• 제목/요약/키워드: Upflow anaerobic sludge blanket

검색결과 58건 처리시간 0.021초

Anaerobic Ammonium Oxidation Process in an Upflow Anaerobic Sludge Blanket Reactor with Granular Sludge Selected from an Anaerobic Digestor

  • Tran, Hung-Thuan;Park, Young-Joo;Cho, Mi-Kyeoung;Kim, Dong-Jin;Ahn, Dae-Hee
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제11권3호
    • /
    • pp.199-204
    • /
    • 2006
  • The purpose of this work was to evaluate the development of the anammox process by the use of granular sludge selected from a digestion reactor as a potential seed source in a lab-scale UASB (upflow anaerobic sludge blanket) reactor system. The reactor was operated for approximately 11 months and was fed by synthetic wastewater. After 200 days of feeding with $NH_4^+\;and\;NO_2^-$ as the main substrates, the biomass showed steady signs of ammonium consumption, resulting in over 60% of ammonium nitrogen removal. This report aims to present the results and to more closely examine what occurs after the onset of anammox activity, while the previous work described the start-up experiment and the presence of anammox bacteria in the enriched community using the fluorescence in situ hybridization (FISH) technique. By the last month of operation, the consumed $NO_2^--N/NH_4^+-N$ ratio in the UASB reactor was close to 1.32, the stoichiometric ratio of the anammox reaction. The obtained results from the influent-shutdown test suggested that nitrite concentration would be one key parameter that promotes the anammox reaction during the start-up enrichment of anammox bacteria from granular sludge. During the study period, the sludge color gradually changed from black to red-brownish.

상향류 혐기성 슬러지 블랭킷 반응조를 이용한 침출수 처리시 입상 활성탄 및 입상슬러지 첨가의 영향 (Effect of the Addition of Granular Activated Carbon and Granular Sludge on the Performance of Upflow Anaerobic Sludge Blanket Reactors for Treating Leachate)

  • 이채영
    • 유기물자원화
    • /
    • 제16권4호
    • /
    • pp.91-97
    • /
    • 2008
  • 본 연구에서는 상향류 혐기성 블랭킷 반응조를 이용한 침출수 처리시 입상활성탄과 입상슬러지의 첨가가 반응조의 성능에 미치는 영향을 평가하였다. Control 반응조의 경우 식종물질로 혐기성 소화슬러지를 이용하였으며 GAC 반응조와 Granule 반응조의 경우 Control 반응조와 동일 방식으로 식종하였으며 단지 GAC와 입상슬러지를 소량 첨가하였다. Granule 반응조가 초기 운전기간 동안 가장 짧은 순응기간을 보였으며 GAC 반응조의 경우에도 운전초기에 만족할 만한 성능을 보였다. 그러나 활성탄의 흡착능이 소모됨에 따라 유출수 COD 농도가 점차 증가하는 경향을 보였다. 반응조가 안정화된 후 GAC 반응조가 다른 반응조에 비해 약간 우수한 결과를 보였으며 모든 반응조의 COD 제거율은 수리학적 체류시간 1일에서 90% 이상을 나타내었다. 특히 GAC 반응조의 경우 COD 제거율의 변화 없이 유기물 부하 $4.0{\sim}8.2kg\;COD/m^3.d$에서 95%를 유지하였다. 소량의 입상슬러지 첨가에 의해 초기 운전기간을 단축시킬 수 있었으며 처리효율은 GAC 첨가에 의해 향상되는 것으로 나타났다.

  • PDF

매립지 침출수 처리의 고율 혐기성 처리 (High-rate Anaerobic Treatment of Landfill Leachate)

  • 이채영;신항식
    • 유기물자원화
    • /
    • 제15권2호
    • /
    • pp.136-146
    • /
    • 2007
  • 상향류 혐기성 블랭킷 반응조를 이용한 매립지 침출수 처리시 입상슬러지 첨가 유무에 상관없이 성공적인 처리가 가능하였다. 입상슬러지의 첨가는 초기 운전기간를 현저히 단축할 수 있었다. 수리학적 체류시간 1일과 $4-8kgCOD/m^3.d$ 의 유기물 부하율에서 Control 반응조와 Granule 반응조의 COD 제거율은 90% 이상을 유지하였다. 실험기간 동안 입상슬러지 첨가 유무에 상관없이 슬러지 표면과 반응조 벽면에 무기 침전물이 축적되었다. 비메탄 활성도는 미생물의 기질에 대한 적응도와 유기물 부하량이 증가함에 따라 증가하였다. Granule 반응조의 최대 비메탄 활성도의 값은 $0.57gCOD/g{\cdot}VSS{\cdot}.d$로 나타났다. 비록 본 연구에서는 과도한 무기물 축적으로 인한 비메탄 활성도의 저감은 발생하지 않았으나 무기물의 제거를 위하여 유입수의 전처리 공정이 필요할 것으로 판단된다.

  • PDF

Isolation of Hydrogen-producing Bacteria from Granular Sludge of an Upflow Anaerobic-Sludge Blanket Reactor

  • Oh, You-Kwan;Park, Mi-So;Seol, Eun-Hee;Lee, Sang-Joon;Park, Sunghoon
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제8권1호
    • /
    • pp.54-57
    • /
    • 2003
  • H$_2$-producing bacteria were isolated from anaerobic granular sludge. Out of 72 colonies (36 grown under aerobic conditions and 36 under anaerobic conditions) arbitrarily chosen from the agar plate cultures of a Suspended sludge, 34 colonies (15 under aerobic conditions and 19 under anaerobic conditions) produced H2 under anaerobic conditions. Based on various biochemical tests and microscopic observations, they were classified into 13 groups and tentatively identified as follows: From aerobic isolates, Aeromonar spp. (7 strains), Pseudomonas spp. (3 strains), and Vibrio spp. (5 strains); from anaerobic isolates, Actinomyces spp. (11 Strains), Clostridium 5pp. (7 strains). and Porphyromonas sp. When glucose was used as the carbon substrate, all isolates showed a similar cell density and a H$_2$ production yield in the batch cultivations after 12 h (2.24-2.74 OD at 600 nm and 1.02-1.22 mol H$_2$/mol glucose, respectively). The major fermentation by-products were ethanol and acetate for the aerobic isolates, and ethanol, acetate and propionate for the anaerobic isolates. This study demonstrated that several H$_2$ producers in an anaerobic granular sludge exist En large proportions and their performance in terms of H$_2$ production is quite similar.

황산염이 UASB 반응조에서 혐기성 분해 반응에 미치는 영향 (The Effects of Sulfate on Anaerobic Treatment with UASB)

  • 정승현;양병수
    • 환경위생공학
    • /
    • 제13권2호
    • /
    • pp.47-56
    • /
    • 1998
  • Effects of sulfate on the anaerobic substrate utilization were evaluated using UASB (Upflow Anaerobic Sludge Blanket) reactor. Effect of sulfate on the organic removal rate was dependent on the relative amount of microorganisms in the reactor, the operational condition, and the characteristics of sludge. When the sulfate shock was applied to 0.0 - 3.0g SO$_{4}$$^{2-}$/d, more than 95% of COD removal efficiency was achieved. Therefore, if F/M ratio was kept to low sufficiently with recirculation, it is shown that operation of the reactor was not affected significantly, though sulfate shock load was doubled compared to the normal operation. Provided that it is shocked by high strength of sulfate or temporary shock load is applied frequently the efficiency of reactor may be disadvantageous as well as the wash-out of sludge will be increased by decreasing the size to the accumulated frequency of granular sludge and the size with maximum frequency.

  • PDF

Syntrophic Propionate Degradation Response to Temperature Decrease and Microbial Community Shift in an UASB Reactor

  • Ban, Qiaoying;Li, Jianzheng;Zhang, Liguo;Jha, Ajay Kumar;Zhang, Yupeng;Ai, Binling
    • Journal of Microbiology and Biotechnology
    • /
    • 제23권3호
    • /
    • pp.382-389
    • /
    • 2013
  • Propionate is an important intermediate product during the methane fermentation of organic matter, and its degradation is crucial for maintaining the performance of an anaerobic digester. In order to understand the effect of temperature on propionate degradation, an upflow anaerobic sludge blanket (UASB) reactor with synthetic wastewater containing propionate as a sole carbon source was introduced. Under the hydraulic retention time (HRT) of 10 h and influent propionate of 2,000 mg/l condition, propionate removal was above 94% at 30-$35^{\circ}C$, whereas propionate conversion was inhibited when temperature was suddenly decreased stepwise from $30^{\circ}C$ to $25^{\circ}C$, to $20^{\circ}C$, and then to $18^{\circ}C$. After a long-term operation, the propionate removal at $25^{\circ}C$ resumed to the value at 30- $35^{\circ}C$, whereas that at $20^{\circ}C$ and $18^{\circ}C$ was still lower than the value at $35^{\circ}C$ by 8.1% and 20.7%, respectively. Microbial community composition analysis showed that Syntrophobacter and Pelotomaculum were the major propionate-oxidizing bacteria (POB), and most POB had not changed with temperature decrease in the UASB. However, two POB were enriched at $18^{\circ}C$, indicating they were low temperature tolerant. Methanosaeta and Methanospirillum were the dominant methanogens in this UASB and remained constant during temperature decrease. Although the POB and methanogenic composition hardly changed with temperature decrease, the specific $COD_{Pro}$ removal rate of anaerobic sludge (SCRR) was reduced by 21.4%-46.4% compared with the control ($35^{\circ}C$) in this system.

UASB를 이용한 음폐수의 Biogas 자원화 (Biogas Resource from Foodwaste Leachate Using UASB(Upflow Anaerobic Sludge Blanket))

  • 민부기;이창현;김재용
    • 공업화학
    • /
    • 제23권1호
    • /
    • pp.28-34
    • /
    • 2012
  • 본 연구에서는 UASB 반응조를 이용하여 음폐수 탈리액을 원료로 하여 중온소화($35{\pm}0.5^{\circ}C$)와 고온소화($55{\pm}0.5^{\circ}C$)법을 통한 운전을 실시하였다. 20일 동안은 중온소화로 운전을 하면서 5일 간격으로 유출수 재순환 비를 단계적으로 변화시켰다. 고온소화 역시 중온소화와 마찬가지 조건으로 운전을 실시하였다. 실험결과 중온소화 시 유기물제거율은 90% 이상, 메탄수율은 약 66~70%로 나타났다. 고온소화 시 유기물제거율은 80% 이상, 메탄수율은 약 62~68%로 나타났다. 또한, 유출수 반송을 3Q 이상으로 반송하여 운전할 경우 경제적이며 안정적인 운전을 할 수 있었다.

Color Removal of Real Textile Wastewater by Sequential Anaerobic and Aerobic Reactors

  • Oh You-Kwan;Kim Yu-Jin;Ahn Yeonghee;Song Seung-Koo;Park Sunghoon
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제9권5호
    • /
    • pp.419-422
    • /
    • 2004
  • Textile wastewater from the Pusan Dyeing Industrial Complex (PDIC) was treated utilizing a two-stage continuous system, composed of an upflow anaerobic sludge blanket reactor and an activated Sludge reactor. The effects of color and organic leading rates were studied by varying the hydraulic retention time and influent glucose concentration. The maximum color load to Satisfy the legal discharge limit of color intensity in Korea (400 ADMI, unit of the American Dye Manufacturers Institute) was estimated to be 2,700 $ADMI{\cdot}L^{-1}\;day^{-1}$. This study Indicates that the two-stage anaerobic/aerobic reaction system is potentially useful in the treatment of textile wastewater.

Solid household waste characterization and fresh leachate treatment: Case of Kasba Tadla city, Morocco

  • Benyoucef, Fatima;Makan, Abdelhadi;El Ghmari, Abderrahman;Ouatmane, Aziz
    • Environmental Engineering Research
    • /
    • 제20권4호
    • /
    • pp.363-369
    • /
    • 2015
  • This study aims to characterize solid household waste and to present physicochemical characteristics of fresh leachate before landfilling in Kasba Tadla city, Morocco. Obtained results show that household waste produced in 2013 were about 11,787 tons, or 0.27 tons/capita/year. These wastes were composed essentially of organic materials (74%), paper (8%), plastics (9%), metals (1%), and glass (0.5%). However, monthly produced leachate ranges from a maximum of $130.92m^3$ during summer and a minimum of $21.88m^3$ in winter. Moreover, leachate treatment using Upflow Anaerobic Sludge Blanket technique was accompanied by a decrease in electrical conductivity, certainly related to leachate-sediment chemical exchanges. Otherwise, the same acidity reduction phenomenon occurs when pH value increased from 4.49 to 6.17 after 24 hours, confirming the system response since the early stages of treatment. In addition, temporal evolution of the treatment efficiency in terms of COD highlighted a very important reduction which reached 94% after 5 days with an average temperature of $25^{\circ}C$.

Comparison of response surface methods for the optimization of an upflow anaerobic sludge blanket for the treatment of slaughterhouse wastewater

  • Chollom, Martha Noro;Rathilal, Sudesh;Swalaha, Feroz Mohammed;Bakare, Babatunde Femi;Tetteh, Emmanuel Kweinor
    • Environmental Engineering Research
    • /
    • 제25권1호
    • /
    • pp.114-122
    • /
    • 2020
  • This study was aimed at using the Central Composite Design (CCD) and Box-Behnken Design (BBD) to compare the efficiency and to elucidate the main interacting parameters in the upflow anaerobic sludge blanket (UASB) reactor, namely: Organic Loading Rate (OLR), Hydraulic Retention Times (HRT) and pH at a constant temperature of 35℃. Optimum HRT (15 h), OLR (3.5 kg.m-3.d-1) and pH (7) resulted in biogas production of 5,800 mL/d and COD removal of 80.8%. BBD produced a higher desirability efficiency of 94% as compared to the CCD which was 92%. The regression quadratic models developed with high R2 values of 0.961 and 0.978 for both CCD and BBD, respectively, demonstrated that the interaction models could be used to pilot the design space. BBD model developed was more reliable with a higher prediction of biogas production (5,955.4 ± 225.3 mL/d) and COD removal (81.5 ± 1.014%), much close to the experimental results at a 95% confidence level. CCD model predictions was greater in terms of COD removal (82.6 ± 1.06% > 80.8%) and biogas production (4,636.31 mL/d ± 439.81 < 5,800 mL/d) which was less than the experimental results. Therefore, RSM can be adapted for optimizing various wastewater treatment processes.