• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• 한국재난관리표준학회지
• /
• 제3권1호
• /
• pp.51-60
• /
• 2010

본 연구는 선행연구들의 하천 유역 오염물질 및 오염도 분석결과를 바탕으로 하천 오염도와 지반 오염물질 간의 상호관계에 대해 분석하였다. 크게 도시 및 산업지구 인접 하천인 낙동강, 태화강, 안양천과 농 축산지 인접 하천인 영산강, 미호천으로 구분해 연구하였으며, 대상 오염원은 중금속 오염물질로 한정하였다. 도시 및 산업지구 인접 하천의 경우 중금속 오염물질 함유량이 일치하여 상관성을 보였으나 농 축산지 인접 하천의 경우 불일치하여 상관성을 밝히기 어려웠다. 도시 및 산업지구 인접 하천의 경우 점오염원의 영향을 많이 받기 때문에 지반오염에도 직접적인 영향을 미친 것을 알 수 있었고 농 축산지 인접 하천의 경우 점오염원보다 비점오염원의 영향을 많아 하천오염도와 지반오염의 상관성이 적은 것으로 나타났다.

• 한국사회복지학
• /
• 제58권3호
• /
• pp.245-268
• /
• 2006

본 연구는 우리나라에서의 경제성장과 빈곤간의 관계에 대한 실증적 연구결과를 제공하는 것을 그 목적으로 한다. 특히 외환위기 후 2000년대 들어 경제 성장과 빈곤간의 관계에 어떤 변화가 발생했는지를 검토한다. 이를 위하여 도시가계조사 1982-2004년 원자료를 이용하여 도시지역의 빈곤율 연간자료를 구축하고, 거시경제지표로서 실질GDP와 실업율의 연간자료를 이용하였다. 분석결과 1980-1990년대에 걸쳐 우리나라에서 거시경제성장은 빈곤감소에 아주 직접적이고 중요한 역할을 담당한 것으로 나타났다. 2000년 이후에도 거시경제성장은 여전히 빈곤감소의 주요한 도구로서 작동한 것으로 나타났다. 그러나 1980-1990년대에 비해 2000년대 이후에는 거시경제성장에 의해 설명되지 않는 빈곤의 증가현상이 존재한 것으로 나타났다. 이러한 분석결과는 향후 반빈곤전략이 과거의 경제성장 우선전략에서 경제성장과 함께 사회보장제도 확충을 동시에 강조하는 전략으로 전환되어야 한다는 것을 제시한다.

• 대한건축학회논문집:계획계
• /
• 제34권4호
• /
• pp.27-34
• /
• 2018

Flat or Multiple Dwelling Houses are relatively vulnerable to crime safety. Crime prevention measures are urgently needed because crime is 2.6 times higher than in real apartments. Through the analysis of domestic and foreign crime prevention design standards, field survey, and interviews with experts, 27 items of crime prevention design criteria for flat or multiple dwelling house were derived, and ten design criteria that should be considered first by the expert AHP were derived. As a result of the pilot evaluation of existing flat or multiple dwelling house, the houses completed after 2015 have relatively high level of crime prevention, but the houses constructed before that are very vulnerable. The policy and system improvement plan based on the analysis result is as follows. First, new housing should be promoted to meet minimum criteria by supplying and educating public officials, architects, and building owners in the short term to provide criteria for flat or multiple dwelling house crime prevention plans. Second, existing housing should be supported with basic crime prevention support projects such as security windows for flat or multiple dwelling house where security of residential environment such as urban renewal policy is poor. Third, the Enforcement Decree of the Building Act shall be revised to make the crime prevention environment design of flat or multiple dwelling house obligatory, and the criteria of flat or multiple dwelling house crime prevention plan should be reflected in the notice of crime prevention building standard.

• International Journal of Computer Science & Network Security
• /
• 제21권6호
• /
• pp.23-28
• /
• 2021

The article discusses the features of adaptation of the parameters of the physical layer of data transmission in self-organizing networks based on unmanned aerial vehicles operating in the conditions of "smart cities". The concept of cities of this type is defined, the historical path of formation, the current state and prospects for further development in the aspect of transition to "smart cities" of the third generation are shown. Cities of this type are aimed at providing more comfortable and safe living conditions for citizens and autonomous automated work of all components of the urban economy. The perspective of the development of urban mobile automated technical means of infocommunications is shown, one of the leading directions of which is the creation and active use of wireless self-organizing networks based on unmanned aerial vehicles. The advantages of using small-sized unmanned aerial vehicles for organizing networks of this type are considered, as well as the range of tasks to be solved in the conditions of modern "smart cities". It is shown that for the transition to self-organizing networks in the conditions of "smart cities" of the third generation, it is necessary to ensure the adaptation of various levels of OSI network models to dynamically changing operating conditions, which is especially important for the physical layer. To maintain an acceptable level of the value of the bit error probability when transmitting command and telemetry data, it is proposed to adaptively change the coding rate depending on the signal-to-noise ratio at the receiver input (or on the number of channel decoder errors), and when transmitting payload data, it is also proposed to adaptively change the coding rate together with the choice of modulation methods that differ in energy and spectral efficiency. As options for the practical implementation of these solutions, it is proposed to use an approach based on the principles of neuro-fuzzy control, for which examples of determining the boundaries of theoretically achievable efficiency are given.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.78-91
• /
• 2024

Double steel plate concrete composite shear wall (SCSW) has been widely utilized in nuclear power plants and high-rise structures, and its shear connectors have a substantial impact on the seismic performance of SCSW. Therefore, in this study, the mechanical properties of SCSW with angle stiffening ribs as shear connections were parametrically examined for the reactor containment structure of nuclear power plants. The axial compression ratio of the SCSW, the spacing of the angle stiffening rib arrangement and the thickness of the angle stiffening rib steel plate were selected as the study parameters. Four finite element models were constructed by using the finite element program named ABAQUS to verify the experimental results of our team, and 13 finite element models were established to investigate the selected three parameters. Thus, the shear capacity, deformation capacity, ductility and energy dissipation capacity of SCSW were determined. The research results show that: compared with studs, using stiffened ribs as shear connectors can significantly enhance the mechanical properties of SCSW; When the axial compression ratio is 0.3-0.4, the seismic performance of SCSW can be maximized; with the lowering of stiffener gap, the shear bearing capacity is greatly enhanced, and when the gap is lowered to a specific distance, the shear bearing capacity has no major affect; in addition, increasing the thickness of stiffeners can significantly increase the shear capacity, ductility and energy dissipation capacity of SCSW. With the rise in the thickness of angle stiffening ribs, the improvement rate of each mechanical property index slows down. Finally, the shear bearing capacity calculation formula of SCSW with angle stiffening ribs as shear connectors is derived. The average error between the theoretical calculation formula and the finite element calculation results is 8% demonstrating that the theoretical formula is reliable. This study can provide reference for the design of SCSW.

• International Journal of Computer Science & Network Security
• /
• 제24권5호
• /
• pp.135-155
• /
• 2024

Urban public health monitoring in smart cities focuses on the control of conditions and health challenges in urban environments. Considering the rapid spread of diseases and pandemics, it is important for health authorities to trace people carrying the virus. In smart cities, this tracing must be interoperable and intelligent, especially in indoor surfaces characterized by small distances between people. Therefore, to fight pandemics, it is necessary to start with the already-existing digital equipment of the Internet of Things, such as connected objects and smartphones. In this study, the developed system is employed to provide a social IoT network and suggest a strategy which allows reliable traceability without threatening the privacy of users. This IoT-based system allows respecting the social distance between persons sharing public services in smart cities without applying smartphone applications or severe confinement. It also permits a return to normal life in case of viral pandemic and ensures the much-desired balance between economy and health. The present study analyses previous proposed social distance systems then, unlike these studies, suggests an intelligent and distributed IoT based strategy for positioning students. Two scenarios of static and dynamic optimization-based placement of Bluetooth Low Energy devices are proposed and an experimental study shows the contribution and complementarity of the introduced contact tracing strategy with the applications on smartphones.

• 한국조경학회지
• /
• 제45권4호
• /
• pp.23-34
• /
• 2017

본 연구는 도시농업의 지속가능한 실현과 도시농업과 도시공원이 융합된 도시농업공원 조성을 목적으로 대구광역시 고산골 마을을 대상으로 계획을 적용하였다. 연구의 내용은 두 가지 관점에서 의미를 가지는데, 주제공원으로서 도시농업 공원 조성 시 고려하여야 할 개발전략을 제안하는 것과 실제 적용을 위한 공간프로그램 및 도입시설에 대한 가이드라인의 제시가 이에 해당하며, 그 결과는 다음과 같다. 첫째, 도시농업공원의 조성은 도시공원의 수요적 진화로부터 유도된 지역 커뮤니티 공간으로서 역할을 담당하며, 이의 실현을 위한 농업 행위가 주제로 결합하여야 한다. 따라서 조성전략으로 '지속가능성에 중점을 둔 도시농업의 장마련', '농업 경관 중심의 녹지체계 구축', 그리고 '지역소통을 위한 여가 공간 조성' 등을 제시하였다. 둘째, 도시농업공원이 갖추어야 할 주요 기능은 '생산적 측면'의 농산물 생산과 거래, 농지임대, '환경적 측면'의 토양보존, 자원순환, 녹지제공 등, '사회문화적 측면'의 여가 및 체험, 공동체 활성화, 교육, 사회복지 등이 해당되며, 아울러 도시공원이 요구하는 위락적 기능, 생태적 기능, 보호적 기능 등이 병행되어야 한다. 셋째, 도시농업공원 조성 시 요구되는 주요 시설로는 공원관리시설을 제외한 도시농업시설, 조경시설, 휴양시설, 운동시설, 교양시설, 편익시설 등을 포함하여야 하며, 도시농업시설의 중심시설인 텃밭의 경우, 다양한 이용목적과 행태를 고려한 다양한 유형과 규모의 도입이 요구되므로, 본 계획에 반영하였다. 본 연구는 계획대상지가 특정 지역에 국한된 한계를 지니나, 공원형 도시농업 공간 조성을 위한 계획모형을 제시하였다는 데 그 의의를 가진다.

• 대한지리학회지
• /
• 제43권2호
• /
• pp.220-234
• /
• 2008

안전과 보안이 현대사회의 중요한 관심사로 등장하고 있고 그 대상 영역이 실내 공간으로 넘어서 도시로 확대되고 있다. 도심지역에 수 많은 감시 센서들이 설치 운영되고 있다. 많은 보안 모니터링 맥락에서 감시 센서/네트워크의 수행능력 혹은 효율성은 조명의 변화와 같은 환경 조건에 제약을 받는다. 서로 보완적인 상이한 유형의 센서를 설치함으로써 개별 유형의 센서의 고장 혹은 한계를 극복할 수 있다는 것은 익히 잘 알려진 사실이다. 입지 분석과 모델링의 관점에서 관심사는 어떻게 보완적인 상이한 유형의 센서들의 적절한 입지를 결정하여 보안기능을 강화할 수 있느냐 이다. 이 연구는 k 개의 상이한 유형의 감시 센서의 위치를 결정하는 커버리지 기반의 최적화 모델을 제시한다. 이 모델은 상이한 유형의 센서 사이의 공통 커버리지와 동일 유형의 센서 사이의 중복 커버지리를 동시에 고려한다. 개발된 모델은 도심 지역에 센서를 위치시키는데 적용된다. 연구 결과는 공통 및 중복 커버리지가 동시에 모델링 될 수 있으며, 두 유형의 커버지리 사이의 tradeoff를 보여주는 많은 해들이 있음을 보여준다.

• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.288-296
• /
• 2021

Automated face recognition in a runtime environment is gaining more and more important in the fields of surveillance and urban security. This is a difficult task keeping in mind the constantly volatile image landscape with varying features and attributes. For a system to be beneficial in industrial settings, it is pertinent that its efficiency isn't compromised when running on roads, intersections, and busy streets. However, recognition in such uncontrolled circumstances is a major problem in real-life applications. In this paper, the main problem of face recognition in which full face is not visible (Occlusion). This is a common occurrence as any person can change his features by wearing a scarf, sunglass or by merely growing a mustache or beard. Such types of discrepancies in facial appearance are frequently stumbled upon in an uncontrolled circumstance and possibly will be a reason to the security systems which are based upon face recognition. These types of variations are very common in a real-life environment. It has been analyzed that it has been studied less in literature but now researchers have a major focus on this type of variation. Existing state-of-the-art techniques suffer from several limitations. Most significant amongst them are low level of usability and poor response time in case of any calamity. In this paper, an improved face recognition system is developed to solve the problem of occlusion known as FRS-OCC. To build the FRS-OCC system, the color and texture features are used and then an incremental learning algorithm (Learn++) to select more informative features. Afterward, the trained stack-based autoencoder (SAE) deep learning algorithm is used to recognize a human face. Overall, the FRS-OCC system is used to introduce such algorithms which enhance the response time to guarantee a benchmark quality of service in any situation. To test and evaluate the performance of the proposed FRS-OCC system, the AR face dataset is utilized. On average, the FRS-OCC system is outperformed and achieved SE of 98.82%, SP of 98.49%, AC of 98.76% and AUC of 0.9995 compared to other state-of-the-art methods. The obtained results indicate that the FRS-OCC system can be used in any surveillance application.