• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.217-231
• /
• 2017

The subsidence of ground in urban area can be caused by the occurrence of the cavity and the change in ground volumetric water content. The objective of this study is the detection of abnormal area of ground in urban area where the cavity or the change in ground volumetric water content is occurred by the ground penetrating radar signal. GPR survey is carried out on the test bed with a circular buried object. From the GPR survey, the signals filtered by the bandpass filtering are measured, and the methods consisting of gain function, time zero, background removal, deconvolution and display gain are applied to the filtered signals. As a result of application of the signal processing methods, the polarity of signal corresponds with the relation of electrical impedance of the cavity and the ground in test bed. In addition, the relative permittivity calculated by GPR signal is compared with that of predicted by volumetric water content of the test bed. The relative permittivities obtained from two different methods show similar values. Therefore, the abnormal area where the change in ground volumetric water content is occurred can be detected from the results of the GPR survey in case the depth of underground utilities is known. Signal processing methods and estimation of relative permittivity performed in this study may be effectively used to detect the abnormal area of ground in urban area.

• Korean Journal of Remote Sensing
• /
• v.27 no.6
• /
• pp.637-651
• /
• 2011

This study presents a rule-based urban image classification method for time series analysis of changes in the vicinity of Asan-si and Cheonan-si in Chungcheongnam-do, using Landsat satellite images (1991-2006). The area has been highly developed through the relocation of industrial facilities, land development, construction of a high-speed railroad, and an extension of the subway. To determine the yearly changing pattern of the urban area, eleven classes were made depending on the trend of development. An algorithm was generalized for the rules to be applied as an unsupervised classification, without the need of training area. The analysis results show that the urban zone of the research area has increased by about 1.53 times, and each correlation graph confirmed the distribution of the Built Up Index (BUI) values for each class. To evaluate the rule-based classification, coverage and accuracy were assessed. When Optimal allowable factor=0.36, the coverage of the rule was 98.4%, and for the test using ground data from 1991 to 2006, overall accuracy was 99.49%. It was confirmed that the method suggested to determine the maximum allowable factor correlates to the accuracy test results using ground data. Among the multiple images, available data was used as best as possible and classification accuracy could be improved since optimal classification to suit objectives was possible. The rule-based urban image classification method is expected to be applied to time series image analyses such as thematic mapping for urban development, urban development, and monitoring of environmental changes.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.772-774
• /
• 2012

최근 차량과 플랫폼 사이의 공간에 휠체어의 바퀴 또는 승객의 발이 빠지는 등의 안전사고가 보고되고 있어 교통약자의 이동을 제한하는 요소로 작용함에 따라 차량과 플랫폼 사이 공간을 메우는 안전스텝을 개발하게 되었다. 안전스텝으로 기존 플랫폼에 설치하는 고무타입은 고정식 고무발판을 미리 설치해 두어 차량과 플랫폼의 간격을 미리 줄이는 방식이나 직선, 곡선 형태의 각각의 역사가 가지는 조건에 유연하게 대응하고, 차량의 승객수와 플랫폼의 조건에 따라 달라지는 승하차 높이에 유연하게 대응하고자 차량에 설치하는 방식을 개발하게 되었다. 본 논문에서는 개발한 안전스텝의 구성 및 기능을 설명하고 논하고자 한다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.722-729
• /
• 2010

Deciding peak-time demand will be most important factor to decide facilities' capacity of complex transfer centers. Concentration of demand is growing more and more in urban railroad that has 3 minutes headway by using MOE of 15 minutes demand. It is far from reality. Moreover there are various demand and reflection of business facilities' demand and commerce facilities' demand is being requested in complex transfer centers. This study focused on it and suggested demand calculation method about facility design of complex transfer centers.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.259-261
• /
• 2005

The hydraulic brake system is recently apply to the AGT system such merit as installation is convenient and brake force is stronger than pneumatic brake system. The hydraulic brake system consist of brake operating unit, electronic control unit, air compressor and pneumatic/hydraulic tranducer. The components of it are controlled and designed to perform the function of brake system. Therefore, This paper design and the hydraulic brake system and propose the detection of development for Urban Transit System.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1244-1247
• /
• 2002

The blending brake is mixed brake system which is operated by electrical and mechanical brake simultaneously. Most of urban transit system is used with blending brake unit. In order to train is align at the stopping position. The blending brake shall be presicely operated to the train. Many parameters are influence on the train when train is stopped on presicion position by blending brake. It is considered such parameters as decceleration, variable load, jerk, friction cofficient, etc. Therefore, This paper consider the parameter and describes the blending control for standard EMU. The control algorithm of it is proposed and simulation of it carried out by using MATLAB. Also Electronic control unit is manufactured with micro procesor which is configured fot blending control and is verified by performance test.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.478-485
• /
• 2017

Urban DC railways have played an important role in urban transportation, and railway operation and energy management have been emphasized to be important to achieve maximum efficiency from existing infrastructure. Fast, accurate DC railway power flow analysis is required to operate a DC railway efficiently, and this paper proposes a novel methodology to analyze the DC railway power network by implementing the participation factor (PF). The PF concept consists of a correlation between the vehicle and the substation, as explained using zones based on the position of the vehicles running on the route. Then, the DC railway powerflow is calculated using the PF concept. Finally, the usability of the proposed method was validated via case studies with actual railway operation data, and we discuss some of the advantages of the suggested methodology.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2181-2182
• /
• 2011

This paper deals with power integration of large urban railway systems for improvement of regenerative energy utilization. The main idea of this paper is that the integration of railway power systems will increase efficiency through sharing regenerative energy. To verify the effects of this system, case studies for Seoul Metro Line has been performed. Where railway data of Seoul Subway Line 5 and Line 7 are used. In this work, the integrated railway system is modelled using Compaq Visual Fortran.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.626-631
• /
• 2007

With its critical pending task of putting the management into the right track, it is extremely important for the Korea Railroad Corporation to incorporate more reasonable distribution into train consists to cut down its operation costs and attain higher income surplus in the Metropolitan Train Business. Furthermore, for Jung-ang Line soon to be operated without any crew on-board, more adequate train formation looks very indispensable mainly to satisfy transportation demands as well as enhance the passenger safety. This paper will examine the Jung-ang Line with hourly-basis congestions and inter station O/Ds to get the better operation schedules and trainset numbers.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.449-451
• /
• 1999

When the traction motor for urban transit E.M.U is driven with VVVF controlled inverter, the insulation degradation factors on the 200 Class insulation system of VPI process are analyzed with considering dielectric, mechanical properties, thermal stability, chemical resistivity and compatibility. A new test method of complex accelerating degradation is proposed to evaluate the insulation reliability and the long-term life including harmonic loss and transient surge stress due to PWM inverter drive.