• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.393-399
• /
• 2018

It is well recognized that residual stresses of the rails, generated from the manufacturing process including roller straightening and heat treatment, play an important role in determining fatigue and fracture properties of the rails. Thus, it has been a challenge to measure the residual stresses accurately. In this work, contour method was employed to evaluate the residual stresses existing in interior of the rails. The cross section perpendicular to the longitudinal direction of the rail was cut at a very slow rate using electric discharge machining (EDM), after which a laser-based flexural measuring instrument enabled us to precisely measure the flection of the cross section. The measured data were converted into the residual stresses using the commercial finite element package, ABAQUS, through a user-defined element (UEL) subroutine, and the residual stresses of the new rails (50N, KR60, UIC60) with three different specifications were compared.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.52-59
• /
• 2022

Currently, Korea is an aging society and is expected to become a super-aged society in about four years. X-ray devices are widely used for early diagnosis in hospitals, and many X-ray technologies are being developed. The development of X-ray device technology is important, but it is also important to increase the reliability of the device through accurate data management. Sensor nodes such as temperature, voltage, and current of the diagnosis device may malfunction or transmit inaccurate data due to various causes such as failure or power outage. Therefore, in this study, the temperature, tube voltage, and tube current data related to each sensor and detection circuit of the diagnostic X-ray imaging device were measured and analyzed. Based on QC data, device failure prediction and diagnosis algorithms were designed and performed. The fault diagnosis algorithm can configure a simulator capable of setting user parameter values, displaying sensor output graphs, and displaying signs of sensor abnormalities, and can check the detection results when each sensor is operating normally and when the sensor is abnormal. It is judged that efficient device management and diagnosis is possible because it monitors abnormal data values (temperature, voltage, current) in real time and automatically diagnoses failures by feeding back the abnormal values detected at each stage. Although this algorithm cannot predict all failures related to temperature, voltage, and current of diagnostic X-ray imaging devices, it can detect temperature rise, bouncing values, device physical limits, input/output values, and radiation-related anomalies. exposure. If a value exceeding the maximum variation value of each data occurs, it is judged that it will be possible to check and respond in preparation for device failure. If a device's sensor fails, unexpected accidents may occur, increasing costs and risks, and regular maintenance cannot cope with all errors or failures. Therefore, since real-time maintenance through continuous data monitoring is possible, reliability improvement, maintenance cost reduction, and efficient management of equipment are expected to be possible.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.2
• /
• pp.349-365
• /
• 2014

Chungcheongbuk-do can be said that it is not developed well because its surface accounts for 7.5% of Korea's whole land surface, and it accounts for 3.1% of population and main economical index from those of whole Korea. However, Chungcheongbuk-do should develop itself more by integrating of Cheongju-si and Cheongwon-gun, transfer of government facilities to Sejong city, and dispersing manufacturing companies of Seoul Metropolitan area. The factor which affects Chungcheongbuk-do's regional specialized industries is the distance from Cheongju-si and Gyeonggi-do. Service industries are specialized in urban area; manufacturing industries are specialized in regions which are close to Cheongju-si or Gyeonggi-do; and primary industries and consumer service industries are specialized in areas that is far from Cheongju-si. This study can be a foundation for studies on regional and industrial change of Chungcheongbuk-do by looking at its population and location quotient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.217-223
• /
• 2019

The application of 3D printing technology is expanding due to the production of the complex-shape parts and the one-step manufacturing process. Moreover, various technical solutions in 3D printing are emerging through continuous research and development. Representative technologies include SLS technology, in which a desired area is sintered and laminated by irradiating a powder-type material with a laser. In addition, high-performance engineering plastic parts are being manufactured in increasing numbers. In this study, tensile specimens were fabricated from polyamide 12, a widely available polymer, and the glass bead-reinforced polyamide 12. The specimen-build orientation was divided into 0°, 45°, and 90° on the fabrication platform, and the tensile test temperature was -25℃, 25℃, and 60℃. The test results showed that the tensile modulus of both materials decreases as the build orientation becomes closer to 90°. In addition, the tensile strength of glass bead-reinforced PA12 showed more dependence on the build orientation than PA12. In addition, the tensile modulus and tensile strength decreased with increasing test temperature.

• Journal of the Korean Regional Science Association
• /
• v.31 no.4
• /
• pp.107-128
• /
• 2015

Technology innovation is a competitive weapon of sustainable economic growth at the urban and regional level and the growth of firms. In this study, we empirically investigate the effects of collaborative R&D activity on product innovative outputs and process innovative outputs in manufacturing firms in Korea. We analyze the links between collaborative R&D activity and two types of innovative outputs using an alternative negative binomial regression model. The major finding is that collaborative R&D activity has significant positive effects on both product and process innovation. The results also identify a positive link between all types of innovative outputs and other R&D activities including internal R&D activity, patent activity, external technology and capital goods acquisitions. To induce corporate growth that enhances the productivity of individual firms and produces prolonged economic growth, policy makers should place greater emphasis on creating effective arrangements to promote establishing collaborative R&D strategies for manufacturing firms.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.58-64
• /
• 2020

Large-scale flooding due to extreme weather and typhoons causes heavy damage. This is especially true in urban areas where accumulated debris prevents the smooth drainage of rainwater in sewage facilities such as rain gutters installed near roads. In this study, to improve the drainage performance and effectively remove foreign substances by applying the dust screen used in rivers, the rain gutter with Coanda effect was simulated and compared with the experiment. The simulation was performed by setting the parameters to the fillet radius R₁ and R₂ at the top of the screen filter, the fillet radius R₃ at the bottom of the screen filter, and the height H of the gap W from the bottom. W is the gap at the backside of screen filter which is applied to stimulate the Coanda effect. According to the simulation results, the highest drain performance was 87.99% derived from R₁= 30mm, R₂= 5mm, R₃= 85mm, H= 75mm, and W= 2mm. The error rate of simulation results refer to the 4.89%~7.36% compared to the experimental results. In the future, by considering the slope according to the installation environment, the simulation results can be applied to the actual roadside to help prevent flood damage.

• Journal of the Korean association of regional geographers
• /
• v.11 no.6
• /
• pp.571-584
• /
• 2005

The population concentration in the Capital region of Korea has become an important issue for the pursuit of the balanced regional human capital development. Considering migration both as a geographic and a social movement, migration to the capital region could be examined in the push factors and the selective migrant characteristics from the out-migration region. Their relative importance reveals that age and education level are important in almost all years, but the importance of the percentage of manufacturing sector and rural/urban region moves to the years of education, the percentage of unskilled occupation and manufacturing sector and unemployment ratio recently. Since the brain drain has been occurring under the highly unbalanced regional development in Korea, the results suggest that regional human capital investment should be accompanied with enlarging quality employment opportunities to reap the benefits.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.35-56
• /
• 1995

During the last two decades, Korea has achieved remarkable economic growth. In this process the nation has become urbanized and industrialized. But we have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Rapid increasing urbanization and continuous migration toward Seoul since the late 1960s have been one of the major concerns of government. Government has sought ways to moderate the population increase in Seoul. The regulation which include new town development near Seoul and dispersion strategies of higher education and other administration and living facilities outside of Seoul havemade a great expansion of the spatial influence of Seoul city. Seoul metropolitan reaion has evolved as the most powerful center of political and economical spaces. Generally within a metropolitan region, there exists a growing mutual interdependence economically, as well as socially between a central city and its surrounding area. Seoul metropolitan region manifests itself not only as a coherent system of urbanized regions, but also as an integral part of the daily urban system. The surrounding Gyunggi province and Seoul city become closely linked both economically and functionally, constituting true functlonai urban system. This study is primarily undertaken with the purpose of delineation of the sphere of influence of Seoul city in 1990. At the time of 1985, Seoul metropolitan region was delineated according to the result of the study which was performed by Korea Research Institute for Human Settlements. Afterward, the rapid speed of metropolitanization process with dramatic increase in mobility through the provision of wider transportation system across the Capital region have evolved, resulting in the great expansion of the spatial influence of Seoul city. So this study examines the expanded area of Seoul metropolitan regin during the period of 1985-90. In order to delineate Seoul metropolitan region, the indices of urbanization and functional linkage are selected. Variables included in the measurement of the urbanization level are agricultural structure, population characteristics, manufacturing and service industries, and cultural aspects such as newspaper circulation, the ratio of car ownership and piped water supply. Variables included in the measurement of functional linkage are commuting, shopping pattern, centralized service such as medical facilities and trade of agricultural products. The standardization method and factor analysis are employed in making the delineation of Seoul metropolitan region. According to the result of this study, 2 cities, 8 Eups and 46 Myuns are included Seoul metropolitan region in 1990. If we compare this delineated area in 1990 to that of 1985, we can find the distinctive pattern of expanded axes according to the main transportation routes such as Seoul-Suweon, Seoul-Gwangju, Seoul-Incheon. In 199O, all the Gyunggi province, except a few Myuns located at the north and northwest part of Gyunggi province, are included in Seoul metropolitan region. Furthermore, this study attempts to the analysis of regional structure of Seoul metropolitan region according to the functional characteristics of each city and Gun. Variables included in this analysis are the new residential function, manufacturing function, service function, education and infermation function, public facility function and agricultural function. Factor analysis and cluster analysis are employed in making regionalization. Seoul metropolitan reaion is subdivided into four subregions which reflect different functional specialization. The first group is the specialized region of newly formed residential function. The second group is the specialized reaion of manufacturing function. The third group is the specialized region of service function. And the fourth group has little specialized in terms of manufacturing, service, and residential function. But this region has some potentiality of development when Seoul metropolitan region grow continuously. Seoul metropolitan region accounted for 43% of national population, despite 11.8% of national land size in 1990. Although Seoul metropolitan region enjoys important agglomeration economies, it also has huge social cost in the form of transportation congestion, housing shortage, rapid increase of land value, environment pollution, and etc. Efficient metropolitan plan making is a vital element in promoting Seoul's economic development and providing high quality living environment at low cost. In the light of the result of this study, the outer ring of Seoul metropolitan region, especially northeastern part, are underdeveloped compared to overdeveloped southwestern area. It is needed to develop the guidelines for the implement of the growth control and management plan, inducing more balanced development for whole Seoul metropolitan reaion.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2014

Following the technology developments of traffic network and communication for the wide area, the importance of the cooperation system to vitalize the wide area economy is increasing. Therefore, in this study, DongNam Kwon industry information system is established for the industrial information sharing based on GIS in the DongNam Kwon wide area economy. The DongNam Kwon is an industrial integration area centered with the manufacturing so that the operation of effective industrial cluster and cooperation systems are required across the administrational boundaries. To establish the database of the information, the information system was established utilizing already established industrial databases in Busan, Ulsan and Gyeongnam. But, various issues caused by the discordances among the data of each local government and the insufficiency of GIS based location information have been found. According to the analysis, the standardization considering the courses of collection, distributions and utilization are required immediately to solve the issues. This study establishes an 2-way industrial information system enabling the information creation and the phased approach between the administrator and the user in the bi-directions on the web by utilizing cadastral and numerical maps. The result of this study would have a meaning in providing a fundamental frame for cooperative responses and cooperation system for DongNam Kwon's industrial promotion using industrial information sharing.

• Journal of the Korean Regional Science Association
• /
• v.15 no.2
• /
• pp.155-187
• /
• 1999

The East Asian Region has experienced remarkable economic growth and transformation of interurban networking over the past three decades, and urban competiti veness for a networking hub in this region has become a critical issue confronting cities. Competitiveness of the Seoul capital region for a networking hub in Northeast Asia is outstripped by other competing cities in East Asia, notwithstanding its geo-politically and geo-economically advantageous location in this region. In this paper, we aim to appraise the Seoul capital region's competitiveness in terms of logistics distribution, financial function and logistics distribution, financial function and agglomeration of transnational corporations (especially of RHOs and other managerial functions), and to advance the networking strategies of the region for a Northeast Asia hyb. As a result of analysis, we suggest that the Seoul capital region be developed as a Northeast Asian center for regional headquarters or leading global corporations and financial services for being a strategic nodal point in Northeast Asia in the 21st century. A recent survey shows that where to locate an RHQ is influenced by various factors, such as potential market and manufacturing site in the city's hinterland, quality of life, such things as culture, health, safety, education, a well-educated, English-speaking population, reliable air transport, state-of-the-art communications, and an active policy to offer foreign companies generous incentives. The Seoul capital region, which is located at a strategic nodal point advantageous as a springboard for its Northeast Asian hinterland, cannot meet the other conditions mentioned above. To overcome these drawbacks in attracting transnational capital and to create competitiveness as a strategic hub of RHQs in Northeast Asia, it is urgent to initiate a structural reform of the Korean economy, politics, and overall society, to minimize the regulation of FDI, and to provide various incentives for foreign investment. Moreover, we propose the construction of an 'International Business Town' in the Seoul capital region, as a medium to intermediate these strategies and to shape them in a spatial scale. The projected 'International Business Town(IBT)' will be a 'free city' open to international business in which liberal economic activities are guaranteed by special legislation and administration, infrastructures needed for international and improved accessibility to the airport are furnished, and the preference of foreign high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capital, with a spatial program of offering an urban environment preferred by the high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capita, with a spatial program of offering an urban environment preferred by the high-income and managerial class. Furthermore, it can be an excellent way of overcoming the xenophobia that has spread among the Korean population by concentrating foreign businesses and their lifestyles in a specific foreign businesses and their lifestyles in a specific zone. In conclusion, 'International Business Town', in line with other legislative and administrative incentive programs, will function as a driving force to make the Seoul capital regional more competitive as a regional business hub in Northeast Asia.