• 융합신호처리학회논문지
• /
• 제9권4호
• /
• pp.280-287
• /
• 2008

간접접촉 심전도(IDC-ECG) 측정에 공통 모드 잡음을 줄이기 위해 오른발 구동(Driven-right-leg) 접지 방법을 적용하고 그 접지의 성능을 조사하였다. 최근에 소개된 간접접촉 심전도 측정 기술은 전극과 인체 피부간의 직접 접촉이 필요하지 않기 때문에, 최근에 필요성이 대두되고 있는 가정에서의 장기간 무구속 심전도 측정에 적합한 측정방법으로서 현재 다양한 응용이 연구되고 있다. 그렇지만 간접접촉 심전도는 전원선에 의한 60Hz 잡음이 기존 측정 방법보다 크게 발생하여, 응용 범위의 확대에 제약 조건이 되고 있다. 본 연구에서는, 기존의 심전도 측정 방법에 사용되는 오른발 구동 접지 방법을 간접접촉 심전도 측정 방법에도 적용하여, 공통모드 잡음 성분을 반전 증폭하여 의자 좌판(seat)에 깔린 전도성 직물을 통해 인체에 feedback하였다. 이로써 피부와 직접 접촉이 없는 간접 접촉 방식의 오른발 구동 접지를 구현하였으며, 이 접지가 안정적으로 동작되고, 오른발 구동 이득이 약 1000정도에서 40dB 수준의 전원 잡음 감소 됨을 확인할 수 있었다. 이 연구의 결과로 간접접촉 심전도의 주파수 대역을 기존의 30Hz이하에서 100Hz 수준까지 높일 수 있게 되었으며, 접지 임피던스를 높일 수 있게 되어 간접접촉 심전도의 응용 분야를 더욱 넓힐 수 있게 되었다.

• Annals of Clinical Neurophysiology
• /
• 제6권2호
• /
• pp.98-102
• /
• 2004

Background: Carpal tunnel syndrome (CTS) is a common condition characterized by entrapment neuropathy of the median nerves. Clinical manifestations are the most important findings for diagnosis and assessment of therapeutic effects. But, objective indicators, such as electrophysiological findings, are also valuable supplementary tools. This study investigated the relationship between clinical grading and sensory nerve conduction velocity (SNCV) of median proper palmar digital nerve (MPPDN) in CTS patients. Method: This study was done on 90 upper limbs of 53 patients with CTS (men: 6, women: 47, age: 26~69 years, mean age; 52 years). Each SNCV of MPPDN was recorded with bar electrode using antidromic method. Each SNCV was compared with clinical grading of CTS. The clinical grades of CTS were designated as follows; group 1 is mild symptoms, 2 is moderate symptoms, and 3 is severe and longstanding symptoms. Result: In thumb, the SNCV of MPPDN was not different significantly between 3 groups (p=0.817). In the index finger, the SNCV was the fastest in the group 1, but faster in group 3 than in group 2 (p=0.001). In the middle and ring fingers, SNCV was decreased in higher clinical grading groups (middle finger: p=0.015, ring finger: p=0.044). Conclusion: SNCV of MPPDN of middle and ring finger correlated with the clinical grading of CTS. SNCV of index finger was the fastest in group 1. But SNCV of thumb did not correlate with the clinical grading of CTS.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 폴리머
• /
• 제30권3호
• /
• pp.207-209
• /
• 2006

ITO 코팅 글라스를 기판으로 사용하고 폴리(페닐렌에테르설폰)(PES)을 감습막으로 하여 정전용량형 습도센서를 제작하였다. 감습막은 PES를 m-cresol에 용해한 후 스핀코팅으로 제조하였고 그 상부에 다공성 Au막을 스퍼터링으로 증착하였다. 상대습도 $20\sim90%$의 범위에서 센서의 용량은 감습막두께에 반비례하였고 1% 미만의 비선형 특성을 나타내었다. 또한 $1.4{\mu}m$ 두께의 샘플에서는 20 kHz에서 1.3%의 히스테리시스와 1.14의 우수한 감도를 얻을 수 있었다.

• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.475-484
• /
• 2020

The prediction of the ground conditions ahead of a tunnel face is very important, especially for tunnel boring machine (TBM) tunneling, because encountering unexpected anomalies during tunnel excavation can cause a considerable loss of time and money. Several prediction techniques, such as BEAM, TSP, and GPR, have been suggested. However, these methods have various shortcomings, such as low accuracy and low resolution. Most studies on electrical resistivity tomography surveys have been conducted using numerical simulation programs, but laboratory experiments were just a few. Furthermore, most studies of scaled model tests on electrical resistivity tomography were conducted only on the ground surface, which is a different environment as compared to that of mechanized tunneling. This study performed a laboratory experimental test to extend and verify a prediction method proposed by Lee et al., which used electrical resistivity tomography to predict the ground conditions ahead of a tunnel face in TBM tunneling environments. The results showed that the modified dipole-dipole array is better than the other arrays in terms of predicting the location and shape of the anomalies ahead of the tunnel face. Having longer upper and lower borehole lengths led to better accuracy of the survey. However, the number and length of boreholes should be properly controlled according to the field environments in practice. Finally, a modified and verified technique to predict the ground conditions ahead of a tunnel face during TBM tunneling is proposed.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.755-765
• /
• 2016

Recently, interest in monitoring health and sports is growing because of the emphasis on wellness, which is accelerating the development and commercialization of smart clothing for biosignal monitoring. In addition to exerciseeffect monitoring clothing that tracks heart rate and respiration, recently developed clothing makes it possible to monitor muscle balance using electromyogram (EMG). The electrode for EMG have to attached to an accurate location in order to obtain high-quality signals in surface EMG measurement. Therefore, this study develops monitoring clothing suitable for different types of human bodies and aims to extract suitable range of EMG according to movements in order to develop self-fitness monitoring clothing based on EMG measurement. This study identified and attached electrodes on six upper muscles and two lower muscles of ten males in their 20s. After selecting six main motions that create a load on muscles, the 8-ch wireless EMG system was used to measure amplitude value, noise, SNR and SNR (dB) in each part and statistical analysis was conducted using SPSS 20.0. As a result, the suitable range for EMG measurement to apply to clothing was identified as four parts in musculus pectoralis major; three parts in muscle rectus abdominis, two parts each in shoulder muscles, backbone erector, biceps brachii, triceps brachii, and musculus biceps femoris; and four part in quadriceps muscle of thigh. This was depicted diagrammatically on clothing, and the EMG-monitoring sensing locations were presented for development of self-fitness monitoring.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.241-245
• /
• 2007

[ $(Ba_{0.9-x}Sr_xCa_{0.10})TiO_3$ ] (x=0.33, 0.36) powders were prepared by sol-gel method. $(Ba,Sr,Ca)TiO_3$(BSCT) thick films, undoped and doped with $MnCO_3$ and $Yb_2O_3(0.1{\sim}0.7mol%)$, were fabricated by the screen printing method on the alumina substrate. The coating and drying procedure was repeated 6-times. The Pt bottom electrode was screen printing method on the alumina substrate. These BSCT thick films were annealed at $1420^{\circ}C$ for 2 hr in atmosphere. The upper electrodes were fabricated by screen printing the Ag paste and then firing at $590^{\circ}C$ for 10 min. And then the structured and dielectric properties as a function of the doping amount of $Yb_2O_3$ were studied. As a result of the TG-DTA, exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All BSCT thick films showed XRD patterns of typical cubic peroveskite structure. The average thickness of BSCT thick films was about $70^{\mu}m$. The curie temperature and the dielectric constant decreased with increasing $Yb_2O_3$ doped content and the relative dielectric constant of the specimen, doped with 0.5 mol% $Yb_2O_3$ at BSCT(54/36/10), showed a best value of 5018 at curie temperature.

• 대한물리치료과학회지
• /
• 제15권3호
• /
• pp.31-41
• /
• 2008

Purpose : The purpose of this study is to examine the muscle activity of shoulder stabilization according to change of supporting base interval between push-up bend and push-up plus position and is to prevent or treat a shoulder injury by the most effective exercise for rehabilitation. Methods : This study analyzed the muscle activity according to change of supporting base interval between push-up bend and push-up plus movement. The participants without neuromuscular disease were 25 students - 12 males and 13 females - all twenty or over and the surface electrode of EMG attached on pectoralis major, triceps long head, middle trapezius, lower trapezius, serratus anterior and latissimus dorsi. The process has practiced 3 sessions of supporting base interval - narrowing interval, two shoulder interval, broad interval - by push-up bend and push-up plus movement. Result : 1. The muscle activity of pectoralis major was significantly increased according to narrow interval of supporting base on push-up plus movement and was significant difference(p<.05). 2. The muscle activity of biceps was significantly increased according to narrow interval of supporting base on push-up bend movement(p<.05). 3. The muscle activity of middle or lower trapezius was a difference according to change of supporting base on push-up bend and push-up plus movement but was not significant difference. 4. The muscle activity of serratus anterior was significantly increased according to broad interval of supporting base on push-up bend movement(p<.05). 5. The muscle activity of latissimus dorsi was significantly increased according to broad interval of supporting base on push-up bend movement(p<.05). Conclusion : These results lead us to the conclusion that push-up bend exercise have the effect of muscle strength of biceps on narrowing interval, of serratus anterior or latissimus dorsi on broad interval and push-up plus exercise have the effect of muscle strength of pectoralis major on narrowing interval of support base.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.132-136
• /
• 1996

A Study is a experiment which is figure out to aptimum discharge cutting condition of the surfaceroughness, electric discharging speed and electro wear ratio with Ton Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine ; 1)Electrode is utilized Cu(coper) and Graphite. 2)Work piece is used the material of carbon steel. The condition of experiment is; 1)Current is varied 0.7(A) to 50(A). 2)Pulse time(Ton) is varied 3($\mu$s) to 240($\mu$s) and also Toff is varied 7($\mu$s) to 20($\mu$s). 3)The time of electric discharging to work piece in each time is 30(min) to 60(min) 4)After the upper side of work piece was measured in radius (5${\mu}{\textrm}{m}$) of syulus analyzed the surface roughness to made the table and graph of Rmax by yielding data. 5)Electro wear ratio is; \circled1Coper was measured cx-machining and post machining but the electronic baiance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume specific gravity and analyzed to made its table and graph on ground the data 6)In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V.R(Automatic Voltage Regulator). 7)The memory scope was sticked to the electric spark machine. 8)In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid, it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging According to above results, the surface roughness by the variation of electrodw and current was analyzed to compare KS(Korea Standards) It was decided the optimum condition of electric discharge cutting through analyzing the effect of electric discharge speed and electro wear ratio.

• Journal of Korean Neurosurgical Society
• /
• 제64권2호
• /
• pp.282-288
• /
• 2021

Objective : Electrooculography (EOG) records eyeball movements as changes in the potential difference between the negatively charged retina and the positively charged cornea. We aimed to investigate whether reliable EOG waveforms can be evoked by electrical stimulation of the oculomotor and abducens nerves during skull base surgery. Methods : We retrospectively reviewed the records of 18 patients who had undergone a skull base tumor surgery using EOG (11 craniotomies and seven endonasal endoscopic surgeries). Stimulation was performed at 5 Hz with a stimulus duration of 200 μs and an intensity of 0.1-5 mA using a concentric bipolar probe. Recording electrodes were placed on the upper (active) and lower (reference) eyelids, and on the outer corners of both eyes; the active electrode was placed on the contralateral side. Results : Reproducibly triggered EOG waveforms were observed in all cases. Electrical stimulation of cranial nerves (CNs) III and VI elicited positive waveforms and negative waveforms, respectively, in the horizontal recording. The median latencies were 3.1 and 0.5 ms for craniotomies and endonasal endoscopic surgeries, respectively (p=0.007). Additionally, the median amplitudes were 33.7 and 46.4 μV for craniotomies and endonasal endoscopic surgeries, respectively (p=0.40). Conclusion : This study showed reliably triggered EOG waveforms with stimulation of CNs III and VI during skull base surgery. The latency was different according to the point of stimulation and thus predictable. As EOG is noninvasive and relatively easy to perform, it can be used to identify the ocular motor nerves during surgeries as an alternative of electromyography.