• 한국철도학회논문집
• /
• 제16권2호
• /
• pp.129-137
• /
• 2013

본 연구는 최근 도시개발에 있어 관심사로 대두되고 있는 대중교통지향형 개발(TOD)에 대한 바람직한 개발방향을 모색하고, 서울시 역세권을 환승특성 유형별로 구분하여 실증분석을 통해 이에 대한 분석결과를 제시하는데 목적을 두고 수행하였다. 대중교통 이용자 특성에 미치는 영향력은 환승특성 유형별로 차이가 있는 것으로 규명 되었다. 향후 수도권의 대중교통전략 수집 시 차별화된 영향요소를 기반으로 개선(안)을 도출하는 것이 필요하며, 향후 지속적인 대중교통 이용수요 증진을 위한 기초를 마련해야 한다고 판단된다. 또한 지하철역과 직접적인 연계를 하기 보다는 보조적인 수단으로 버스전용차로(BRT)를 적절하게 연계하여 현재 단일역세권을 거점화하는 것이 필요하다고 판단된다.

• 한국ITS학회 논문지
• /
• 제22권6호
• /
• pp.66-76
• /
• 2023

최근 정부는 교통약자의 이동권 보장 및 증진을 위한 다양한 정책들을 시행하고 있다. 하지만 광역 대중교통 관점에서 바라본 교통약자의 이동권은 아직 미흡한 상황이다. 현재 대부분의 신도시 지역은 도시철도 노선이 부족하고, 고상 버스 중심의 광역교통망 확충이 이루어지고 있으며, 휠체어 이용자의 지역 간 이동을 위한 버스는 현재 2층 저상 좌석버스가 유일하다. 이에 본 연구에서는 저상 좌석버스 도입에 대한 사업의 필요성과 당위성 제시를 목표로 이용자의 지불의사금액을 조건부가치측정법을 통해 추정하였다. 지불의사 유도방법에는 개방형과 양분선택형 질문방식을 채택하였다. 지불의사금액 추정을 위해 이항로짓모형을 활용하였으며, 그 결과 일반인은 126.7원, 교통약자는 117.5원을 추가 지불할 의사가 있는 것으로 분석되었고, 이를 연간 경제적 편익으로 환산 시 약 350억원으로 산출되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.682-684
• /
• 2002

There is much room for consideration that the magnet design of UTM. When the vehicle runs 60mR curved line on test track, the ratio of cross section area changed to cross the magnet pole and rail. The ratio is reduced about 20% of the total magnet on one bogie. Therefor, magnet current is increased about 3.5A to maintain constant air gap. This paper suggest to margin of the magent design is 1.1 rather than rated levitation force.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.173-180
• /
• 2011

Recently, many railway stations are built under the railway line in urban area. The passage of railway vehicles generates mechanical vibrations of a wide range of frequency. Thus, it is required to place structural vibration isolation systems to reduce vibration and noise originating from surrounding environments. This study is to investigate the maximum floating slab length based on track/floating slab interaction analyses. Actions to be taken into account include temperature, braking/acceleration, bending of the deck, and creep/shrinkage. The additional rail stress has been chosen for the criterion for the maximum slab length. In addition, further analyses are performed to include the stopper which restrict the in-plane movement of the floating slab track. Several alternatives for stopper positions were thoroughly studied in this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.939-950
• /
• 2011

In this study, the load test of rubber tire bogie for monorail type LRT. Bogie for rolling stock in safety operation of the vehicle as an essential core unit before applying to the vehicle safety and reliability should be tested sufficiently. Rubber tire monorail type bogie compared to the traditional bogie wheel lots of formats, the complexity of the load acting static load test, the bogie of the vehicle operation conditions by structural analysis by considering the loading conditions was evaluated by calculating. Test methods and evaluation criteria based on urban rail vehicle performance testing by applying the test were welded parts and materials for the results leading to material fatigue endurance test by applying the result of evaluating the structure has been identified as safe.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1667-1673
• /
• 2011

For performance evaluation of modified wide sleepers(MF-140 PSC sleepers), design moment for urban transit was calculated and then performance evaluation criteria were set up according to EN 13230-2. Next, static bend tests, dynamic tests at rail seat section of sleeper were carried out and static bend tests at center section of sleeper were fulfilled. The test results for modified wide sleepers were in excess of performance evaluation criteria and structural safety of sleepers was able to guaranteed from the results. As modifying depth of wide sleepers, construction convenience in underground will be expected to be improved and construction costs will be expected to be decreased.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.382-399
• /
• 2011

Impact factor of concrete and ballast track which has been used in Korea railway was applied to equation (1+0.513V/100) from AREA. As the use of this equation, overcapacity of track design might be occurred. Therefore, this study compared impact of ballast track (well, bad) and concrete track (sleeper embeded system, rail floating and sleeper floating) by field test to analyzing dynamic effect of track structure's characteristic and wheel load on service line. In addition, it suggested a method to generate reasonable track impact factor on each track type.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1108-1114
• /
• 2011

In general, railway system uses wheels so detecting speed by tachometer. However, LRT(Light Rail Transits) stands out recently as alternatives transportation, and besides of that Maglev trains are emerged as an alternative means of transportation. Maglev operates above certain heights caused inability of the measurement by tachometer which used to detect speed of wheels. Velocity Detection Signal Device of Train Control System applied in "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train" which is prepared ahead of opening in 2013. This paper, therefore, explains the function and operation principal of Velocity Detection Signal Device, and suggests installation method of velocity detection loop installed around the track.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.194-199
• /
• 2003

The traction drive system for the urban transit Rubber-tire system is described in this paper. To control the magnitude and frequency of the output voltage of induction motor transiently, the vector control strategy is generally used. But in case of the traction drive system for the railway vehicle, it is difficult to use the vector control caused by the one-pulse mode in the high speed region. Therefore, this paper proposes the control strategy combined the vector control in the low speed region and the slip frequency control in the high speed region. And also, the overmodulation PWM method is discussed to make the change to the one-pulse mode softly. The performance of the Proposed traction drive system is verified by the MATLAB simulation results.

• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.299-306
• /
• 2001

전기철도차량의 성능특성을 향상시키기 위한 효과적인 방법중의 하나는 바퀴와 레일사이의 점착성능을 향상시키는 것이다. 점착특성을 연구하기 위해서 실제 차량을 등가 모델링한 점착시스템을 제작하였다. 이 시스템은 다양한 점착 파라미터를 변화시켜 바퀴와 레일사이의 점착력을 바꿀 수 있도록 제작되었다. 이 논문은 공전속도에 의한 토오크제어 방법으로써 공전속도의 진동을 억제하기 위한 연구이다.