• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1820-1831
• /
• 2010

When interacting with unknown environments, an autonomous agent needs to decide which action or action order can result in a good state and determine the transition probability based on the current state and the action taken. The traditional multiple sequential learning model requires predefined probability of the states' transition. This paper proposes a multiple sequential learning and prediction system with definition of autonomous states to enhance the automatic performance of existing AI algorithms. In sequence learning process, the sensed states are classified into several group by a set of proposed motivation filters to reduce the learning computation. In prediction process, the learning agent makes a decision based on the estimation of each state's cost to get a high payoff from the given environment. The proposed learning and prediction algorithms heightens the automatic planning of the autonomous agent for interacting with the dynamic unknown environment. This model was tested in a virtual library.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.786-795
• /
• 2000

In this paper, a new impedance force control method for deburring and polishing process is proposed. The proposed method is robust to deal with unknown environment stiffness as unknown well as environment location. An adaptive technique is used to minimize the force error occurred due to unknown environment surface profile. A robust position control algorithm based on time-delayed information is used to cancel out uncertainties in robot dynamics. A three link robot manipulator is used to demonstrate performances of the proposed control on deburring and polishing tasks. Stability analysis for the adaptive control is presented and its results are confirmed by simulations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.133-141
• /
• 2011

In this study, different calibration approaches for reduced sulfur compounds (RSCs) were investigated by using thermal desorption coupled with gas chromatography (GC) and pulsed flame photometric detection (PFPD). To evaluate the effects of calibration procedures, gaseous standards of 4 RSCs ($H_2S$, $CH_3SH$, DMS, and DMDS) prepared at 10 ppm level were analyzed at 7 loading injection volumes (40, 60, 80, 100, 160, 240, and 320 ${\mu}L$). The results were then compared with calibration curves made with the Z (zero offset) and N (non-zero offset) method. The concentrations of unknown samples were then quantified by using R (ratio) method in which the slope values are compared between standards and samples. Secondly, in A (average) method, results obtained from a multi-point analysis of unknown samples were also averaged to extract representative values for each sample. Results of both experiments showed that analytical error of low molecular weight components (such as $H_2S$ and $CH_3SH$) was greatly expanded with the Z method. In conclusion, the combined application of N-A method was the more realistic approach to reduce biases in the quantification of RSCs.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.271-277
• /
• 2019

Objectives: A 46-year-old woman who had worked on cleaning stainless steel containers with Initially unknown powders died from acute silicosis. To determine whether the acute silicosis was related to his work environment, we conducted exposure assessment the level of exposure to respirable crystalline silica(RCS) during cleaning stainless steel containers with unknown powders. Methods: The exposure assessment of RCS were undertaken according to the National Institute for Occupational Safety and Health(NIOSH) method 7500. The components of the unknown powder were analyzed using X-ray Diffraction. Results: The unknown powder was found to be natural diatomaceous earth, which contained 12% and 9% quartz and cristobalite, respectively, crystalline silica. In the case of cleaning stainless steel containers with diatomaceous earth powder, the primary measurement resulted in 1.3 times higher occupational exposure limit of MOEL(in sum of quartz and cristobalite concentration) and 3.9 times higher in secondary measurement. The workbench was equipped with a local exhaust system, but because there was no hood at the end of the duct, the wind speed at the opening of the duct was 12 m/sec, whereas the controlled wind speed at the working position was only 0.3 m/sec below the legal standard. Conclusions: There is an urgent need to install the hood, conduct safety and health education for employers and workers, and periodically monitoring and manage the working environment.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.83-91
• /
• 2011

The roadmap DB update for unknown roads is a very important factor for car navigation systems. In this paper, we propose a cloud computing based roadmap generation method for use between heterogeneous navigation system for unknown roads. While the drivers drive on unknown roads, the proposed method extracts the road attribute information, and then generates the metadata in an XML format that is available for the heterogeneous navigation systems in a cloud environment. The metadata is proposed to be used as a replacement for conventional proprietary roadmap formats which used by roadmap providers, which is efficient for heterogeneous navigation system providers in a cloud computing environment. Then, this metadata is provided to the roadmap DB providers through the cloud computing interfaces. With the proposed method, the roadmap DB providers update the own roadmap DB for navigation systems in real time. Therefore, the proposed method can reduce the costs of an actual traveling test and the maintenance for the roadmap DB provides. Thus, the cloud-oriented road map generation method can more efficiently update the unknown road information.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.918-925
• /
• 2017

This paper presents a path planning problem for multi-robot system in the environment with dynamic obstacles. In order to guide the robots move along a collision-free path efficiently and reach the goal position quickly, a navigation method based on fuzzy logic controllers has been developed by using proximity sensors. There are two kinds of fuzzy controllers developed in this work, one is used for obstacle avoidance and the other is used for orientation to the target. Both static and dynamic obstacles are included in the environment and the dynamic obstacles are defined with no type of restriction of direction and velocity. Here, the environment is unknown for all the robots and the robots should detect the surrounding information only by the sensors installed on their bodies. The simulation results show that the proposed method has a positive effectiveness for the path planning problem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.93-100
• /
• 2007

The mobile robots to rescue a life in a disaster area and to explore planets demand high mobility as well as recognition of the environment. To avoid unknown obstacles exactly in unknown environment, accurate sensing is required. This paper proposes a sensor fusion to recognize unknown obstacles accurately by using low-cost sensors. Ultrasonic sensors and infrared sensors are used in this paper to avoid obstacles. If only one of these sensors is used alone, it is not useful fer the mobile robots to complete their tasks in the real world since the surrounding environment in the real world is complex and composed of many kinds of materials. So infrared sensor may not recognize transparent or reflective obstacles and ultrasonic sensor may not recognize narrow obstacles, far example, columns of small diameter. Therefore, I selected six ultrasonic sensors and five infrared sensors to detect obstacles. Then, I fused ultrasonic sensors with infrared sensors in order that both advantages and disadvantages of each sensor are utilized together. In fusing sensors, fuzzy algorithm is used to cope with the uncertainties of each sensor. TAMRY which is terrain-adaptive mobile robot is used as the mobile robot for experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.703-709
• /
• 2000

This paper proposes a compliance control strategy for the robot manipulators accidentally interact-ing with an unknown environment. In this proposed method each in the diagonal stiffness matrix corre-sponding to the task coordinate in a Cartesian space is adaptively adjusted during contact along the corresponding axis based on the contact force with its environment. This method can be used for both unconstrained and constrained motions without any switching mechanism which often causes undesirable instability and/or vibrational motion of the end-effector. The experimental results show the effectiveness of the proposed method by employing a two link direct drive manipulator interacting with an unknown environment.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2342-2344
• /
• 1998

In this paper, the path planner is presented for a robot to achieve an efficient path forward the given goal position in two dimensional environment which is involved with partially unknown obstacles. The path planner consists of three major components: off-line path planning, on-line path planning, and modification of planned path. Off-line path planning is based on known environment and creates the shortest path. On-line path planning is for finding unknown obstacles. The modification can be accomplished, by genetic algorithm, to be smooth path for preventing slippage and excessive centrifugal force.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.1
• /
• pp.61-67
• /
• 1999

There has been an ever increasing interest in mobile robot for home services. However, issues currently being investigated for path planning of the mobile robot is concentrated to solving the problem of finding the optimal path from the initial location to the final location under the given performance index. In this study, we newly present a sweeping algorithm for autonomous mobile robot to cover the whole closed area under the unknown environment. And we verify the validity the validity of the formalized algorithm by computer simulation with the changing environment conditions. In addition to this, we analyse the effect of real system implementation of the proposed algorithm to a experimental miniature mobile robit(Khepera).