• 생명과학회지
• /
• 제9권3호
• /
• pp.241-247
• /
• 1999

Antibiotics have been routinely used to control the disease of farm-raised animals in the aquaculture facilities without any criterion based on a pharmacokinetic study. This lack of information on the effective usage of antibiotics would have brought the farmers to use excessive and/or less dosages, causing the advent of drug-resistant bacteria as well as economic loss and possible contamination of the local farming area. Until recently, few studies on a detailed manual for the antibiotic usage including chemotherapy procedure, dosage, and treatment schedule of the aquatic antibiotics have been conducted throughout the world. To the worse, there is no available criterion for optimal usage of aquatic antibiotics to control diseases in aquatic farms in this country because every country has its own aquacultural system. Therefore, based on the previous studies on the usage of the various antibiotics, our studies are to focus on the development of optimal method for the detection of various antibiotics on the fate of antibiotics applied to the fish, including absorption, circulation, and secretion physiology. Pharmacokinetic study were to sep up the optimal detective condition against residual antibiotics of fish by HPLC. The grinding pefloxacin for 15 min is most effective in dissolution test and pharmacokinetic parameters. Pharmacokinetic parameters were satisfactory for 15 min-grinding products and they can be explained as one-compartment model.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.41-46
• /
• 2008

Generally optical components are fabricated by grinding, lapping and polishing processes. Those processes take long time to obtain optical high surface quality. In the case of large optical components, the on-machine measurement is strongly recommended because the workpiece is fragile and difficult to set up for fabricating and measuring. This paper is concerned about a swing-arm mechanism which can be used for on-machine measurement of a surface profile with a sensing probe end-effect, and also for grinding or lapping the surface with a corresponding tool. The measuring accuracy and uncertainty using a swing arm type profilometer have been studied. The experimental results show that this method is useful specially in lapping process with the accuracy of $5{\mu}m$. Those inspection data are provided for correcting the residual figuring error in next processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 2001

A cone-shaped active magnetic bearing spindle system for high speed internal grinding is designed and tested. The cone-shaped AMB system consists of only 4 couples of magnet, it can be smaller and lighter than conventional radial-axial-type AMB system. In this paper, the cone-shaped electromagnets are designed by magnetic circuit theory, and de-coupled direct feedback PID controller is applied to control the coupled magnetic bearings. The designed cone-shaped AMB spindle system is built and constructed with a digital control system, and tested its stbility and dynamic performances. As the results of the tests, this spindle runs up to 40,000 rpm with about 5 ${\mu}{\textrm}{m}$ of runout, and the AMB system provides high damping ratio eliminating overshoot and resonance speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.229-232
• /
• 1997

In this paper, the case study of reducing rotational errors is done for a grinding spindle with an active magnetic bearing system. The rotational errors acting on the magnetic bearing spindle are due to mass unbalance of rotor, runout, grinding excitation and unmodeled nonlinear dynamics of electromagnets. For the most case, the electrical runout of sensor target is big even in well-finished surface; this runout can cause a rotation error amplified by feedback control system. The adaptive feedforward method based on LMS algorithm is discussed to compensate this kind of runout effects, and investigated its effectiveness by numerical simulation and experimental analysis. The rotor orbit size in both bearings is reduced about to 5 pin due to lX rejection by feedforward control up to 50,000 rpm.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.64-75
• /
• 1991

The design of structures of modern industry has developed to satisfy stringent service, realiability and safety. Up to now, geometric profile which means surface foughness and dimension accuracy is mainly treated in manufacturing process of work surface. But it is inevitable to evaluate changes of surface geometry as well as the nature of alterations in surface layers because surface of workpiece changes as a result of phase transformation, chemical changes, plastic deformation and stress changes. This paper is to present principal data for safety design by verifying the effect of grinding conditions and method in grinding layers and to explain the method of measuring surface integrity. In this paper, structural steel(SM20C) is used as a workpiece. Of integrity, surface roughness in view of surface texture is analyzed by frequency domain and residual stress, structures and defect of ground layers in view of surface metallurgy are investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.52-55
• /
• 1997

In this paper, the case study of reducing rotational errors is done for a grinding spindle with an active magnetic bearing system. The rotational errors acting on the magnetic bearing spindle are due to mass unbalance of rotor, runout, grinding excitation and unmodeled nonlinear dynamics of electromagnets. For the most case, the electrical runout of sensor target is big even in well-finished surface; this runout can cause a rotation error amplified by feedback control system. The adaptive feedforward method based on LMS algorithm is discussed to compensate this kind of runout effects, and investigated its effectiveness by numerical simulation and experimental analysis. The rotor orbit size in both bearings is reduced about to 5 pin due to lX rejection by feedforward control up to 50, 000 rpm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.605-608
• /
• 1997

In this paper, the case study of reducing rotational errors is done for a grinding spindle with an active magnetic bearing system. The rotational errors acting on the magnetic bearing spindle are due to mass unbalance of rotor, runout, grinding excitation and ed nonlinear dynamics of electromagnets. For the most case, the electrical runout of sensor target is big even in well-finished surface; this runout can cause a rotation error amplified by feedback control system. The adaptive feedforward method based on LMS algorithm is discussed to compensate this kind of runout effects, and investigated its effectiveness by numerical simulation and experimental analysis. The rotor orbit size in both bearings is reduced about to 5 pin due to lX rejection by feedforward control up to 50,000 rpm.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.47-55
• /
• 1987

The purpose of this work is to establish the basic calibration data for the efficiency of grinding by investigating the Bond's Work Index employing Korean Kaolin as a reference mateial with the laboratory-scale ball mill. A small ordinary ball mill has a dimension of 133 inside diameter and 144mm long. The analysis of the experimental results in this work sets up a equivalent calibration method with the laboratory-scale ball mill to those with special mill. The theoretical expression, derived from the rate equation proposed by Miwa, is obtained to anticipitate the stable revolution number for the next grinding cycle. The proposed equation is more systematic and acurate than lshihara's empirical equation is more systematic and acurate than lshihara's empirical equation for the measurement of gindability of a ball mill.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.126-133
• /
• 2019

본 연구는 분쇄효율 향상 및 시멘트의 품질 문제 해결 등 고품질의 시멘트를 제조하기 위하여 멜라민계 기능성 분쇄조제의 합성 및 이를 적용한 시멘트의 물리적 특성을 검토하였다. 시멘트 클링커의 분쇄 효율 및 제조된 시멘트의 물리적 특성을 향상시키기 위하여 멜라민계 공중합체를 methyolation, sulfonation 및 산촉매를 이용하여 polymerzation의 3단계로 나누어 반응을 진행하였다. 합성된 멜라민계 공중합체를 시멘트 클링커 분쇄 공정에 적용하여 기존의 분쇄효율을 향상시키기 위하여 사용되는 DEG(Diethylene glycol)와 압축강도를 향상시키기 위하여 사용되는 TIPA계(Triisopropanol amine) 분쇄조제와의 물리적 특성을 비교하였다. 연구결과 분쇄능의 경우 유기 고분자의 시멘트 입자로의 안정한 흡착으로 표면 에너지를 감소시킴에 따라 기존 DEG와 TIPA계 분쇄조제 대비 분말도는 4~6% 증진시키는 것으로 나타났으며, 압축강도는 기존 DEG 대비 초기 강도에 있어서는 약 30%, 28일 재령의 경우 약 13%이상의 강도 증진 효과가 확인됨에 따라 전체적인 품질은 기존 분쇄조제 대비 향상된 것으로 나타났다.

• 대한화장품학회지
• /
• 제30권4호
• /
• pp.543-548
• /
• 2004

메이크업 제품에 있어서 특히 아이섀도나 블러셔와 같은 포인트 메이크업 제품의 제조시 화사함이나 광택을 부여하기 위하여 사용되는 펄 안료에 대하여 분쇄시간에 따른 입도분포 변화와 결합제로 사용되는 바인더의 영향에 따른 입도분포의 변화에 대하여 검토하였다. 고속 회전형 믹서기를 사용하였으며 레이져 회절${\cdot}$산란법을 이용하여 입도분포를 측정하였다. 평균경 5 um의 펄 안료인 경우 120 s간 분쇄하였을시 4.5 um로 입자경의 변화 폭이 작지만, $45{\;}{\mu}m$인 경우 27 um로 현저히 작아지며 그에 따라 본래의 광택감도 떨어지는 것을 확인할 수 있었다. 바인더의 경우, raw material의 입자사이즈에 따라 분쇄시간과의 상관성을 확인하였으며, 바인더 함량에 따라 입자간의 응집에 의하여 발생하는 분립체의 입도분포의 변화에 대해서도 고찰하였다.