• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.2
• /
• pp.61-70
• /
• 2023

PURPOSE: This study evaluated an intrinsic foot strengthening exercise method for flat feet by comparing the effects of intrinsic exercises on a stable surface and intrinsic exercises on an unstable surface. METHODS: Twenty-four people with flat feet were divided into two groups. The control group performed short foot exercises and toe towel curl exercises on the stable support surface. The experimental group performed short foot exercises and toe towel curl exercises on an unstable support surface using Aerostep. The navicular drop test, and the static and dynamic balance were measured before and after the intervention. RESULTS: In the experimental and control groups, there was a significant difference in the navicular drop test and static balance before and after the intervention (p < .05). On the other hand, there was no significant difference between the two groups (p > .05). In the dynamic balance, the experimental group showed significant differences in all directions after the intervention (p < .05). The control group showed significant differences in the postero-lateral direction and posteromedial direction (p < .05). In particular, in the forward direction, the experimental group had a more significant change than the control group (p < .05). CONCLUSION: Intrinsic foot muscle strengthening exercises performed on unstable surfaces can be an effective clinical exercise method to improve the dynamic balance ability of people with flat feet.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.17-22
• /
• 2003

An airship is statically unstable, because it has no wing, relatively small tails and a large hull. Hence, an accurate prediction of dynamic stability is critical. In this study, dynamic stability data of the 50m Length Airship were acquired through forced oscillation wind tunnel tests. The tests were done in Birhle Applied Research Inc's Lange Amplitude Multi-Purpose(BAR LAMP) Facility located in Germany. The tests were composed with 16 static runs and 26 dynamic runs. As results, it is obtained that dynamic characteristics of the airship depend on the sideslip angle, the angular rate and its direction as well as the angle of attack. Generally, three directional moments have damping, but the normal force, the side force, and the cross-derivatives are unstable. The dynamic derivatives are not sensitive to the control surfaces, but nonlinear to the sideslip angle.

• Tribology and Lubricants
• /
• v.37 no.4
• /
• pp.129-135
• /
• 2021

An air-bearing stage uses externally pressurized air as the lubricant between the stage and the rail. The supporting force generated by the supplied air makes the stage rise and move smoothly with extremely low friction. Mechanical contacts rarely happen, the bearing surfaces do not produce wear particles, and dust is not generated. It also has the advantage of having low energy loss and high precision. Because of its advantages, an air-bearing stage is used in several types of machines that require high precision. In this article, the effect of the pocket depth on the hammering phenomena of the air bearing is studied. An analysis program is developed to calculate the dynamic behavior of the stage by solving the Reynolds equation between the stage and the guideway and the equations of motion on the stage. The acceleration, constant movement, and deceleration are applied to the stage. The stage is modeled as a five-degree-of-freedom system. In the course of the dynamic behavior, the hammering phenomena occur under some special conditions. The deeper the pocket, the more unstable the behavior of the stage, and air hammering occurs when it exceeds a certain depth. In addition, the higher the supply pressure, the more unstable the behavior of the stage. However, hammering occurs even with a shallow pocket depth. Other conditions that affect the hammering phenomena are calculated and discussed.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.1
• /
• pp.29-33
• /
• 2016

Objective: This study compared the muscle activities of the erector spinae (ES), the external oblique (EO), and the rectus abdominis (RA) on three different surfaces. The purpose of this study was to determine which surface induces the highest muscle activity during the plank exercises. The information from this study can be used to recommend plank exercises to athletes and patients with weak core muscles. Design: Cross-sectional study. Methods: The subjects include 20 adult males attending S University in Seoul. Participants completed each plank exercise on three different surfaces. To measure muscle activities, researchers used the values from electromyography. The measurement excluded the initial two and final two seconds and collected information on the RA, EO, and ES in each posture of each subject. Results: The left external oblique showed significant differences between the plank position on stable ground (ST) and the plank position using a suspension device (SL) (p<0.05) and between the plank position on the unstable ground (US) and SL (p<0.05). The right rectus abdominis and left rectus abdominis displayed statistically significant differences between the ST and the US (p<0.05) and between the ST and the SL (p<0.05). The right erector spinae had a statistically significant difference between ST and US (p<0.05). Conclusions: The plank exercise strengthens the core muscles effectively, and muscle activity is related to the posture of the exercise and the location of the muscle. These results suggest that plank exercises improve muscle activities. Additionally, plank exercises can be applied to general medical care.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.3
• /
• pp.48-55
• /
• 2022

Background: The purpose of this study is to examine the effect of push-up plus exercise on the changes in the thickness of the trapezius trapezius, serratus anterior and pectoralis major muscles involved in shoulder stability in various support surfaces. Design: Randomized controlled trial. Methods: The thickness change of the shoulder stabilizing muscle was measured using an ultrasound device. Corresponding t-test was performed to confirm the change within the group before the experiment and after 5 weeks. And one-way ANOVA was used to confirm the change between groups after 5 weeks. As a post hoc test, the least significant difference test was performed, and the significance level was set to a=0.05. Results: Changes in the thickness of the trapezius muscle within the group were significantly different between UPEG and SPEG after 5 weeks (p<0.05), and there was a significant difference between groups after 5 weeks (p<0.05). Changes in the thickness of the serratus anterior and pectoralis major muscle within the group were significantly different after 5 weeks in PEG, UPEG and SPEG (p<0.05), and the changes between the groups were significantly different in the serratus anterior muscle after 5 weeks (p<0.05). Conclusion: From the results of this study, it was found that the push-up exercise on an unstable support surface was effective for strengthening the trapezius upper and serratus anterior. This study intends to suggest the possibility of application as basic data for a push-up plus exercise program in clinical practice.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.173-179
• /
• 2000

The friction and wear characteristics of brake friction materials reinforced with aramid fiber, carbon fiber, glass fiber, and potassium titanate whiskers were investigated using a pad-on-disk type friction tester. In particular, the morphology of rubbing surfaces was carefully investigated to correlate the friction performance and properties of transfer films. The aramid fiber reinforced specimen showed severe oscillation of friction coefficient at low speed and low applied pressure. The carbon fiber reinforced specimen showing better friction stability exhibited uniform and stable transfer film than any other specimens. The glass fiber reinforced specimen showed unstable friction changes at high speed and high-applied pressure and the non-uniform transfer film was observed in both friction material and rotor surface. The potassium titanate whiskers reinforced specimen showed stable coherent transfer film. The wear test exhibited the potassium titanate whiskers reinforced specimen was lowest in wear amount and glass fiber reinforced specimen showed the severe wear.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.1
• /
• pp.46-57
• /
• 2013

Flutter stability and buffeting response have been the topics of most concern in the design state of long-span suspension bridges. Among approaches towards the aerodynamic stability, the aerodynamic-based control method which uses control surfaces to generate forces counteracting the unstable excitations has shown to be promising. This study focused on the mechanically controlled system using flaps; two flaps were attached on both sides of a bridge deck and were driven by the motions of the bridge deck. When the flaps moved, the overall cross section of the bridge deck containing these flaps was continuously changing. As a consequence, the aerodynamic forces also changed. The efficiency of the control was studied through the numerical simulation and experimental investigations. The values of quasi-steady forces, together with the experimental aerodynamic force coefficients, were proposed in the simulation. The results showed that the passive flap control can, with appropriate motion of the flaps, solve the aerodynamic instability. The efficiency of the flap control on the full span of a simple suspension bridge was also carried out. The mode-by-mode technique was applied for the investigation. The results revealed that the efficiency of the flap control relates to the mode number, the installed location of the flap, and the flap length.

• Atmosphere
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2013

In this study, the effects of atmospheric stability and surface temperature on the microscale local airflow are investigated in a hydrological suburban area using a computational fluid dynamics (CFD) model. The model domain includes the river and industrial complex for analyzing the effect of water system and topography on local airflow. The surface boundary condition is constructed using a geographic information system (GIS) data in order to more accurately build topography and buildings. In the control experiment, it is shown that the topography and buildings mainly determine the microscale airflow (wind speed and wind direction). The sensitivity experiments of atmospheric stability (neutral, stable, and unstable conditions) represent the slight changes in wind speed with the increase in vertical temperature gradient. The differential heating of ground and water surfaces influences on the local meteorological factors such as air temperature, heat flow, and airflow. These results consequentially suggest that the meteorological impact assessment is accompanied by the changes of background land and atmospheric conditions. It is also demonstrated that the numerical experiments with very high spatial resolution can be useful for understanding microscale local meteorology.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.66-73
• /
• 2008

Present study examines the detonation wave propagation characteristics in annular channels. Numerical approaches used in the previous studies were extended with marching windows technique. Parametric study has been carried out using a radius of curvature normalized by the channel width considered as unique geometric parameter. In the channels of small radius of curvature, detonation wave is unstable and the regular cell structure is not observed. There is a critical radius of curvature where cell structure can be sustained. The effect of curvature makes the pressure difference on inner and outer surfaces where the detonation wave is overdriven. The results converge to that of straight channel as the radius of curvature gets larger, as expected.

• Transactions of Materials Processing
• /
• v.22 no.2
• /
• pp.86-92
• /
• 2013

When stamping ultra-high-strength steel (UHSS), the phenomenon of galling, which corresponds to a transfer of material from the sheet to the tool surface, occurs because of the high contact pressure between tool and workpiece. Galling leads to increased friction, unstable interface conditions, scratches on the sheet and the tool surfaces and, eventually, premature tool surface failures. Therefore, a simple and accurate evaluation method for tool scratching is necessary for the selection of tool material and coating, as well as for a better optimization of process conditions such as blank holder force and die radius. In this study, the pin-on-disc (PODT) and pin-on-flat surface (POFST) tests are conducted to quantitatively evaluate scratch-related tool life for stamping of UHSS. The variation of the friction coefficient is used as an indicator of scratch resulted from galling. The U-channel ironing test (UCIT) is performed in order to validate the results of the friction tests. This study shows that the POFST test provides a good quantitative estimation of tool life based on the occurrence of scratch.