• Archives of Craniofacial Surgery
• /
• v.24 no.3
• /
• pp.124-128
• /
• 2023

Morbihan disease (MD) is a very rare condition characterized by rosaceous or erythematous lymphedema on the upper two-thirds of the face. A definitive management strategy for MD is lacking, and treatment is challenging. Herein, we present a case of persistent bilateral eyelid edema treated by lymphaticovenular anastomosis (LVA) and lymph node-vein bypass surgery. The patient experienced persistent bilateral eyelid edema. Indocyanine green lymphography was performed, and the diagnosis of bilateral facial lymphedema was confirmed. On the right side, a preauricular lymphatic vessel was anastomosed to a vein. On the left side, lymphostomy on the preauricular lymph node was done, with anastomosis to the transected proximal end of the concomitant vein of the transverse facial artery. Furthermore, a preauricular lymphatic vessel was anastomosed to a vein. Eyelid edema decreased and progressively improved on both sides. The outcome of this case suggests that LVA and lymph node-vein bypass surgery are appropriate for treating persistent eyelid edema related to MD.

• Geomechanics and Engineering
• /
• v.31 no.4
• /
• pp.375-384
• /
• 2022

The variation of the undrained shear strength (c_u) is an important consideration for assessing slope stability in engineering practice. Previous studies focused on the three-dimensional (3D) stability of slopes in normally consolidated clays generally assume the undrained shear strength increases linearly with depth but does not vary in the horizontal direction. To assess the 3D stability of slopes with spatially varying undrained shear strength, the kinematic approach of limit analysis was adopted to obtain the upper bound solution to the stability number based on a modified failure mechanism. Three types failure mechanism: the toe failure, face failure and below-toe failure were considered. A serious of charts was then presented to illustrate the effect of key parameters on the slope stability and failure geometry. It was found that the stability and failure geometry of slopes are significantly influenced by the gradient of c_u in the depth direction. The influence of c_u profile inclination on the slope stability was found to be pronounced when the increasing gradient of c_u in the depth direction is large. Slopes with larger width-to-height ratio B/H are more sensitive to the variation of c_u profile inclination.

• Clinical Endoscopy
• /
• v.55 no.2
• /
• pp.226-233
• /
• 2022

Background/Aims: This study aimed to assess the efficacy of a novel aerosol-exposure protection (AP) mask in preventing coronavirus disease in healthcare professionals during upper gastrointestinal endoscopy and to evaluate its clinical feasibility. Methods: In Study 1, three healthy volunteers volitionally coughed with and without the AP mask in a cleanroom. Microparticles were visualized and counted with a specific measurement system and compared with and without the AP mask. In Study 2, 30 patients underwent endoscopic resection with the AP mask covering the face, and the SpO2 was measured throughout the procedure. Results: In Study 1, the median number of microparticles in volunteers 1, 2, and 3 with and without the AP mask was 8.5 and 110.0, 7.0 and 51.5, and 8.0 and 95.0, respectively (p<0.01). Using the AP mask, microparticles were reduced by approximately 92%. The median distances of microparticle scattering without the AP mask were 60, 0, and 68 in volunteers 1, 2, and 3, respectively. In Study 2, the mean SpO2 was 96.3%, and desaturation occurred in three patients. Conclusion: The AP mask could provide protection from aerosol exposure and can be safely used for endoscopy in clinical practice.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2005

The aim of this study is to establish anatomical dimension of the lip in young population in Korean, using specially designed soft ware with photographic image. We measure 13 anatomical dimensions of lips in 2,229 young people. (917 male, 1312 female, Aged from 18-33 years. Average age 19.7). Statistical analysis of these measurements of large population could offer useful information in facial plastic surgery. The mean measurements are as follows 1. Lengths (male/female) Widths of philtrum: $1.11{\pm}0.19cm/1.02{\pm}0.21cm$ Heights of philtrum: $1.6{\pm}0.24cm/1.47{\pm}0.21cm$ Heights of cupid bow: $0.88{\pm}0.16cm/0.83{\pm}0.16cm$ Height of upper vermilion: $0.74{\pm}0.16cm/0.70{\pm}0.15cm$ Height of lower vermilion: $1.08{\pm}0.17cm/1.02{\pm}0.15cm$ Height of upper lip(Rt.): $1.24{\pm}0.2cm/1.23{\pm}0.2cm$ Height of upper lip(Lt.): $1.24{\pm}0.2cm/1.17{\pm}0.19cm$ Half horizontal length of lip: $2.2{\pm}0.26cm/2.11{\pm}0.2cm$ Horizontal length of lip: $4.41{\pm}0.4cm/4.25{\pm}0.36cm$ Height of lower face: $7.1{\pm}0.58cm/6.52{\pm}0.6cm$ 2. Angles Nasolabial angle: $97.77{\pm}11.97^{\circ}/95.5{\pm}11.34^{\circ}$ Mentolabial angle: $133.88{\pm}14.65^{\circ}/129.27{\pm}13.67^{\circ}$ Angle of Cupid's bow: $111.65{\pm}13.99^{\circ}/116.75{\pm}16.2^{\circ}$ Previous reported photogrammetric measurements was difficult to implement to surgical practice. Because these were printed photographies of the same size. Therefore, in this study, we can measure a lot of objects and items more conveniently and correctly by using proportional program on computer after taking a digital photograph. Consequently, proportional measurements with photogrammetry of lip could be useful and corrective substitute for anthropometrical measuring. These data could be useful reference for preoperative consultation, surgical planning and learning anatomical measurement of lips and adjacent structures.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.4
• /
• pp.379-385
• /
• 2001

Sternocostoclavicular hyperostosis is an uncommon disease, characterized by an inflammatory arthrosteitis of the sternocostoclavicular region. Clinically, it manifests as a painful swelling of the upper anterior chest wall, which is associated with occasional pustulosis palmaris and plantaris. A 48-year-old man had suffered from pain in both shoulders and the upper anterior part of the chest for 6 months. On examination, a venous engorgement in the neck with dilated collateral veins in the upper chest and shoulders was observed. Swelling was noticed in his face, neck and both arms. Radiologically, the clavicles, the sternum and the first ribs were enlarged with complete fusion between them. 99Tc scintigraphy showed increased uptake in the clavicles and the sternum. Selective venography resulted in a bilateral subclavian and brachiocephalic vein occlusion, which resulted from a subclavian vein thrombosis. All the above suggested a sternocostoclavicular hyperostosis. He underwent a vascular graft interposition between the right jugular vein and the left innomianate vein (using 8mm ringed Gore-Tex graft) and a resection of the bilateral medial half of clavicle and 1st rib. Here, we present a case on sternoclavicular hyperostosis with subclavian and brachiocephalic vein thrombosis, and report this case study with a review of the appropriate literature.

• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.79-93
• /
• 1982

The purpose of orthodontic treatment is to achieve normal occlusion and good facial esthetics for individual patients. To produce harmonized facial balance, treatment planning for patient who require orthodontic treatment should include both a hard tissue and soft tissue cephalometric analysis. Author studied to derive the normal standards of soft tissue profile in Koreans by roentgenocephalometric analysis. For this study 12 soft tissue profile landmarks were plotted and 23 linear length, 9 soft tissue thickness, 8 vertical height length, 12 angles of soft tissue profile, and 3 vertical proportion were measured. The subjects consisted of 166 males and 209 females from 7 to 19 years with normal occlusion and acceptable profiles, and were divided into five groups according to age. The obtained results were as follows; 1. From the basis of N-Pog (Nasion-Pogonion) plane, the growth of facial soft tissue in the middle region especially nose area was greater than others facial region. 2. From the basis of G-Pog' (Glabella-soft tissue Pogonion) plane, the values of linear measurement of soft tissue Nasion and Inferior labial sulcus decreased and nose tip grew forward as growing older. 3. The growth of the facial soft tissue thickness was greatest in superior labial sulcus and the thickness of soft tissue nasion gradually became thinner as growing old. 4. The thickness of upper and lower lip was 14.47mm, 14.57mm in adulr male, 12.76mm, 13.78mm in adult female. 5. The soft tissue thickness of the lower lip was thicker than that of upper lip in all age groups and both sexes, 6. The vertical length of the upper and lower lips were 25.04mm, 49.97mm in adult male and 23.50mm, 48.39mm in adult female. 7. By the significant test, there were significant difference between male and female in fifth adult group on all vertical length measurements of lower face. 8. In fifth adult group, the perpendicular distance from LS, LI to Steiner's line and Ricketts' esthetic line were as follow; Steiner line to LS, LI were 7.98mm, 5.84mm in male. Steiner line to LS, LI were 6.71mm, 5.08mm in female. Ricketts' esthetic line to LS, LI were -0.40mm, 1.72mm in male. Ricketts' esthetic line to Ls, LI were -1.38mm 0.65mm in female. 9. In fifth adult group, the facial convexity angle and lower facial component angle were $171.17^{\circ}142.94^{\circ}$ in male and $172.5^{\circ}$, $144.41^{\circ}$ in female.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.368-373
• /
• 2010

The incisors function as instruments for biting and cutting food during mastication. They also support the lips and face and maintain vertical dimension. In addition, they contribute to overall normal arch appearance. They play important role during the articulation of speech and assist in guiding jaw closure. Extraction and space maintenance are the most common treatment for a tooth with poor prognosis. However, in the mixed dentition, extraction of the upper permanent incisors results in many complications, such as resorption of alveolar bone, poor esthetics, pronunciation, and mastication. Considering these various roles of incisors in oral cavity, approach for traumatized incisors, even the ones with poor prognosis, should be considered first prior to simple extraction. The dentist must take into account the age of the patient, growth potential, occlusion, oral hygiene status, economic status and motivation towards dental health in addition to patient compliance. In this case, although the prognosis was predicted to be unfavorable due to short root and mobility, we could save the central incisor using conservative treatment, reposition by orthodontic appliance instead of extraction.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.4 no.1
• /
• pp.23-36
• /
• 1995

The purpose of this artic1e is to compare soft tissue profiles between Korean adults with normal occ1usion and malocclusin and to identify the differences between them. The subjects of this cephalometric study were 40 males with normal occlusion(Group 1), 27 females with normal occlusion(Group 2), 28 adults with Angle's Class II malocclusion(Group 3) and 41 adults with Angle's Class III malocclusion(Group 4). The results of this study were as follows ; 1) People with Angle's Class II malocclusion had tendency to have more labial tipping of lower teeth than people with normal occ1usion. Through NOA angle measurement, it was determined that people with Angle's Class II malocclusion had more protruding midface than people with normal occlusion and people with Angle's Class III malocclusion had retruding midface. 2) Through Powell's esthetic triangle analysis, it was determined that people with Angle's Class II malocclusion had retruding chin and protruding nose. 3) No significant differences between people with normal occlusion and maloclusion could be identified by measuring soft tissue profile angle basis of S-NS plane. 4) There were significant differences between groups with normal occlusion and malocclusion by measuring Facial convexity angle(Significance level 99%). 5) By measuring the distance between each landmark basis of N-Pog plane, People with Angle's Class II malocclusion were identified as having more protruding midface, but there were no significant differences between people with normal occlusion and Angle's Class III malocclusion. 6) By measuring the vertical dimension of the face, it was determined that the lower facial height was higher than the upper facial height in all groups, particularly in group with Angle's Class III malocclusion. 7) By measuring the lips basis of E-line and S-line, it was determined that people with Angle's Class III malocclusion had more, protruding lower lips than people with normal occlusion, while people with normal occlusion, while people with Angle's Class II malocclusion had more protruding upper lips. By measuring the distance between the superior sulcus and inferior sulcus basis of H-line, people with Angle's Class II malocclusion had thicker upper lips than the other's.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.121-129
• /
• 2004

The purpose of this study was to photoelastically visualize 4he distribution of fortes transmitted to the alveolus and surrounding structures using three different types of headgear for the distal movement of the upper molars. A photoelastic maxillary model was made and three different directional forces applied, which were high-pull, straight-pull, and cervical-pull. Stress distribution was recorded through circular polariscope, and two-dimensional photoelastic stress analysis was performed according to isochromatic fringe characteristics. The results were as follows: 1. In the case of high-pull headgear bodily movement occurred in the medium- length outer bow, stress distribution in the apical region was 1st molar, 2nd premolar, lst premolar in sequence and there was no apparent difference. 2. In the case of straight-pull headgear, bodily movement occurred in the long outer bow and stress distribution in the apical region was heavy in the 1st molar, 2nd premolar, 1st premolar in sequence. But. there were no apparent differences according to the length of the outer bow. 3. In the case of cervical- pull headgear, bodily movement also occulted in 4he long outer bow, and apical stress of the premolar region was heaviest among other cases and apical stress of the 2nd premolar was heaviest in the short outer bow. In clinical situations, to achieve bodily movement of the upper 1st molars without modifying outer bow height, applying an outer bow length as long as the inner bow length in high-pull headgear and applying an outer bow length longer than the inner bow length in straight-pull, cervical-pull headgear are recommended.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.6
• /
• pp.417-427
• /
• 2010

In the ease that a new cross tunnel is constructed under the existing tunnel, development of a longitudinal arching would be influenced by the existing tunnel. But it is not enough to investigate. Especially, the influence of the structure loads on the ground surface on the new tunnel, which the under-passes existing tunnel has been rarely studied. This study, therefore, aimed to clarify the effect of the existing tunnel and the structure on the ground surface on the development of a longitudinal ground arching during the excavation of a cross tunnel under the existing tunnel. Two-dimensional model tests were carried out in the test box, whose dimension was 30 cm (wide) ${\times}$ 113 cm (deep) ${\times}$ 87 cm (high). The existing tunnel was made of S21 steel tube in 16 cm diameter and 1 mm thickness. The ground surface load was 4.9 kPa and was loaded on the model structure in the size with 30 cm width ${\times}$ 16 cm height. New tunnel was excavated in 250 mm height by a bench cut method. As results, the longitudinal arching would be developed but it was severely influenced by not only the existing upper tunnel but also the ground surface load. The influence of the ground surface load on the development of longitudinal ground arching around a new tunnel showed the highest value when the tunnel face located direct under the surface load.