• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.151-156
• /
• 2010

Monorail, with the cutting edge technology from EMU system, is small to medium sized transportation solution with bus size capacity, and one of key factors is to minimize size and weight. The Wolmi urban tour monorail, which is a center guide type first ever introduced in the world, is also consists minimizing size and weight of the propulsion system (inverter and motor), which generates considerable amount of heat. This study presents a solution of the structure and method of water cooling system of minimize the size and weight of high efficiency propulsion system, and an effective control method for energy saving.

• Journal of architectural history
• /
• v.30 no.1
• /
• pp.19-32
• /
• 2021

The markets are the basic urban facilities for maintaining daily life. Although the urban structure changed rapidly and the population quickly concentrated in the city, the markets remained traditional and backward. To solve various problems in the small excess markets, the Seoul Metropolitan Government had pushed ahead with the market modernization plan since 1967. The purpose of this study is to analyze the process of establishing the market modernization plan and the progress of this project, and to identify the historical meaning of this plan. The results of this study as follows; The market modernization plan aimed to modernize market operation system as well as buildings, and the Government was able to achieve its first goal by enforcing the construction of high-rise buildings, as the markets were newly built with the relatively large scaled fireproof structures. Despite its various limitations, these markets were also regarded as the model of the modern market.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.98-103
• /
• 2003

Recently, to solve the urban transportation problem, the introduction of Light Rail Transit system has been proceeded positively. therefore, development of the Korean standard LRT system in which safety, efficiency and cost effectiveness are emphasized. The Korea Railroad Research institute study on Rubber Tired AGT system of Light Rail Transit to obtain the essential technology and engineering know-how, which leads lower LRT construction cost. In the development procedure, SE(system Engineering) is needed for combination of subsystem and optimum operation effect. This study is focused on the interface of LRT subsystem(Development of the rubber tired LRT, Power supply system, signalling and train control system, Elevated track structure for the rubber tired LRT), a important part of SE, to develop of the driverless LRT system and establish the test and evaluation.

• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.143-152
• /
• 2020

Korean society experienced successive earthquakes exceeding 5.0 magnitude in the past three years resulting in an increasing concern about earthquake stability of urban infrastructures. This study focuses on the significant aspects of earthquake risk assessment for the cut-and-cover underground railway station based on two-dimensional dynamic numerical analysis. Presented are features from a case study performed for the railway station in Seoul, South Korea. The PLAXIS2D was employed for numerical simulation and input of the earthquake ground motion was chosen from Pohang earthquake records (M5.4). The paper shows key aspects of earthquake risk for soil-structure system varying important parameters including embedded depth, supported ground information, and applied seismicity level, and then draws several meaningful conclusions from the analysis results such as seismic risk assessment.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1447-1460
• /
• 2021

Urbanization increases the amount of impervious surface and artificial heat emission, resulting in urban heat island (UHI) effect. Local climate zones (LCZ) are a classification scheme for urban areas considering urban land cover characteristics and the geometry and structure of buildings, which can be used for analyzing urban heat island effect in detail. This study aimed to examine the UHI effect by urban structure in Suwon and Daegu using the LCZ scheme. First, the LCZ maps were generated using Landsat 8 images and convolutional neural network (CNN) deep learning over the two cities. Then, Surface UHI (SUHI), which indicates the land surface temperature (LST) difference between urban and rural areas, was analyzed by LCZ class. The results showed that the overall accuracies of the CNN models for LCZ classification were relatively high 87.9% and 81.7% for Suwon and Daegu, respectively. In general, Daegu had higher LST for all LCZ classes than Suwon. For both cities, LST tended to increase with increasing building density with relatively low building height. For both cities, the intensity of SUHI was very high in summer regardless of LCZ classes and was also relatively high except for a few classes in spring and fall. In winter the SUHI intensity was low, resulting in negative values for many LCZ classes. This implies that UHI is very strong in summer, and some urban areas often are colder than rural areas in winter. The research findings demonstrated the applicability of the LCZ data for SUHI analysis and can provide a basis for establishing timely strategies to respond urban on-going climate change over urban areas.

• Smart Structures and Systems
• /
• v.2 no.3
• /
• pp.275-293
• /
• 2006

For health monitoring purpose usually the structure is instrumented with a large scale and multichannel measurement system. In case of highway bridges, operating vehicle could be utilized to reduce the number of measuring devices. First this paper presents a static damage detection algorithm of using operating vehicle load. The technique has been validated by finite element simulation and simple laboratory test. Next the paper presents an approach of using this technique to field application. Here operating vehicle load data has been used by instrumenting the bridge at single location. This approach gives an upper hand to other sophisticated global damage detection methods since it has the potential of reducing the measuring points and devices. It also avoids the application of artificial loading and interruption of any traffic flow.

• Journal of the Korean Institute of Educational Facilities
• /
• v.15 no.4
• /
• pp.14-25
• /
• 2008

The Purpose of this study is to find out the renewal methods of Dae-jun railway station areas, focusing on the domestic/foreign case studies of the railway station areas and the possibility of the Industry-University-Institute collaboration in this area. As a result, this study shows that the revitalization for the impact area around rail transit station in the aspect of urban spatial structure, mixed land use, type of facilities and exchanging transit system of mass traffic etc, as well as such non-physical aspects as Industry-University-Institute collaboration and administrative planning. It does so by strengthening ties between hardware and software studies of urban planning and University Facilities planning. Finally this study suggested the strategy for the renewal of impact area around the rail transit stations.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.621-626
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Extraction of 3D building information from high resolution satellite imagery is one of the most active research topics. There have been many previous works to extract 3D information based on stereo analysis, including sensor modelling. Practically, it is not easy to obtain stereo high resolution satellite images. On single image performance, most studies applied the roof-bottom points or shadow length extracted manually to sensor models with DEM. It is not suitable to apply these algorithms for dense buildings. We aim to extract 3D building information from a single satellite image in a simple and practical way. To measure as many buildings as possible, in this paper, we suggested a new way to extract building height by triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and decrease the digitizing error and the computation efficiency.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.15-20
• /
• 2005

This is a comparative study where we compare simulation results with model examining the time and direction the fire spreads when it breaks out. Also there is vertical distribution of temperature in carriage where the fire spreads out. This study is about demonstrating how to establish smokeless system in urban vehicle, about its necessity, and about vehicle system restructuring, This study also makes an effort to find more advanced method for efficient fire safety in trains, In existing vehicles, in case of fire, the smoke can't go out when doors are closed and hence it spreads in whole train. Even though the method of using ventilation or exhaust established inside the carriage to throw smoke out is much better than the way of opening end doors in each carriage, this study is trying to do research on second way. Through simulation we see that in second case, even though not as good as the first one, smoke can exit through gates. Even though the first method is better, the second can also be uses to let fire out. We can know that in the first case as the smoke can exit out faster, it provides more safety for people. So this system provides better fire safety condition.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.40-44
• /
• 2007

Light rail vehicle is optimized vehicle system for complex urban circumstance. LRT systems have many merits such as improve accuracy, speediness and safety. There are many LRT systems such as monorail, tram, automated guideway transit, linear induction motor propulsion and so on. These systems have operated in Japan and other advanced countries. In Korea, local government has many projects to apply the advanced LRT system. But there are no standardized specification, performance test specification, construction specification for monorail system, linear induction motor propulsion system, tram in Korea up to now. So, we need to establish of standardized to economical construction and safety. The linear induction motor system has been usually applied in Japan subway and ART(Advanced Rapid Transit) of Canada. In Korea, the linear induction motor system has been adopted for Yongin LRT and currently under construction. This paper covers the contents and technical base for main items of rolling stock, performance standard, carbody structure, bogie, electronic unit and brake equipment in order to implement linear induction motor LRT system according to local conditions.