• Land and Housing Review
• /
• v.13 no.1
• /
• pp.113-129
• /
• 2022

A building's eco-friendliness is directly related to various values including the life cycle cost of a building. However, the conventional architectural design method has a limitation in that it cannot create an optimized case according to the surrounding environmental conditions. Therefore, the purpose of this research is to present a design assistance tool that can review planning cases optimized for the environmental conditions of the building site in the planning stage of architectural production. To achieve the purpose of the study, an algorithm for realizing 3D modeling of the region and analysis of the solar environment was produced based on the site contours, building, and road information from the digital topographic map provided by the National Geographic Information Institute. To examine the validity of the developed algorithm, a comparative experiment was conducted targeting the elevation direction of the existing building. As a result, it was found that the optimal elevation direction selected by the algorithm can receive higher insolation compared to the front facade of the main building.

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.113-131
• /
• 2022

A rockburst is a common disaster in deep-tunnel excavation engineering, especially for high-geostress areas. An anomalously low friction effect is one of the most important inducements of rockbursts. To elucidate the correlation between an anomalously low friction effect and a rockburst, we establish a two-dimensional prediction model that considers the discontinuous structure of a rock mass. The degree of freedom of the rotation angle is introduced, thus the motion equations of the blocks under the influence of a transient disturbing force are acquired according to the interactions of the blocks. Based on the two-dimensional discontinuous block model of deep rock mass, a rockburst prediction model is established, and the initiation process of ultra-low friction rockburst is analyzed. In addition, the intensity of a rockburst, including the location, depth, area, and velocity of ejection fragments, can be determined quantitatively using the proposed prediction model. Then, through a specific example, the effects of geomechanical parameters such as the different principal stress ratios, the material properties, a dip of principal stress on the occurrence form and range of rockburst are analyzed. The results indicate that under dynamic disturbance, stress variation on the structural surface in a deep rock mass may directly give rise to a rockburst. The formation of rockburst is characterized by three stages: the appearance of cracks that result from the tension or compression failure of the deformation block, the transformation of strain energy of rock blocks to kinetic energy, and the ejection of some of the free blocks from the surrounding rock mass. Finally, the two-dimensional rockburst prediction model is applied to the construction drainage tunnel project of Jinping II hydropower station. Through the comparison with the field measured rockburst data and UDEC simulation results, it shows that the model in this paper is in good agreement with the actual working conditions, which verifies the accuracy of the model in this paper.

• Steel and Composite Structures
• /
• v.42 no.2
• /
• pp.277-288
• /
• 2022

A novel flat steel plate-concrete-corrugated steel plate (FS-C-CS) sandwich panel was proposed for resisting impact load. The failure mode, impact force and displacement response of the FS-C-CS panel under impact loading were studied via drop-weight impact tests. The combined global flexure and local indentation deformation mode of the FS-C-CS panel was observed, and three stages of impact process were identified. Moreover, the effects of corrugated plate height and steel plate thickness on the impact responses of the FS-C-CS panels were quantitatively analysed, and the impact resistant performance of the FS-C-CS panel was found to be generally improved on increasing corrugated plate height and thickness in terms of smaller deformation as well as larger impact force and post-peak mean force. The Finite Element (FE) model of the FS-C-CS panel under impact loading was established to predict its dynamic response and further reveal its failure mode and impact energy dissipation mechanism. The numerical results indicated that the concrete core and corrugated steel plate dissipated the majority of impact energy. In addition, employing end plates and high strength bolts as shear connectors could prevent the slip between steel plates and concrete core and assure the full composite action of the FS-C-CS panel.

• International Journal of High-Rise Buildings
• /
• v.10 no.4
• /
• pp.311-321
• /
• 2021

Perception of the public to structural fires is very important because there are only a number of tall timber buildings constructed in the world. People are hesitating to accept tall timber buildings, so it is essential to ensure the first generation of tall timber buildings to a very high standard, especially fire safety. Right now, there are no specific design standards or regulations for fire design of tall timber buildings in Europe. Even though heavy timber members have better fire resistance than steel components, many conditions still need to be verified before considering the use of timber materials, e.g. fire spread, post-fire collapse, etc. This research numerically explores the structural behaviours of a tall Glulam building when one of its internal Glulam (Glued laminated timber) columns fails after sustaining a full 120-min standard fire and is removed from the established finite element building model created in SAP2000. The numerical results demonstrate that the failure and removal of the selected internal Glulam column may lead to the local failure of the adjacent CLT (Cross laminated timber) floor slabs, but will not lead to large disproportionate damage and collapse of the whole building. Here, the building is assumed to be located in Glasgow, Scotland, UK.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.45-52
• /
• 2022

In the field of UAM, which is attracting attention as a next-generation transportation system, technology developments for using UAVs have been actively conducted in recent years. Since UAVs adopted with these technologies are mainly operated in urban areas, it is imperative that accidents are prevented. However, it is not easy to predict the abnormal flight state of an UAV causing a crash, because of its strong non-linearity. In this paper, we propose a method for predicting a flight state of an UAV, based on a CNN-LSTM hybrid model. To predict flight state variables at a specific point in the future, the proposed model combines the CNN model extracting temporal and spatial features between flight data, with the LSTM model extracting a short and long-term temporal dependence of the extracted features. Simulation results show that the proposed method has better performance than the prediction methods, which are based on the existing artificial neural network model.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1135-1145
• /
• 2022

Due to increase in concerns related to the climate change, state-wide promotion of the carbon neutrality has been in progress thus far. Smart City could be one of the measures as the initiative to mitigate the missions process. The primary purpose of Smart City can be summarized to be maximization of the social net-beneift to be returned for the local citizens and derivation of the optimal pattern of the energy consumption could belong to one of the elements included in the net-benefit. Currently, the energy consumption by the buildings has been determined to be responsible for the greatest consumption among the sectors considered to be energy-intensive. Moreover, considering the fact that the consumption by operations of HVAC is responsible for nearly 40% in the commercial buildings, it is virtually not possible to optimize schedules for the energy consumption with considerable deliverables from the perspective of the urban planners. Thus, the methods to implement the optimal schedules for the HVAC commissioned with the OHUs were concluded to be the suitable candidate resources for the simulation by EnergyPlus capable of monitoring the thermal changes in each subject space in the present research.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.30-38
• /
• 2022

As of 2020, 1,564 roundabouts have been installed and operated to prevent major traffic accidents and promote safe and smooth passage over the past 10 years. According to the Korea Transportation Research Institute, the number of accidents decreased by an average of 43.8% per year, fatal accidents by 50%, and serious injuries by 48.1%, confirming the safety effect. However, most intersections with high pedestrian traffic, such as children's protection areas near elementary schools, operate signal intersections. Therefore, in this study, a simulation was performed through the VISSM program to conduct a study on the pedestrian-centered roundabout installation method. This study was conducted to ensure that pedestrians can have the right of way safely by installing and operating traffic lights at crosswalks on roundabouts located in urban areas or child protection zones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.88-88
• /
• 2023

지난 100년 동안 전 지구의 기상 이변이 꾸준히 증가하고 있다. 기후 변화는 도시 홍수 피해에 큰 영향을 끼치는데 급속한 도시화와 이상 기후로 인한 돌발 강우 패턴의 증가는 도시 침수의 취약성을 가중시킨다. 또한 급격한 도시 발전으로 인한 도심지의 불투수율 또한 꾸준히 증가하였다. 특히 2022년 8월 8일에 강남역과 도림천 일대에 내린 기록적인 강우는 기후 변화를 실감하게 하는 사회적 이슈가 되었으며 도심지 미래 수방 대책 변화를 상기시키는 계기가 되었다. 이로 인한 재해 피해에 최소화하기 위해 미래 기후 변화를 고려한 도심지의 새로운 방재 목표강우량 설정이 필요하다. 하지만 전 지구 모형(GCM)의 기후 변화 시나리오는 일 단위(Daily) 상세화 자료를 보편적으로 사용하고 있다. 하지만 이는 단기 강우 자료를 필요로 하는 도시 홍수 모의에서 제대로 활용할 수 없는 한계를 가지고 있다. 따라서 본 연구는 2019년에 발간된 IPCC 6차 평가 보고서(AR6)가 제안하는 SSP(Shared Socioeconomic Pathways, 공통사회경제경로) 시나리오를 기반하여 상세화된 일 단위(Daily) 강우 데이터를 비모수적 통계 기법을 사용하여 시간 단위(Hourly)로 상세화하였다. 또한 지속 시간별 연 최대치 강우를 추출하여 빈도 해석을 통해 도시 유역의 미래 확률 강우량을 제시하였으며, 서울시 상습적인 침수 취약 지역인 도림천 유역에 강우-유출 모형(XP-SWMM)을 사용하여 미래전망 기후 자료인 SSP2-4.5와 SSP5-8.5에 따른 미래 확률 강우 침수 모의를 실시하였다. 본 연구의 결과는 최신 기후 변화 시나리오를 고려한 서울시 방재 성능 목표 강우량 산정에 활용 가능할 것으로 사료되며 미래 강우량 침수 모의를 통해 침수 취약 구역인 도림천 일대 홍수피해의 근거 자료가 되는 것에 의의를 둔다. 또한 치수 분야에서 기후 변화를 고려하기 위해서는 기후 변화 시나리오에 따른 시간 단위 자료의 상세화가 필요함을 시사한다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2008

The control and prediction of surface settlement, gradient and ground displacement are the main factors in shallow tunnel design and construction in urban area. For deformation analysis of shallow tunnel due to excavation it is important to identify possible deformation mechanism of shear bands developing from tunnel shoulder to the ground surface. This paper investigaties quantitatively the deformation behavior of shallow tunneling by model tunnel test and strain softening analysis Incorporating the reduction of shear stiffness and strength parameters. The comparison of model tunnel test result and numerical simulation using strain softening analysis showed good agreement in crown settlement, normalized subsidence settlement and developing shear bands above tunnel shoulder. In this study, it is blown that the strain softening modeling is applicable to the nonlinear deformation analysis of shallow tunnel.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.241-263
• /
• 2022

The conventional wind and twisted-wind effect on aerodynamic properties of neighboring buildings arranged in side-by-side and tandem systems at 2B and 5B spacings are systematically investigated by large eddy simulation. Different physical interactions between different wind profiles and neighboring buildings will be deeply understood. The neighboring-building system under two different types of wind profiles, i.e., conventional wind profile (CWP), twisted wind profiles (TWP) with the maximum twisted angle of 30°, is used to evaluate the variation of physical mechanism between wind and buildings. Aerodynamic characteristics including mean and RMS pressure coefficient, and velocity field were systematically analyzed and compared between different scenario. It was found that the distribution of mean pressure, root-mean-square x velocity and the streamline of wind flow for TWP greatly deviated from CWP, and the effect of TWP on the downstream building, was drastically different from that of CWP, such as the size of vortexes after the lower stream building being bigger when exposed to TWP, and the mean pressure distribution on the building surfaces are also different. Moreover, evidence of buildings arranged in side-by-side and tandem configurations having interchangeable properties under TWP was also discovered, that two buildings being arranged side-by-side exposed to TWP could be identified as being arranged in tandem with a different wind twist angle, or vice versa.