• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.581-589
• /
• 2015

This paper describes a monocular vision-based formation flight technology using two fixed wing unmanned aerial vehicles. To measuring relative position and attitude of a leader aircraft, a monocular camera installed in the front of the follower aircraft captures an image of the leader, and position and attitude are measured from the image using the KLT feature point tracker and POSIT algorithm. To verify the feasibility of this vision processing algorithm, a field test was performed using two light sports aircraft, and our experimental results show that the proposed monocular vision-based measurement algorithm is feasible. Performance verification for the proposed formation flight technology was carried out using the X-Plane flight simulator. The formation flight simulation system consists of two PCs playing the role of leader and follower. When the leader flies by the command of user, the follower aircraft tracks the leader by designed guidance and a PI control law, and all the information about leader was measured using monocular vision. This simulation shows that guidance using relative attitude information tracks the leader aircraft better than not using attitude information. This simulation shows absolute average errors for the relative position as follows: X-axis: 2.88 m, Y-axis: 2.09 m, and Z-axis: 0.44 m.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.79-87
• /
• 2023

항공기의 비행 제어법칙을 설계하기 위해서는 정확한 항공기 운동모델이 요구되며, 이를 구축하기 위한 공력 데이터베이스(DB)를 획득하는 데는 일반적으로 많은 횟수의 풍동시험을 수행해야 한다. 그러나 유인 항공기의 무인화 과정과 같이, 대상 항공기의 비행시험 데이터가 존재하는 경우, 파라미터 추정기법과 DB튜닝 절차를 통해 항공기 운동모델을 획득할 수 있다. 본 논문에서는 KC-100 항공기의 무인화를 위한 비선형 모델 구축 과정 및 검증 방법에 관해 기술한다. 추정기법 적용의 적합성을 판단하는 비행데이터 유효성 분석 과정과 최대공산 추정법을 사용한 선형모델 추정, 그 결과를 활용하는 공력 DB튜닝 과정과 이를 통해 최종 구축된 비선형 모델에 FFS 기준을 적용한 검증 결과를 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.52-56
• /
• 2004

Unmanned Aerial Vehicles (UAVs) are remotely piloted or self-piloted aircraft by inputted program in advance or artificial intelligence. In this study Aileron and Elevator are used to control the movement of airplane for horizontal and vertical flights about its longitudinal and lateral axis. In an introduction, the drone was linearly modeled by extracting aerodynamic parameter through flight test and simulation, lift and drag coefficient corresponding to angle of attack, changes of pitching moment coefficient. In the main subject, the flight simulation was performed after constructing hardware using TMS320F2812 from TI company and PID with lateral and longitudinal controller for horizontal and vertical flights. Flying characteristics of two system were estimated and compared through real flight test with hardware equipped algorithm and adaptive algorithm that was applied to consider external factors such as turbulence. In conclusion the control performance of the controller with proposed algorithm was streamlined at lateral and longitudinal controller respectively, we will discuss guidance command to pass way point.

• 항공우주시스템공학회지
• /
• 제6권1호
• /
• pp.19-25
• /
• 2012

Nowadays, the demand of civil application of an UAV has been being increased all over the world. And many projects are going on to develop a new regulatory system for an UAV to access a national airspace. Especially, to fly UAV over the non-restricted airspace as a standard airworthiness standard, many authority funded research institutes and associations are studying regulatory environment. For the UAV to access civil airspace, the certification system of the aviation regulation have to allow this. FAA of US, CASA of Australia and European authorities are now issuing an experimental airworthiness certificate to a civil UAV. This is the first step of issuing a standard airworthiness certificate. And many people believe that civil UAV can fly over a NAS if some technical issues are resolved. In this study, I would like to present an international trends of a civil UAV regulation system, reliability trend of unmanned aerial system and would like to bring up a our regulatory environment and suggest an UAV regulatory policy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.47.6-47
• /
• 2002

UAV(Unmanned Aerial Vehicle) has become one of the most popular military/commercial aerial robots in the new millenium. In spite of all the advantages that UAVs inherently have, it is not an easy job to develop a UAV because it requires very systematic and complete approaches in full development envelop. The ground test & evaluation phase has the utmost importance in the sense that a well developed system can be best verified on the ground. In addition, many of the aircraft crashes in the flight tests were resulted from the incomplete development procedure. In this research, a verification procedure of the whole airborne integrated system was conducted including the flight management sys...

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1260-1265
• /
• 2008

This study deals with modeling and flight control of quadrotor type (QRT) unmanned aerial vehicles (UAVs). Rigorous dynamic model of a QRT UAV is obtained both in reference and body frame coordinate systems. A disturbance observer (DOB) based controller using the derived dynamic models is also proposed for robust hovering control. The control input induced by DOB is helpful to use simple equations of motion satisfying accurate derived dynamics. The experimental results show the performance of the proposed control algorithm.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.82-94
• /
• 2001

The purpose of this paper is to analyze the static and dynamic stability-of the unmanned airship under development ; the target airship's over-all length of hull is 50m and the maximum diameter is 12.5m. For the analysis, the dynamic model of an airship was defined and both the nonlinear and linear dynamic equations of motion were derived. Two different configuration models (KA002Y and KA003Y) of the airship were used for the target model of the static stability analysis and the dynamic stability analysis. From the result of analyses, though the airship is unstable in static stability, dynamic characteristics of the airship can provide the stable dynamic stability. All of the results, airship models and dynamic flight equations will be an important basement and basic information for the next step of developing the automatic flight control system(AFCS) and the stability augmentation system(SAS) for the unmanned airship as well as for the stratospheric airship in the future.

• 한국항공운항학회지
• /
• 제17권4호
• /
• pp.1-7
• /
• 2009

The surge control system in unmanned turbojet engine must be capable of accounting uncertainties from engine transient conditions, random fluctuations of key parameters such as air pressure and fuel flow and engine modeling errors. In this paper, taking into consideration of its effectiveness as well as system stability, a fuzzy PI controller is proposed. The role of the fuzzy PI controller is to stabilize the unmanned aircraft upon occurring unexpected engine surge. The proposed control scheme is proved by computer simulation using a linear engine model. The simulation results on the state space model of a small turbojet engine illustrate the proposed control system achieves the desired performance.

• 항공우주시스템공학회지
• /
• 제14권6호
• /
• pp.1-9
• /
• 2020

Global e-commerce and delivery companies are actively pursuing last-mile delivery service using drones, and various delivery schedule planning studies have been conducted. In this study, separate individual route networks were constructed to reflect drone route constraints such as prohibited airspace and truck route constraints such as rivers, which previous studies did not incorporate. The A* algorithm was used to calculate the shortest path distance matrix between the starting point and destinations. In addition, we proposed an optimal delivery schedule plan using genetic algorithms and applied it to compare the efficiency with that of vehicle-only delivery.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.145-150
• /
• 2006

The paper deals with integrated navigation and sense & avoid systems for small unmanned aerial vehicles (UAV). First an introduction to the current UAV activities of the institute is given. It is followed by an overview about the integrated navigation system developed for small UAVs. The system is based on a tightly-coupled GPS/INS architecture. But instead of using delta-ranges, time-differenced carrier phases are used to aid the INS. Finally, results from navigation filter validation in flight tests are presented. After that an overview about sense and avoid strategies for application in small unmanned aircraft is given. From this a guideline for developing such a system for the institute's UAVs is presented.