• 연구논문집
• /
• 통권29호
• /
• pp.57-67
• /
• 1999

This paper presents the status quo of the development of a piecewise bendable switch system for the urban transit MagLev. MagLev system as well as railroad requires switch systems to reach its destination. Requirements of the switch system for commercial lines are high speed operation satisfying about 2-3 minute headway and system reliability, etc. Parallel moving type switch system was installed on the test track of urban transit MagLev in KIMM. In this system, switch operation from one position to another can be done in about 90 seconds. Therefore, we concluded that this system can not satisfy the headway for the commercial lines. We decided to develop a high speed piecewise bendable switch system in which switching can be done in 20 seconds. Designed switch system is very complicated in view of operating mechanism. It consists of 11 segmented girder beams driven by hydraulic cylinders. To gain the idea of a piecewise bendable switch system, we manufactured and tested a 1/5 scale switch model. We are going to construct a full scale piecewise bendable switch system next year.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1323-1325
• /
• 2003

In field of Urban transit safely, It must be not only secured vehicle but also every areas like power, signal, communication, track, tunnel, operating facilities. Likewise it is very important not only hardware system like vehicles, facilities but also software system like action of engine driver, duty officer. In other to secure safety of hardware, soft ware, it is very important systemic process. In Korea, Many operating companies neglect to invest in safely and ignore technical development about safety because of management. Safely was considered in subway system and many studies were accomplished about safety in subway system in advanced county like U.K, USA. Hence, in this paper, Conditions and improvement of minimum considerable hardware and software are proposed for safe operation in Urban transit.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1092-1096
• /
• 2011

The "standard regulation" of the vehicles from "urban transit law" are being adopted to electric multiple unit in domestic. In the standard regulation, there are two types for EMU. One is heavy EMU for Seoul. The other is large EMU for Pusan, Daegu, Gwangju, Daejeon, Incheon. Korea Railroad Research Institute, with the assistance of the Ministry of Land, Transport and Maritime Affairs, "advanced EMU development project" are progressed, and 6th year started at September, one unit to six cars is completed. Now "urban transit vehicle performance tests are on the current progress. The main characteristics of AUTS(Advanced Urban Transit System) are as follows. One inverter control one motor, DDM(Dircet Drive Motor), no driving gear, plug door and steps, mounting and maintenance costs down, passenger convenience improvement. This paper describes the key features the next generation EMU, and performance test results, and the commercial success method of national R&D business.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.777-784
• /
• 2016

본 연구에서는 도시철도에 사용되는 방진체결장치가 현장에서 부담하는 하중의 체계적 평가를 통하여 방진체결장치의 성능시험하중에 대한 기준이 정립되었다. 방진체결장치가 가질 수 있는 동적 강성 범위를 알아보기 위하여 국내에서 공급 가능한 3가지 유형의 방진체결장치들에 대하여 동적 시험을 수행하였다. 이들 방진체결장치에 작용하는 하중을 평가하기 위하여 동적 강성을 변화하면서 차량-궤도 상호작용해석을 수행하였다. 해석의 중요 입력요소인 궤도틀림은 측정자료를 토대로 도출된 궤도틀림 PSD(Power Spectral Density) 회귀 함수로 고려하였다. 도시철도의 다양한 운영환경을 고려하여 방진체결장치에 작용하는 하중을 평가한 후, 평가된 하중을 토대로 방진체결장치의 성능시험하중에 대한 기준을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.729-733
• /
• 2007

Urban transit is a large scale complex system which combines rolling stocks, power supply, signal communications, tracks & stations. Therefore standardization is very important because it is difficult to find causes when failures or accidents occur. The standardization of urban transit increases safety and economical efficiency, and also gives passengers convenient and comfortable feeling. We, Korea Railroad Research Institute(KRRI), had finished the 1st phase study of urban transit standardization from '95 to '06. And 2nd phase study on rolling stock, information & communication, subway station has been performed from July '07. In this paper, we introduce what we study on urban transits standardization during coming 5 years. We expect our study will contribute to increase the efficiency of urban transit.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.315-320
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• International journal of advanced smart convergence
• /
• 제12권1호
• /
• pp.220-229
• /
• 2023

The development of logistics technology due to the 4th Industrial Revolution and logistics 4.0 has changed the logistics environment from offline to online, and the growth of the online market has accelerated due to the recent increase in non-face-to-face delivery due to COVID-19. Such growth in the online market has expanded the logistics market for delivery, and contributes to creating an advanced logistics ecosystem as last mile services and logistics technologies begin to grow together. As traffic and environmental problems arise as a result, interest in transportation means of cargo increases, and changes to cargo electric vehicles and delivery cycles are being considered. However, since mass transportation of transportation focused on terminal delivery such as cargo electric vehicles and delivery cycles is limited in handling large quantities in urban areas, methods for efficiently transporting cargo while considering the environment are being devised. In order to solve such environmental problems and increase the efficiency of logistics delivery in urban areas, technologies using underground spaces based on existing urban railroads are being developed. In this study, a study was conducted on the establishment of evaluation criteria for selecting a test bed, which is a space for applying the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.259-261
• /
• 2005

The hydraulic brake system is recently apply to the AGT system such merit as installation is convenient and brake force is stronger than pneumatic brake system. The hydraulic brake system consist of brake operating unit, electronic control unit, air compressor and pneumatic/hydraulic tranducer. The components of it are controlled and designed to perform the function of brake system. Therefore, This paper design and the hydraulic brake system and propose the detection of development for Urban Transit System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.256-258
• /
• 2005

EMU system is system that o(for target performance and function because various lower part system such as vehicles, signaling, power supply, rail track is consisted as complex. It is important first of all that describe correctly system requirement until configuration of system, design, manufacture, installation and test verification so that the complicated urban transit system is to act safety and reliable and to display target performance and function properly. The system requirement assist the system developer to comprehensive the performance and function of system in basic design. Therefore, In this paper wishes to study way to analyze system of system requirement and apply to Urban transit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.218-220
• /
• 2008

Urban air quality, including carbon-dioxide emissions, and national energy security are related issues affecting the rail industry and transportation sector as a whole. They are related by the fact that (in the United States) 97-98% of the energy for the transport sector is based on oil, and more than 60% is imported. A fuelcell locomotive combines the environmental advantages of a catenary-electric locomotive with the higher overall energy efficiency and lower infrastructure costs of a diesel-electric. Catenaryelectric locomotives, when viewed as only one component of a distributed machine that includes an electricity-generating plant and transmission lines, are the least energy-efficient locomotive type. The natural fuel for a fuelcell is hydrogen, which can be produced from many renewable energies and nuclear energy, and thus a hydrogen-fuelcell locomotive will not depend on imported oil for its energy supply. This paper proposes a base models of Hybrid fuel cell/IPT railway vehicle power system, the necessary of this research.