• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.1057-1063
• /
• 1994

An instantaneous frequency analysis is a technique to examine a signature for the rotating machinery if the signal has several transitions within a cycle. This paper discusses the conditions of existing negative frequency components in the instantaneous frequency. By using a signal consisted of two frequency components, the instantaneous frequency analysis is conducted while the amplitude ratio between two frequency components has been changed. The analysis shows that, depending on the amplitude ratio, the instantaneous frequencies have averaged, zero-valued, or negative components. It turns out that the negative-valued instantaneous frequencies, which have been regarded as the noise effect, are the consequence of the calculation process for the multisignal components. The criteria of existing the negative values in instantaneous frequencies is given in terms of the relative amplitude ratio and the frequency difference. Especially when the amplitude ratio approaches to 1, the instantaneous frequency fluctuates ${\pm}\infty$ in theory, which implies that instantaneous frequency has unstable region around the amplitude ratio, 1.Also, as the frequency difference between major signal components is increased, the region of existing negative instantaneous becomes broader. In an instantaneous frequency analysis, therefore, a narrow band analysis is suggested, with extreme care if the amplitude ratio approaches to 1. In this paper, a vibration signal monitored from a rotating machinery is also examined as an application example in order to show the existence of negative instantaneous frequencies components.

• Journal of Power System Engineering
• /
• v.16 no.4
• /
• pp.51-59
• /
• 2012

The computational flow analysis using LES technique was carried out to investigate the flow characteristics of a sirocco fan under the maximum flowrate condition. The commercial SC/Tetra software was used for this unsteady and three-dimensional numerical analysis. In consequence, because a flow is unstable within the range of about 50% of a housing depth from a bellmouth around the cutoff region, the passing flow through the blade cascade occurred on the X-Y plane is a slow or a reverse with approaching to the housing inlet. Also, the secondary flow shows on the radial plane of a housing, and its vortex center exists within about 33% of a housing depth from a bellmouth except the cutoff region. Moreover, the flow occurring on the exit plane of a sirocco fan shows a complex secondary flow.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.10-18
• /
• 2004

The urban ecosystem, unlike the natural ecosystem, has been affected by the urban environment, so the existences of normal creatures have been threatened and eventually the stability has declined to consist of those that have adapted to such. Therefore, by creating a list of such organisms, their number of variety can be found out and their ecological distinction can be understood. Because flora is known to be an ecological index reflecting region's effects of human and societal environments, weather, and climates, it is a useful method of finding out the ecological position and distinctiveness of that region. The study site is part of watershed at Yangjae Stream, Kahngnam-ku, Seoul. In this study, the difference of flora in each land use type are investigated by plant identification. The purpose of this study is to evaluate the city's plant surviving environment, and eventually to contribute to the restoration of urban green spaces by finding out the plants which are appropriate for the corresponding environment. After doing the study, it was found that the urban forest is the most stable urban ecosystem while the urban park is seriously disturbed, and ecologically unstable. The urban stream is also disturbed continuously.

• Korean Journal of Community Nutrition
• /
• v.23 no.6
• /
• pp.506-515
• /
• 2018

Objectives: We investigated the operation needs of school meal support centers (SMSC) in Chungnam-do based on analysis of nutrition teachers' perception of them. Methods: The Chungnam government established the first SMSC in 2012. Thirteen SMSCs are currently being operated in Chungnam-do. To analyze the results quantitatively, we investigated nutrition teachers opinions regarding the necessity for SMSCs as a dependent variable and derived the independent variables based on the causal relationships with dependent variables using the ordered logit model. Those independent variables included region, school type, number of students, attitude regarding free meal policy, satisfaction with school meal policy, and preference for local food. Results: Briefly, teachers in the region in which the SMSC was located more strongly supported the SMSC. In addition, teachers in public schools with a smaller number of students believed that having a SMSC is more beneficial, and that other variables also affected the necessity for SMSCs. Moreover, nutrition teachers preferred local foods rather than organic foods because of the unstable supply of organic foods. Conclusions: Based on the results of this study, it was recommended that the local government implement the policy consistently. Moreover, it was recommended that the government operate the SMSC more efficiently, enhance the roles of the SMSC as the local organization responsible for student nutritional planing and expand the coverage of agricultural products.

• Nuclear Engineering and Technology
• /
• v.17 no.3
• /
• pp.193-199
• /
• 1985

Iodine-induced stress corrosion cracking tests of Zircaloy-4 cladding were undertaken using the modified infernal pressurization method. The effects of iodine concentration and applied stress were studied. The critical iodine concentration for SCC was found to be about 0.2 mg/$\textrm{cm}^2$ at 603$^{\circ}$K. The threshold stress was dependent on the test temperature and the mechanical properties of the specimen. The fracture surface showed that the crack propagated stepwise iron one grain to others until the material was unstable and then ruptured mechanically. The initial region showed the transgranular feature and the wedge-shaped cracks. As the crack proceeded, the transgranular and ductile-tearing mired feature appeared in the middle region.

• Journal of the Korean association of regional geographers
• /
• v.1 no.1
• /
• pp.23-43
• /
• 1995

This paper is the first part of a research which looks into the regional development process and the quality of life of Youngnam area, and which suggests a prospect and tasks for the future development of the region. Youngnam region has grown rapidly on the basis of labor-intensive light industries and standardized Fordist lage-scale heavy industries through the industrialization and urbanization of South Korea from the 1960s; but recently it has shown a relatively downward trend. The recent economic stagnation of Youngnam region can be seen as a result of uneven regional development in the national scale, which has brought out the increasing subcontracting relation within the region, the geographically excessive concentration of firms, the lack of growth potentiality of high-tech industries, the weakness of producer service, and the shortage of financial activities for capital flows. In addition, construction of physical and social infrastructures and management of urban central functions could not meet properly the rapid economic and urban growth of the region. Because of these problematics inherent in the economy of Yougnam region, the occupational status of regional dwellers is more or less unstable, and the wage level of employee as a whole in Youngnam region is lower than those of Seoul, although the wage level of labourers in manufacturing is relatively high. Moreover, the quality of life of dwellers in the region has some difficulties in the use of resources and ecological environment as well as the unequal provision of means of living and welfare facilities, even though it has been improved materially.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.39-47
• /
• 1997

Retinol as well as RA is well known to have many beneficial effects on aged skin. But the skin irritation potential and unstable condition of the products containing them have been some problems in their cosmetic uses. So, retinol containing gel product was developed for less skin irritancy and more stability in cosmetic products. To examine the clinical effects of retinlo containing product, we used cilnicla non-invasive assessment techniques on 40 volunteers for 6 months maintaining double-blind test conditions. According to our results, the use of retinol containing product improved skin color and hydration level slightly. But there was no statistical differences. There was no erythema reaction compared to the use of RA. Especially, the skin elasticity increased above 20% and skin wrinkles of crows' feet region decreased more than 10%. Besides the instrumental analysis, a large majority of volnteers felt that their skin were improved in the case of wrunkles, elasticity, hydration and color.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1805-1810
• /
• 1991

This paper derives the upper and the lower bound of the mean cycle time and the mean service time of the class 6 and the class 4, within which the minimum utilization constrain of the class 4 is guaranteed. Also, derived are conditions under which the token bus network is stable or unstable. These bounds and stable conditions are represented in terms of the high priority token hold time, the token rotation time and the arrival rate and the total station number etc. This paper suggest a parameter tuning algorithm in a partially symmetric token bus network with two classes, which maximizes the token rotation time for a suitable high priority token hold time and at the same time meets the stability condition of the network, the real time constraint and the minimum utilization constraint of the class 4.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.12
• /
• pp.41-49
• /
• 1997

This paper deals with the attitude control of a self-made VTOL vehicle which is round shape and has four fans and motors. Although hovering mechanisms are suitable for field work at a mountainous region or a building site etc., it is known that modeling the structure of the plant is quite difficult due to its unstable or uncertain characteristics. So, a robust controller is requried in order to cope with these uncertainties. WE first model the structure of the plant under the actual hovering setting and then determine the uncertainty of the acquired mathematical model by using system identification method as exactly as possible. We adopt the $H^{\infty}$ theory as a control algorithm because of its availability, and the structure of two-degree-of-freedom is used as a basic feedback control system to improve the transient response of the plant. Finally, we show the appropriateness of the designed controller through simulations and experiments. That is, the proposed VTOL system is able to maintain its roubust performance in spite of parameter variations and existing disturbances..

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.2 s.3
• /
• pp.5-12
• /
• 1999

This study presents the measured unsteady flctuation of impeller discharge flow for a centrifugal compressor in an unstable operating region. The characteristics of the blade-to-blade flow at rotating stall onset were investigated by measuring unsteady velocity fluctuations at several different diffuser axial distances using a hot wire anemometer. The flow characteristics in terms of the radial and tangential velocity components and the flow angle distribution at the impeller exit were analyzed using phase-locked ensemble averaging techniques. As a result, increase or decrease of the radial velocity component during the rotating stall is dominated by that of the suction side. The radial velocity distributions show the opposite trends in the regions where the radial velocity during rotating stall onset increases and decreases.