17 no.4
• /
• pp.213-224
• /
• 2008

Since 1970's rapid urbanization and economic growth, the population was highly increased and residential type was changed from single detached house to high density and high-rise apartment. Recently more high-rise residential building generates more traffic volumes and it makes spatial concentration. The highly traffic volumed road and high residential building was constructed nearby, it occurs noise problem. The purpose of this study is comparing the performance of three type noise barrier between noise source and receiver using a noise map simulation. Three types were composed as road side planting trees, building side planting trees and noise barrier wall. Planting trees is less effective than noise barrier wall as a noise barrier. And they are all effective under 3 stories than over 5 stories, especially noise barrier function can't work over 5 stories.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.43-57
• /
• 2003

This paper presents the air corridor planning strategy based on simulation with MUKLMO_3 (Micro-scale Urban Climate Model) to investigate the wind field and air corridor caused by the land-use change of the New Town Development Area in Pan-Gyo. In the first part, the most frequently observed wind field in the New Town Development Area was measured and used as an initial value to simulate a more realistic wind field and air corridor. Several experiments with different initial values of wind fields were carried out to investigate the wind field change affected by the New Town Development. The results show the features of the wind field of the neutral stability condition in the urban canopy layer with a high resolution near the ground. The wind speed is weakened at this level due to the New Town Development. It was found that the wind field and air corridor are influenced by the land-use change. After the development of the New Town, the speed of the wind field decreased and the main wind directions and air corridor changed. In this study, this model is found to be a useful tool for evaluating air corridor and change of wind field in speed and direction.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.682-686
• /
• 2005

Recently some urban areas have been flooded due to heavy storm rainfalls. Though major causes of these floodings may be attributed to localized heavy rainfalls, other factors are related to urban flooding including deficiency of storm sewer network capacity, change of surface runoff due to covered open channels, and operational problems of storm drainage pump stations. In this study, hydrologic and hydraulic analysis of Sutak basin in Guri city were carried out to evaluate flooding problems occurred during the heavy storm in July, 2001. ArcView, a world most widely used GIS tool, was used to extract required data for the hydrologic analysis including basin characteristics data, concentration times, channel routing data, land use data, soil distribution data and SCS runoff curve number generation from digital maps. HEC-HMS, a GIS-based runoff simulation model, was successfully used to simulate the flood inflow hydrograph to Sutak pumping station.

• Computers and Concrete
• /
• v.19 no.4
• /
• pp.387-394
• /
• 2017

To study the effects of water-cement ratio changes and cracks on chloride ion transmission rate in cracked concrete, RCM method was adopted to accelerate the diffusion of chloride ion in cracked concrete, and the changes in chloride ion concentration and around the cracks are inferred by finite-element method. The test results show that as far as prefabricated cracks on concrete components are concerned, the width thresholds of two cracks on the concrete specimens with a water-cement ratio of 0.5 and 0.6 are 0.05 mm and 0.1 mm respectively, the width threshold of two cracks on the concrete specimens with a water-cement ratio of 0.4 is 0.05 mm and 0.2 mm respectively; and the results of numerical simulation show that the smaller the water-cement ratio is, the more significant effects of cracks on chloride ion transmission rate are. As a result, more attention shall be paid to the crack prevention, repairing and strengthening for high-strength concrete.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.7-13
• /
• 2011

The climate change due to the increased consumption with fossil fuel and rise of the oil price have been serious global issues. Automobile industry consumes 30% of the oil every year and causes air pollution and global warming by the exhaust emissions and carbon dioxide ($CO_2$). The demand of two-wheeled vehicle increases every year due to the parking and traffic problem caused by the increased automobiles in the urban area. Approximately 50,000,000 two-wheeled vehicles were produced in 2008. The development and sales of the hybrid two-wheeled vehicle industry become active due to its increased market demands. In this paper, the change of the motor and battery efficiency, driving distance, hill climbing ability with the change of the motor capacity was analyzed. Simulation of the peculiarities in urban driving schedule(World-wide Motorcycle Test Cycle(WMTC), Manhattan driving schedule), constant speed(10 km/h, 35 km/h) of small electronic two-wheeled vehicle was also carried out. Through the simulation result, appropriate capacities of the motor and battery for urban driving was acquired.