• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1508-1516
• /
• 2015

This paper proposes the optimal operation of ESS (Energy Storage System) in the substation of urban railway in an economical point of view. Since the load patterns of urban railway have different characteristics with the general power demand pattern, the characteristics motivate us to develop the optimal operation algorithm for ESS under Korean electricity billing system. We also introduce two different ESS operation strategies for peak load shaving and electricity consumption charge minimization respectively, and formulate each scheme. Historical data from Namgwangju substation are used for economical comparison of the strategies. The results show that the proposed algorithm is the most cost-effective ESS operation scheme among the strategies and reduces around 5 percent of electric charges compared to the charge without ESS operation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1324-1328
• /
• 2013

The reason of train location detection is generally the train interval control between the railway stations and the train path control in the railway station yard in order to avoid train collision. It is very important to know the train location for shortening the train headway, and improving the efficiency of railway maintenance as well as the safe operation of trains. Therefore, the accurate detection of train location is the prerequisite technology in railway signalling system. The track circuit and the wheel sensor of rolling stock have been used to detect the train location widely in urban railway as well as high speed train. The track circuit is continuously monitored by electrical equipment to detect the absence of the train and the tachometer and encoder is used for the wheel sensor to measure the train speed. But speed sensor failures are frequent due to the extremely harsh operating conditions encountered in rail vehicle. The CBTC(Communication based Train Control) system has been used in urban railway system recently. But the installation of CBTC system is very high and the modification of design is difficult. This paper deals with the feasibility of new train location detection method using magnetic sensors.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.31-40
• /
• 2019

Considering the situation in the early 20th century when the existing urban system centered on urban areas began to change, the biggest factors causing urban structural changes in urban areas are construction of railroad and urban dismantling. The change process of Eupseong, in the microscopic viewpoint, can be understood as a process of change in the course of dismantlement of town's demarcation, improvement of accessibility and urban expansion due to the construction of railroads, process of urban expansion following the crumbling boundaries and structural changes. This study aimed to look at the transformation process of the Eupseong in the early 20th century, focusing on the demolition of the castle and the railway construction from a microscopic point of view of city.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2323-2328
• /
• 2011

There have been many changes in Subway train types since SeoulMetro opened the Line No.1 in 1974. Propulsion control device has changed many times following the generations of control method from resistance control method which uses large resistor for the traction motor control to chopping control which uses power semiconductors and finally to inverter control. Railroad vehicle propulsion control device refers to devices such as converter/inverter which supply power for subway operation, power conversion equipment like small switching-mode power supply and traction motor. In this paper, we will analyze every part of railroad vehicle propulsion control device of SeoulMetro so we can find problems in the subway operation. And we will present propulsion control device model which makes minimized failures, efficient maintenance possible when replacing railroad vehicle later. By doing this, we hope to ensure stability and improve energy efficiency to the top.

• International Journal of Railway
• /
• v.5 no.3
• /
• pp.124-128
• /
• 2012

The ESS(energy storage system, here after) for a DC 1500V was developed in 2009. A ESS was installed on the track of Daejeon HRT in 2010. The advantage of the ESS is that it can save the energy and plus stable the catenary voltage. This paper presents the energy saved by the ESS in Daedong substation. When the ESS is on/off, the field tests are performed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1016-1017
• /
• 2008

도시철도시스템은 각 역간, 또는 역과 관제실간 많은 양의 데이터 전송을 통해 운용 및 관리되어진다. 역간 또는 관제실과의 인터페이스 정보는 도시철도 시스템의 효율적인 운용을 위한 정보들 뿐만아니라 열차의 안전운행에 필수적인 열차제어 정보들도 포함되어진다. 이러한 도시철도시스템의 운용에 필수적인 디지털 전송시스템의 운용현황과 전송기술의 발전방향을 분석하고, 이를 통해 도시철도 전송시스템의 발전방향을 분석한다.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.213-214
• /
• 2008

Since standardization project is composed of complicate system, such as vehicle, signal, electric power and railway, how to build management system of the project has influence on the success of the project for the first stage of the project. The computer system design tool supports to carry out requirement analysis, DB construction, and history and follow-up management efficiently. Therefore, the aim of this study is to investigate the method to optimize schema using computer system design tool.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.384-389
• /
• 2010

Workers maintaining at the railroad trackside may collide with the train since they cannot recognize the train approaching because of the sensory block phenomenon occurred due to their long hours of continued monotonous maintenance work. To reduce these casualty accidents of maintenance workers working at the trackside of railroad, we developed the wireless communication-based safety equipment for preventing accidents. The motor-cars for maintaining trackside facility have unique operational patterns suitable for urban environment. The several mechanism for developed safety equipment are represented in this paper.

• Tribology and Lubricants
• /
• v.28 no.1
• /
• pp.19-26
• /
• 2012

Rolling contact fatigue of an urban railway wheel was analysed during its rolling. A FEM analysis was performed using a 3D modelling of rail and wheel, considering the slope of the rail and nonlinear isotropic and kinematic hardening behavior of the rail and the wheel. The maximum von-Mises stress and contact pressure between the rail and wheel were 656.9 MPa and 1111.4 MPa, respectively, under axial load of 85 kN with friction coefficient of 0. The fatigue initiation life prediction relationships by strain-lifetime (${\varepsilon}$-N) and Smith-Watson-Topper method were drawn for the wheel steel as follows: $N_i=7.35{\times}10^6{\times}SWT^{-3.56}$ and $N_i=5.41{\times}10^{-9}{\times}(\frac{{\Delta}{\varepsilon}}{2})^{-5.77}$. The fatigue lifetimes of the wheel due to rolling contact were determined to be infinite by ${\varepsilon}$-N and SWT methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.107-109
• /
• 2004

Assuming that life of urban transit signaling is about 20 years with the flow of technology development, Seoul urban transit will be required to prepare for improvement soon. The highly developed countries preceding several levels rather than Korea are faced with commercial service, which uses RF, ATC and ATO in Train Control System. European highly developed countries in the field of railroad have been progressing standardization and technology development of signaling associated with related manufacturers for direct operation between nations. For that, a effective train control system with radio beyond control levels by the existing wayside-onboard communication is in a developed and used stage. The systems, which advanced countries have been progressing, seem to be applied to domestic within 5 years from now. At present, there are no countries using CBTC for service throughout the world. So, this is investigated to focus on the routes ready to be installed with completed CBTC and trying to introduce the technology. Especially, considerations for economic aspect are mainly reviewed about controlling ability of headway, flexibility, extension aspect and construction cost on the basis of paper examined in NYCT.