• Journal of Industrial Convergence
• /
• v.6 no.1
• /
• pp.3-16
• /
• 2008

Musculoskeletal Disorders are usually caused or aggravated by poor work processes and unsuitable working conditions - that involve repetitive or forceful movements or the maintenance of constrained or awkward postures. The condition is characterized by discomfort and persistent pain. An investigation on the risk factors of musculoskeletal should have done one time per three years. Cause of musculoskeletal disorders for assembly line worker was a low back pain(LBP). Recommendations of improvement for productivity are redesign of working conditions, exercise, prevent of musculoskeletal disorders and avoiding stress.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.1
• /
• pp.17-22
• /
• 1979

To catch live anchovies which will be used as bait for skipjack fishing, set net, lift net and purse seine net were tried in Korean coastal waters by the authors. Among them the former two methods showed unsuitable to catch in bulk even though the catch showed good survival. The last showed unsuitable result because of the lack of exclusive fishing boat and skilled fishermen. From the viewpoint of practical use, the authors regarded it may be suitable to improve the traditional boat seine net which are used as major fishing gear to catch anchovies in Korea, so far as Korea is concerned. So we tried to catch live anchovies with partially reconstructed boat seine net and to hold the catch in the creel improved by the authors. Even though the result showed less than 70 percent of survival, slightly worse than other fishing methods, the experimented method showed to be practical in catching the live anchovies intensively.

• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.444-451
• /
• 2018

Objectives: This study was carried out to provide safe seafood to the public through simultaneous analysis rapid inspections for residual veterinary drugs in 150 fishery products in 2016. Methods: Quinolones (9), Sulfonamides (14), Penicillins (2), Cephalosporins (3), Tetracyclines (4), Macrolides (4), Lincosamides (2), Pleuromutilin (1), Phenicols (4), benzylpyrimidines (2), Others (1) Malachite green (2), and Melamine (1) were analyzed for 49 species using by HPLC and HPLC-MSMS. Results: There were six unsuitable samples, five among fish and one for crustaceans. Within the standard detection were five fish. The antibiotics found were Quinolones (50%), Tetracyclines (33%) and Penicillins (17%). Conclusions: As a result of the experiment, there were six unsuitable samples, five for fish and one for crustaceans. The most prevalent antibiotics were Quinolones. The quinolone antibiotics are highly persistent in fish tissues, so they require more time than the withdrawal period for other common veterinary drugs. Careful attention is required when they are used in fish farms.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.2
• /
• pp.28-38
• /
• 2000

The aim of this study is evaluate artificial soils which are used alone or in a blend with field soil for the greening of artificial ground. To achieve these, determination of physicochemical properties was made in four artificial media[Perlite small grain(PSG), perlite large grain(PLG), crushed porous glass+bark(AS), crushed porous glass(CPG)] used alone and/or in a blend with field soil, then evaluation of their effect on th plant growth of Ligustrum obtusifolium and Syringa vulgaris were conducted. In bulk density of root media at field capacity and the saturated hydraulic conductivity, LG and AS showed good performance. But, PLG was though to be unsuitable as artificial soil when used alone because of poor plant growth. PLG, AS, and CPG were thought to be good when it is used in a blend with field soil. But, PSG was thought to be unsuitable. In the result, PSG is recommended as artificial soil which is used alone for greening of artificial ground. PLG is recommended as artificial soil which is used in a blend with field soil. AS is recommended as artificial soil which is used alone and in a blend with field soil. Thought CPG+field soil(v/v, 1:1) might be undesirable in consideration of the chemical properties in six months after planting, it was thought to be superior to th other treatments in the plant growth. CPG can be used as artificial soil which is used in a blend with field soil. Follow-up studies are being conducted to investigate their effects on the plant growth of the other plants and the practical use of them in artificial grounds.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.55-64
• /
• 2014

While utilizing high resolution satellite image for land use classification has been popularized, object-oriented classification has been adapted as an affordable classification method rather than conventional statistical classification. The aim of this study is to extract the paddy field area using object-oriented classification with time series NDVI from high-resolution satellite images, and the RapidEye satellite images of Jaeryung-gun in North Korea were used. For the implementation of object-oriented classification, creating objects by setting of scale and color factors was conducted, then 3 different land use categories including paddy field, forest and water bodies were extracted from the objects applying the variation of time-series NDVI. The unclassified objects which were not involved into the previous extraction classified into 6 categories using unsupervised classification by clustering analysis. Finally, the unsuitable paddy field area were assorted from the topographic factors such as elevation and slope. As the results, about 33.6 % of the total area (32313.1 ha) were classified to the paddy field (10847.9 ha) and 851.0 ha was classified to the unsuitable paddy field based on the topographic factors. The user accuracy of paddy field classification was calculated to 83.3 %, and among those, about 60.0 % of total paddy fields were classified from the time-series NDVI before the unsupervised classification. Other land covers were classified as to upland(5255.2 ha), forest (10961.0 ha), residential area and bare land (3309.6 ha), and lake and river (1784.4 ha) from this object-oriented classification.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.24-24
• /
• 2018

Degraded plantation forests are increasing because of unfavorable forestry conditions prevailing in Japan, including falling timber prices, increasing operational costs, and aging and declining forestry workforce. To remedy this situation, appropriate management strategy is required. This study introduces the challenges of Odai Town, Mie Prefecture that employed a new management strategy by evaluating site suitability for conifer forests and that proposes a new forest management regime of planting deciduous trees in unsuitable sites. The site suitability for conifer forests was evaluated from two aspects: the natural site conditions and the relationship among site conditions, growth, and damage by Anaglyptus subfasciatus Pic. in Cryptomeria japonica D. Don and Chamaecyparis obtusa Sieb. Et Zucc. forests. By analyzing the relationship among site conditions, growth, and insect damage based on field data obtained in plantation forests, growth evaluation and insect damage evaluation maps were developed. Based on the natural forest investigation, natural site condition maps for C. japonica and C. obtusa were established. Furthermore, by integrating these evaluation maps with the forest road maps showing the accessibility to the forest, the forest management regime for the whole plantation area of Odai Town was established. The forest management regime map indicates the sites suitable for forestry: suitable for long-rotation, short-rotation, and potential sites for short-rotation. The sites unsuitable for forestry were considered to be more suitable for broadleaved forests. Clear-cutting was conducted in a small area and different seral stage saplings (approximately 20 deciduous tree species) suitable to the site conditions were planted in an area of $80-120m^2$ protected by deer-fences. This might establish a forest composed of many species with a multilayer vertical forest structure in a short period. The planted saplings were distributed neither randomly nor uniformly to reflect the natural distribution of trees in the forest. A challenge to develop new products using the deciduous trees has started, such as wood chips for preparing smoked food, essential oil, and deodorizer. As these challenges have just begun, their effects on enhancing sustainable resource management are still being monitored. Even with the challenges, this regime can be of high value as a management strategy to remedy the situation of expansion of degraded forests in Japan.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.163-171
• /
• 1998

Continuously contacting with camshaft the face of Valve Lifter made of cast iron brings about abnormal wear such as unfairwear or earlywear because it is heavily loaded in the valve train systems as the engine gets more powered. This abnormal wear becomes a defet namely over-clearance when the valve is lifting so that the fuel gas imperfectly combusted by unsuitable open or close aaction of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major cause of air pollution and combustion chamber. The imperfectly combusted by unsuitable open or close action of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major causes of air pollution and decrease of the engine output. Consequently to prevent this wear this study was to develop the valve lifter which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened ceramics alloy which has high wear resistance. Having the excellent surface hardness with Hv1100-1200 the sintered body developed with superhardened alloy(WC) can endure the severe face loading in the valve train system. We experienced with various brazing alloys and obtained the excellent joining strength to the joint had 150MPa shear strength. Interface analysis and microstructure in a joint were examined through SEM & EDS Optical microscope. Also 2,500 hours high speed(3,000-4,000 rpm) and continuous (1step 12hr) engine dynamo testing was carried out to casting valve liter and ceramics-metal joint valve lifter so that the abnormal wears were compared and evaluated.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.169-180
• /
• 2014

Since Seoul city supplied 'Sangsang Children's Park', domestic children's parks are changing from formal facilities to creative play space recently. From eco-friendly safe playground model development project, the awareness of eco-friendly playground, namely children's park is increasing and its necessity is magnified. However, we could not know how well most children's parks aimed at the eco-friendly playground reflect eco-friendly features and whether they are eco-friendly or not because there are not the specific planning guidelines and evaluation standards for making the eco-friendly playground or children's park. Therefore, in this study we established the environment-friendliness evaluation standards of children's parks and estimated the environment-friendly features of the 9 parks built on the subject of green among Sangsang Children's Parks. In the observational survey of the 9 parks, we evaluated the environment-friendliness of these parks in the 8 fields(location and placement, ecological environment, play space, play equipment and facilities, additional facilities, materials and resources, energy saving, environmental load reduction) according to the levels(suitable, partial reflection, unsuitable, non-reflection) of reflection of eco-friendly planning factors. The assessment results showed that 4 items (location and placement, additional facilities, play space, play equipment and facilities) were suitable and others (energy saving, environmental load reduction, ecological environment, materials and resources) were partial reflection or unsuitable. Therefore, on the basis of these results, this study proposed the planning indicators to be considered first and the planning factors that should be complemented and improved in the construction of eco-friendly children's park in future.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.87-98
• /
• 2015

As an apartment house as well as improving quality of life is becoming one of the brands, it is increasing the importance of the outer space with the facilities in the housing complex. In particular, the outdoor playground such as the community facilities that children and adults share as the activity areas for residents has received attention. However, actually children have not used many of Korean apartment housing playgrounds that were installed formally in the scrap area according to the housing plan by residential construction standards. it is considered necessary to improve the quality of the playground in housing complex and reform it in order to make the eco-friendly play space in which children can play safely and h healthily. As an alternative, we analyzed the eco-friendly properties of the playgrounds installed in the eco-friendly housing complex in Germany and derived the main planning elements of eco-friendly playground. In the observational survey of the 10 playgrounds in 9 housing complexes in 5 regions in Germany, we evaluated the environment-friendliness of these playgrounds in the 8 fields(location and placement, ecological environment, play space, play equipment and facilities, additional facilities, materials and resources, energy saving, environmental load reduction) according to the levels(suitable, partial reflection, unsuitable, non-reflection) of reflection of eco-friendly planning factors. The following is the summary of the results about the reflection of eco-friendly planning factors. In terms of "suitable": location and placement(88.8%), play equipment and facilities(73.5%), additional facilities(60.6%), environmental load reduction(54%), and ecological environment(50%) were higher than others. In terms of "unsuitable": there was nothing. In terms of "non-reflection": energy saving(95%), additional facilities(32.2%), and materials and resources(30.9%) were in order. Therefore, on the basis of these results, this study proposed the planning indicators to be considered first and the planning factors that should be complemented and improved in the construction of apartment housing playground in future.