• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.880-887
• /
• 1998

In order to study heat transfer characteristics of spray cooling for the purpose of uniform and soft cooling of high temperature surface a series of experiments for a hot horizontal copper flat plate was performed by downflow spray water using flat spray nozzle. Cooling curves were mea-sured under the various experimental conditions of flow rates and temperatures of cooling water Surface temperature surface heat fluxes and heat transfer coefficients of horizontal upward-facing flat surface were calculated with cooling curves measured at each radial positions near the cooling surface by TDMA method. Generally heat transfer characteristics for spray cooling is simi-lar to boiling phenomenon of pool boiling. The minimum heat flux(MHF) appear at the surface temperature of about ${\Delta}Tsat=250^{\circ}C$ and the critical heat flux(CHF) appear at about ${\Delta}Tsat=250^{\circ}C$.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.2
• /
• pp.133-139
• /
• 2013

This paper proposes a vision-based indoor localization method for autonomous vehicles. A single upward-facing digital camera was mounted on an autonomous vehicle and used as a vision sensor to identify artificial landmarks and any natural corner features. An interest point detector was used to find the natural features. Using an optical flow detection algorithm, information related to the direction and vehicle translation was defined. This information was used to track the vehicle movements. Random noise related to uneven light disrupted the calculation of the vehicle translation. Thus, to estimate the vehicle translation, a Kalman filter was used to calculate the vehicle position. These algorithms were tested on a vehicle in a real environment. The image processing method could recognize the landmarks precisely, while the Kalman filter algorithm could estimate the vehicle's position accurately. The experimental results confirmed that the proposed approaches can be implemented in practical situations.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.583-586
• /
• 2009

"Hyehwa" an Asiatic lily cultivar was released in 1998 at National Institute of Horticultural and Herbal Science (RDA), Suwon, Korea. The cross was made in 1991 between Asiatic lily "White Bird", a white colored, and "Avignon", an unspotted scarlet red colored. It was preliminarily selected as A93-20 in 1993. Its multiplication, bulbing growth and flowering characteristic tests were conducted from 1994 to 1998. A new cultivar "Hyehwa" flowers in middle of June and grows 98.7 cm in height. Flowers bloom upward-facing, thick orange (RHS, 28A). Year-round flowering is possible by storage of the bulb under $-1.5^{\circ}C$ conditions. For forcing culture, it is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. Botrytis disease control is needed in the wet season.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.537-540
• /
• 2008

'Honghwa' an Asiatic hybrid lily was released in 2001 at National Horticultural Research Institute (NHRI), Rural Development Administration (RDA), and Suwon, Korea. The cross was made in 1994 between Lilium Asiatic 'Avignon', a scarlet red colored, and L. Asiatic 'Connecticut King', bright yellow colored. It was preliminarily selected as 'A96-3' in 1996. Multiplication and bulbing, and characteristic tests were performed from 1997 to 2000. The evaluation of characteristics was made investigated as 'Wongyo C1-31' in 2001 at Suwon. 'Honghwa' flowers at the beginning of June and grows to 111.4 cm stem length. Flowers are upward-facing, unspotted with orange petals. Year-round flowering is possible by storing the bulb at $-1.5^{\circ}C$ conditions. It is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. It is needed to control Botrytis disease during wet season.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.546-549
• /
• 2008

'Yeeun' an Asiatic hybrid lily was released in 2005 at National Horticultural Research Institute (NHRI), Rural Development Administration (RDA), Suwon, Korea. The cross was made in 1994 between Liliium Asiatic 'White Bird' white colored, and Liliium Asiatic 'Cote d'Azur', pink colored variety. It was preliminarily selected as 'A96-5' in 1996. Multiplication and bulbing, and characteristic tests were conducted from 1997 to 2004. The evaluation of characteristics was investigated as 'Wongyo C1-21' in 2004 at Suwon. 'Yeeun' flowers in the end of June and grows 41.6 cm stem length. Flowers are upward-facing, unspotted in petals and yellow green (RHS, 18C). Year-round flowering can be by storing the bulb under $-1.5^{\circ}C$ conditions. For forcing culture, it is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. It is needed to control Botrytis disease in wet season.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.40-43
• /
• 2009

'Glory Pink' an interspecific lily cultivar was released in 2007 at National Horticultural Research Institute (NHRI), Rural Development Administration (RDA), Suwon, Korea. The cross and ovule culture was made between FA interspecific hybrid 'FA97-30' (L. formolongi 'Raizan' ${\times}$ Asiatic lily 'A61'), a red colored cultivar, and Asiatic lily 'Sanzio', light red colored cultivar in 2001. Multiplication and bulbing, and characteristic tests were conducted from 2005 to 2006. Flowering time is around the first of July and the plant height is 131.7 cm. Flowers are upward-facing and red-pink (RHS 63C), with size of 11.3 cm. Petal length and width is 9.1 cm and 4.1 cm, respectively. Leaves are 13.8 cm long, 1.4 cm wide. The throat is dark green, and the stigma is light yellow and pollen is light brown. The weight and size of bulb is 51.1 g and 13.2 cm, respectively. For long-term storage, bulbs can be stored under -1 to -2 for year-round forcing.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.36-39
• /
• 2009

An Asiatic lily cultivar 'Apricot King' was bred in 2007 at National Horticultural Research Institute (NHRI), Rural Development Administration (RDA), Suwon, Korea. The cross was made in 2002 between Asiatic lily 'Orlando', a light orange colored cultivar, and 'Corrida', yellow and pink colored cultivar. Preliminarily selection was done as 'A04-72' in 2004. Multiplication and bulb formation, and characteristic tests were conducted from 2005 to 2006. The evaluation of this line was performed and named as 'Wongyo C1-84' in 2007 that was registered as 'Apricot King' to the registration office of Korea Seed & Variety Service. 'Apricot King' flowers at the end of June and grows average 121.6 cm. It flowers upward-facing, dark green throat and yellow orange (RHS 20A) with the size of flower 17.9 cm. Mean petal length and width is 12.8 cm and 3.7 cm, respectively. Leaves are 16.1 cm long and 2.1 cm wide. It shows light orange stigma and pollen. The weight and size of bulb is 64.2 g and 17.6 cm, respectively. For long-term storage, bulbs can be stored under -1 to $-2^{\circ}C$ for year-round forcing.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.93-99
• /
• 1998

Lately public interest in tree saps of maple and birch trees stimulated to increase demands for sap drink as a natural medical beverage. In order to understand factors affecting tree sap flows, birch species, particularly Betula platyphylla in Mt.Sobaek area, were monitored for daily sap flows according to factors, such as DBH, tapping hole sizes and direction of hole drilling on the trunks. The chemical constituents of saps were also analyzed. The sap flow initiated from the end of March and finished at the end of April. The flow maxima appeared from April 14th to April 26th. Total amounts of the sap flow obtained from birch tree were over 1,800 ml per day per one tree. Sap flows were increased with increasing DBH and tree age. Six milimeter drilled hole resulted in the highest sap flows. Sap flows increased with increases of diameter and height of the trees. Hole drilling to downward side(south-facing) of tree produced almost doubled sap flows than that of upward one(north-facing), while rightside drilling produced same amounts of saps to that of leftside one. Six mm drilling gave the best results not only in maximum flows but also effective hole occluding rates. The saps have in the range of 4.5 to 5.6 pH and l.0 - 2.0% of saccharinity. Sucrose, glucose, fructose and high mineral contents were found in the saps of birch tree. The tree saps could be utilized not only medicinal drink, but also one of the healthy beverages.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.489-496
• /
• 2001

Two perforated plates are used to investigate local heat/mass transfer characteristics in an impingement/effusion cooling system. A naphthalene sublimation method is conducted to determine the local heat/mass transfer coefficients on the upward facing surface of the effusion plate. The two plates are placed in parallel position with gap distances of 1, 2, 4 and 6 times of effusion hole diameter. The effects of hole arrangements of the plates are studied for staggered, square, and hexagonal arrays. The experiments are conducted at Reynolds number of 10,000 based on the effusion hole diameter. The results show that the smaller hole size in the staggered array has the higher transfer coefficients on the stagnation region due to the formation of higher momentum flows through the impingement holes. In the square array, heat/mass transfer on the target plate is more uniform as the number of impingement holes increases. High and uniform heat/mass transfer coefficients are obtained in the hexagonal array.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.346-354
• /
• 2019

Maxillary implants are inserted in the upward direction, meaning that they oppose gravity, and achieving stable support is difficult if the alveolar bone facing the maxillary sinus is thin. Correspondingly, several sinus-lifting procedures conducted with or without bone graft materials have been used to place implants in the posterior area of the maxilla. Even with these procedures available, it has been reported that in about 5% of cases, complications occurred after implantation, including acute and chronic sinusitis, penetration of the sinus by the implant, implant dislocation, oroantral fistula formation, infection, bone graft dislocation, foreign-body reaction, Schneiderian membrane perforation, and ostium plugging by a dislodged bone graft. This review summarizes common maxillary sinus pathologies related to implants and suggests an appropriate management plan for patients requiring dental implantation.