In this study, the mass production process was simulated using a 1m3 batcher plant to evaluate the application of high-strength fire resistance concrete. The strength ranges of concrete were set to 50, 60, 70, and 80 MPa, and each concrete mix proportions was selected through preliminary experiments in the laboratory. For the selected concrete mix proportions, after the mixer load value was stabilized in the batcher plant, the slump flow and air content of the fresh concrete were evaluated, and the compressive strength was evaluated up to 56 days. As a result of the experiment, both the slump flow and air content of the fresh concrete satisfied the target performance, and in the case of compressive strength, 50 and 60 MPa satisfied the target performance at 28 days and 70 and 80 MPa at 56 days.
Effects of silane modifier, bis(triethoxysilylpropyl) tetrasulfide (TESPT(S4)) and bis(triethoxysilylpropyl) disulfide (TESPD(S2)), on silica filled compound were investigated upon processability, dynamic, mechanical, heat build-up, blowout properties, and silica dispersion in natural rubber (NR). The temperature of the S2 treated silica compound generated higher than that of the S4 treated compound during internal mixer compounding. The shear viscosity of the S2 compound exhibited lower than that of the S4 compound and the viscosity measured in dynamic mode was close to each other. The elongation modulus of the S2 compound exhibited lower than that of the S4; however, the tear resistance strength of the S2 compound exhibited higher than that of the S4 compound. The loss tan$\delta$ values of the S2 compound exhibited higher than those of the S4 at room temperature. The augmentation of the test temperature lowered the tan$\delta$ values of each compound, which results in close tan$\delta$ values to each other at $100^{\circ}C$. The S2 compound deformed less than the S4 compound, and the blowout time of each compound was close to each other. The S2 compound generated more heat build-up than the S4 compound. The abrasion loss of the S2 compound was less than that of the S4 compound. The size of the silica agglomerate reduced on both S4 and S2 compounds upon vulcanization. The addition of the bifunctional silanes (S2 and S4) on silica filled NR compound improved the processability of each compound and their effects were more significant on the S2 compound than the S4 compound. After vulcanization the silica agglomerate size of each compound reduced compared with before vulcanization.
본 논문에서는 차세대 항공 데이터 통신에 사용되는 VDR(VHF Data Radio)의 물리계층을 국제규격에 만족하도록 설계하였다. VDR의 주파수 대역은 117.975~137MHz이고, CSMA(Carrier Sense Multiple Access) 다중 접속방식, D8PSK(Differential Eight Phase Shift Keyed), 25kHz의 채널 대역폭을 사용한다. VDR의 성능 요구 조건인 인접 채널 분리, 수신감도, 혼변조, 수신기의 동작영역, 송신기의 선형성, 불요 방사 전력을 선형 및 비선형 시뮬레이션을 통해 분석 하고, 제작을 위한 방향을 제시하였다. 설계 결과 송신부는 Po1dB보다 5dB 낮은 점에서 사용해야하고, 중간 주파수를 45MHz 선정하여 스퓨리어스 발생을 억제해야한다. 수신부는 잡음지수 4.5dB, Es/No 27.52dB로 설계 되었고, 혼변조 성분을 최소화하기위해 저 잡음 증폭기의 IIP3를 +10dBm 이상을 사용하고, 혼합기의 절연특성이 30dB이상이 되어야한다.
The goals of this study are to develop a sprayable strain-hardening cement composite (SHCC) and to investigate the potential of the sprayable SHCC for packing the joint between existing R/C building and seismic retrofit elements. This paper provides the procedure for the development of a sprayable SHCC, test results of fresh properties required to a sprayable SHCC, and mock-up test results of developed sprayable SHCC. Control mixture of polyvinyl alcohol (PVA) fiber-reinforced SHCC (PVA-SHCC) was predetermined based on available research results. The pumpability and sprayability of the SHCC mixture were depended on the fluid property of fresh SHCC mixture. In this study, the effects of admixtures such as AE agent and fly ash on the rheological and rebound properties of control SHCC mixture were investigated to determine a sprayable SHCC mixture. Flow values and air content during shotcreting procedure of sprayable SHCC were also evaluated. The results show that flow or flowability and amount of air of three SHCC mixtures decreased almost linearly according to shotcreting procedure from mixer to nozzle. And the pumpability and sprayability of mixture with AE agent and low amounts of fly ash were superior to the those of SHCC. Mock-up test result show that developed sprayable SHCC indicates much improved workability and shotcrete construction period than conventional method(nonshrinkage mortar).
본 논문에서는 트리플 베이스라인 인터페로미터(tripple baseline interferometer) 방향탐지 장치에 적용할 수 있는 VHF 대역 다채널 위상 판별기(phase discriminator)를 제안하였다. 방향탐지 장치에서 출력되는 IF(Intermediate Frequency) 신호들 간의 위상차를 동시에 측정하기 위해 위상 판별기를 다채널의 병렬 구조로 설계하였고, 위상 판별기의 위상 코릴레이터(phase correlator)는 소자 수를 줄이기 위해 I, Q 믹서 방식으로 구현하였다. 그리고 RF 소자의 위상 정합 불균형에 따른 위상 판별기의 오차를 보상하기 위해 디지털 LUT(Look Up Table)를 적용하였다. 제작된 VHF 대역 다채널 위상 판별기는 측정 결과, 30 dB SNR 조건에서 2도 RMS(Root Mean Square) 수준의 위상 측정 정확도를 보이며, 상용 위상 판별기보다 우수한 정확도를 갖는다.
석탄화력 발전소에서 발생하는 수백만 톤의 석탄회는 콘크리트 혼화재 및 건축자재로 재활용이 가능함에도 불구하고 과다한 미연탄소 함량으로 인해 대부분 회사장(Ash Pond) 되는데, 이로 인해 환경오염유발, 회사장 포화에 따른 발전소의 수명 감소, 그리고 재활용 가능한 자원의 낭비와 같은 문제가 발생한다. 본 연구는 석탄회 내의 미연탄소분을 분리하여 미연탄소분 함량이 낮은 고순도 석탄회를 회수하기 위해 직류관 믹서(In-Line Mixer) 발생기키는 역류형 컬럼부선기를 이용하였다. 이때 입자 표면에 소수성의 특성을 강화시키는 포스제의 증가에 따른 석탄회와 미연탄소 입자의 분리 특성을 분석하였다. 석탕회 톤당 8ι의 포수제를 사용한 역류형 컬럼 부선기를 이용하여 미연탄소분 함유량이 7%인 석탄회를 분리 실험한 결과 미연탄소분 함유량 0.5%인 고순도 석탄회를 88.2% 회수하였다. 그리고 질량 평균입경이 21.2$mu extrm{m}$인 석탄회를 분리 실험하여 입도를 분석한 결과 분리 정도에 따라 입도는 뚜렷하게 구별되어 나타났는데, 분리효율이 증가할수록 정제 석탄회의 경우 입도는 조대해져 입도 분포의 양극화 현상이 뚜렷하게 나타났다. 포수제의 투입량이 증대함에 따라 미연탄소 입자의 계면에 소수성이 강화되어 분리 특성이 향상되었으며, 이때 회수한 고순도 석탄회의 입도는 미세화 되는 경향이 나타났다.
KAERI의 PRIDE 시설에서 공학규모의 전해환원용 원료물질인 $UO_2$ 다공성펠렛 제조를 위해 공정과 장치를 최적화시킨 내용을 다루었다. $UO_2$ 분말과 별도로 attrition 밀링된 대용산화물 분말을 출발분말로, 정밀 칭량을 통해 사용후핵연료 조성을 모사하였다(Simfuel). Simfuel 분말은 각각 tumbling mixer로 혼합하여 균질화 하고, rotary press로 성형하여 furnace를 이용해 소결하였다. $4%\;H_2-Ar$ 분위기에서 $1450^{\circ}C$ 24시간 고온 열처리하여 제조된 소결펠렛은 $6.89g{\cdot}cm^{-3}$의 벌크밀도를 가지며 이는 후속 전해환원 공정의 요구에 부합한다. 소결된 다공성펠렛의 미세구조 관찰을 통해 다공성 기지상과 함께 산화/금속 석출물이 관찰되어 사용후핵연료의 상이 모사됨을 확인하였다. 본 결과는 향후 공학규모 이상의 파이로 연구를 위한 $UO_2$ 다공성펠렛 제조에 중요한 기초자료로 활용 될 것이다.
망간단괴 매트상 침출액 조성으로 제조 된 모의 용액(Cu 10.5 g/L, Co 2.0 g/L, Ni 15.0 g/L, Fe 0.2 g/L)으로부터 용매추출-전해채취 연속공정을 통해 구리를 분리-회수하기 위하여 규모 확대용 용매추출장치인 6단 혼합-침강기(mixer-settler : 추출 4단, 탈거 2단)와 전해조를 이용하였다. 용매추출의 경우 추출제로는 40%(v/v)의 LIX 84I, 탈거용액은 전해폐액(Cu 35.0 g/L, $H_2SO_4$ 180 g/L)을 사용하였으며 추출단과 탈거단의 O/A 비는 각각 1/1과 1.5/1 이었다. 용매추출공정의 구리의 추출율과 탈거율은 각각 96.7%와 91.0%이었으며 탈거액(전해액)의 구리, 니켈, 코발트 그리고 철의 농도는 각각 50~51 g/L, 25 ppm, 5 ppm 그리고 3 ppm 이었다. 전해채취공정은 $1.50A/dm^2$의 전류밀도에서 98.9%의 전류효율을 나타내었으며, 99.833% 순도의 금속 구리를 얻었다.
본 논문에서는 광대역 신호를 수신할 수 있는 혼성변환 방식의 RF 전단부 구조를 제안하고 이의 타당성을 설계, 제작 및 실험을 통하여 검증하였다 제안한 혼성변환 방식의 RF 전단부는 상향변환 블럭을 적용하여 광대역 수신시 고조파 변환 및 영상신호 변환에 의해 발생되는 기존 RF 전단부의 성능 저하 문제를 개선했으며, 부고조파 혼합기에서 대역폭이 증가되는 원리를 적용하여 광대역 LO 신호의 구현을 위해 여러개의 국부발진기를 사용하는 기존 RF 전단부 구조들의 복잡도 문제를 개선하였다 제작한 회로들은 실험 결과 도출한 설계 규격을 만족하였고 RF 전단부 또한 80 dB 이상의 이득, 60 dB 이하의 잡음지수, 최소 이득조건에서 -50 dBm 이상의 IIP3 특성으로 목표 규격을 만족하였다.
본 논문은 밀리미터파 대역 무선통신 시스템 송신부의 응용을 위해 CPW 구조를 이용하여 V-band용 상향 주파수 혼합기와 2단 구동증폭기를 설계$\cdot$제작하였다. 능동소자는 본 연구실에서 제작한 $0.1{\mu}m$ 게이트 GaAs Pseudomorphic HEMTs(PHEMTs)를 사용하였으며 입$\cdot$출력단은 CPW를 사용해 정합 회로를 설계하였다. 제작된 상향 주파수 혼합기는 LO power 5.4 dBm, 2.4 GHz IF 신호를 -10.25 dBm으로 입력하였을 때 Conversion Loss 1.25 dB, LO-to-RF Isolation은 58 GHz에서 13.2 dB의 특성을 나타내었다 2단 구동 증폭기는 측정결과 60 GHz에서 S21 이득 13 dB, $58\;GHz\;\~\;64\;GHz$ 대역에서 S21 이득 12 dB 이상을 유지하는 광대역 특성을 얻었고 증폭기의 Pl dB는 3.8 dBm, 최대 출력전력은 6.5 dBm의 특성을 얻었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.