• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.31-34
• /
• 2012

케로신을 연료로 하는 동축 스월 분사기에 대해 정상 상태 및 비정상 상태의 연소 해석을 수행하였다. 난류연소 모델로 화학평형 상태로 가정하는 Non-premixed equilibrium 모델을 이용하였고, 고압의 조건에서 실제유체의 거동을 다룰 수 있도록 상태방정식으로 SRK(Soave-Redlich-Kwong) 상태방정식을 적용하였다. 해석을 통해 온도분포, OH 질량분율 등 정상 상태의 계산 결과와 시간 평균된 비정상 상태의 계산 결과를 비교하였고, 이들 간의 화염 구조가 서로 상이함을 확인할 수 있었다.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.26-32
• /
• 2000

Design load calculations which depend on the thermal characteristics of the building structure such as the wall, roof, and fenestration provide the basic data for selecting an HVAC system and its equipment. Most of domestic multi-family houses include a high thermal storage layer like massive concrete structure and a floor heating structure. This study is to compare the results of the design heating load between steady state and unsteady state calculation in order to comprehend the thermal storage effect in multi-family houses. The design heating load under the steady state calculation is estimated from 5.4% to 7.8% larger than that under the unsteady state in the typical floor of a multi-family house model. The design heating load considered the safety factors like a orientation and location factor also is 21.4% to 26.5% larger than that by the unsteady state calculation. So, the safety factors for use of the practicing engineer are analyzed as the main factor of a heating plant oversizing.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.28-34
• /
• 1998

This paper introduced the thermal characteristics of Moss Rosenberg Verft spherical tank type LNG Carrier. Especially described the temperature variation during cooling down condition. It is not easy task to calculate the temperature variation because of unsteady state condition. In this paper, computer simulation program is developed by using a Tomas Algorithm on unsteady state condition and compared with calculation results and experimental results on existing LNG Carrier voyage.

• 소성∙가공
• /
• 제10권4호
• /
• pp.311-318
• /
• 2001

Porthole die extrusion has a great advantage in the forming of long hollow section tubes. It is difficult to produce long hollow section tubes with complicated section by the conventional extrusion process with a mandrel on the stem Because of the limit of the length of mandrel and the complexity of cross section. Porthole die extrusion is affected by many parameters, such as extrusion ratio, extrusion speed, die geometry, porthole number, bearing length etc. Up to now, most of studies about porthole die extrusion have been investigated by experiments or steady state FE-analysis. However, in this paper, porthole die extrusion is analysed by the unsteady state 3D FE-simulation. And the result of unsteady state analysis is compared with the experimental result. Also, the surface state of extruded tubes are examined for the various process conditions.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.247-255
• /
• 2016

본 논문에서는 핀틀 추력기의 비정상상태 특성을 파악하기 위하여 구동기의 속도를 측정하였으며, 정상상태 실험을 통해 비정상상태 실험 시스템을 구성하였다. 비정상상태 실험은 총 3 가지의 구동 속도(3.01 mm/s, 5.65 mm/s, 10.83 mm/s)를 이용하여 진행하였다. 그 결과 핀틀이 후진하는 경우가 전진하는 경우보다 더 빨리 명령 압력 값에 수렴하였으며, 이는 핀틀이 후진하는 경우가 연소실의 압력이 높은 상태로 형성되어 있기 때문이다. 핀틀이 전 후진하는 경우에 추력 곡선에 특이점들이 나타났으며, 이는 연소실 압력과 노즐 목 면적 변화에 기인하여 나타난 질유량 변화로 인한 것이다. 구동 속도가 빠를수록 이러한 현상이 뚜렷하게 나타났다.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.28-39
• /
• 2018

본 연구에서는 추력조절용 핀틀 노즐의 길이비에 따른 정상상태와 비정상상태 특성을 파악하기 위해 수치해석을 수행하였다. 노즐과 핀틀의 영역은 분리하여 격자를 생성하고 중첩격자기법을 사용하였다. 핀틀 형상은 길이비에 따라 5가지로 선택하였고, 정상상태 해석결과 핀틀의 길이가 길수록 추력과 추력계수가 높게 나타났다. 비정상상태 해석의 경우 핀틀의 속도에 따라서 연소실 압력 경향이 달라지며 추력과 유동구조에 영향을 미친다. 노즐 출구에서의 추력은 노즐목 단면적 변화에 빠른 응답특성을 보이며, 추력과 추력계수 등 성능 주요 인자들의 예측시 핀틀의 구동 속도와 핀틀 거동에 의한 연소실 압력파의 전달속도를 고려해야 한다.

• International Journal of Fluid Machinery and Systems
• /
• 제8권3호
• /
• pp.155-168
• /
• 2015

No-load speed is an important performance factor for the safe operation of hydropower systems. In turbine design, the manufacturers must conduct several model tests to calculate the accurate value of no-load speed for the complete range of operating conditions, which are expensive and time-consuming. The present study presents steady and unsteady methods for calculating no-load speed of a Francis turbine. The steady simulations are implemented using a commercial flow solver and an iterative algorithm that relies on a smooth relation between turbine torque and speed factor. The unsteady method uses unsteady RANS simulations that have been integrated with a user subroutine to compute and return the value of runner speed, time step and friction torque. The main goal of this research is to evaluate and compare the two methods by calculating turbine dynamic parameters for three test cases consisting of high and medium head Francis turbines. Overall, the numerical results agreed well with experimental data. The unsteady method provided more accurate results in the opening angle range from 20 to 26 degrees. Nevertheless, the steady results showed more consistency than unsteady results for the three different test cases at different operating conditions.

• 설비공학논문집
• /
• 제27권12호
• /
• pp.633-638
• /
• 2015

This study evaluates the capacity of night purging in office buildings to reduce the cooling load. RTS-SAREK is used to estimate the performance of night purging on the steady state. To overcome steady state RTS program limitations, we added unsteady heat transfer equations. When the ACH (Air Change per Hour) increases, the wall temperature decreases in both the steady and unsteady states. The unsteady heat transfer rate is different from the steady transfer rate, which validates the unsteady calculation. When ACH is low, the heat transfer rate increases continuously with time. When ACH becomes higher, the heat transfer rate increases and decreases with time. When ACH is quite high, there exists a large difference in the heat transfer rate between the steady and unsteady calculations, which emphasizes the importance of the unsteady calculation.

• 한국유체기계학회 논문집
• /
• 제5권1호
• /
• pp.13-19
• /
• 2002

In the present study, a numerical simulation is performed for the flow through a cooling fan. The computation was performed by using commercial code, STAR-CD. A rotating fan was simulated by rotational motions using MRF (Multiple Rotating Reference Frame) in a steady-state analysis and sliding interface (rotating meshes) in an unsteady-state analysis. The results of numerical computation were in good agreement with experimental data. In order to calculate the acoustic signal, the unsteady flow-field was firstly calculated. The acoustics of the fan is calculated by using acoustic analogy based on the unsteady flow-field. The predicted acoustic signal shows the characteristics of the uneven bladed-fan.

• 설비공학논문집
• /
• 제2권1호
• /
• pp.63-73
• /
• 1990

A numerical analysis of initial unsteady state flow and heat transfer in an enclosed cavity has been performed by the Modified QUICK Scheme. The stable QUICK Scheme which modified the coefficient always to be positive is included in this numerical analysis. The implicit method is applied to solve the unsteady state flow; between iterations the PISO (Pressure - Implicit with Splitting of Operators) algorithm is employed to correct and update the velocity and pressure fields on a staggered grid. The accuracy of the Modified QUICK Scheme is proved by applying fewer grid systems than those which Ghia et al. and Davis applied. The initial unsteady mixed convection in an enclosed cavity is analyzed using the above numerical procedure. This study focuses on the development of the large main vortex and secondary vortex in forced convection, the effects of the Rayleigh Number in natural convection and the relative direction of the forced and natural convection.