• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1769-1776
• /
• 2000

In this paper a new method is proposed to identify a modulation method in the case of unknown digitally modulated input signals. The proposed identification method is implemented with an artificial neural network which is based on characteristic feature extracted from the instantaneous amplitude the instantaneous phase and the instantaneous frequency of the input signals. The proposed method was simulated with 9 type signals (ASK2, FSK2, FSK4, PSK2, PSK4, PSK8, QAM8, QAM16) in a noisy communication environment. The results show that the artificial neural network can accurately recognize all kinds of patterns.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.403-405
• /
• 1997

In this paper, a navigation system based on fuzzy logic controllers is developed for a mobile robot in an unknown environment. The structure of this fuzzy navigation system features sensor system, fuzzy controllers for motion planning and the motion control system for real-time execution.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2856-2858
• /
• 2000

This paper proposes a scan code method for obstacle avoidance of mobile robot. Obstacles detected in a circular window are converted to scan codes and then to the steering angle. The safe rotating radius is obtained by the scan code to avoid the collision between robot and obstacle and. the minimum distance for rotation is calculated. Effectiveness of the method is illustrated through simulations, and the results show that the proposed method can be efficiently implemented to an unknown environment.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.123.2-123.2
• /
• 2003

The cellular mechanisms by which excess exposure to the excitatory neurotransmitter glutamate can produce neuronal injury are unknown. In this study, we found that glutamate induced cell death at IC (50) of 100 microM on the cultured human SH-SY5Y neuroblastoma cells. It has been hypothesized that glutamate excitotoxicity is related with the elevation of calcium (Ca) levels. To determine the dependence of glutamate neurotoxicity on Ca environment, extracellular (EDTA) and intracellular (BAPTA/AM) chelator were used. (omitted)

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.29-34
• /
• 1997

The prediction of detection range of a passive sonar system is essential to estimate the performance and to optimize the operation of a developed sonar system. In this paper, a model for the prediction of detection range in a range-dependent ocean environment based on the sonar equation is developed and tested. The prediction model calculates the transmission loss using PE propagation model, signal excess, and the detection probability at each target depth and range. The detection probability is integrated to give the estimated detection range. In order to validate the developed model, two cases are considered. One is the case when target depth is known. The other is the case when the target depth is unknown. The computational results agree well with the previously published results for the range-independent environment. Also,the developed model is applied to the range-dependent ocean environment where the warm eddy exists. The computational results are shown and discussed. The developed model can be used to find the optimal frequency of detection, as well as the optimal search depth for the given range-dependent ocean environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.450-456
• /
• 2006

Monte Carlo localization is known to be one of the most reliable methods for pose estimation of a mobile robot. Although MCL is capable of estimating the robot pose even for a completely unknown initial pose in the known environment, it takes considerable time to give an initial pose estimate because the number of random samples is usually very large especially for a large-scale environment. For practical implementation of MCL, therefore, a reduction in sample size is desirable. This paper presents a novel approach to reducing the number of samples used in the particle filter for efficient implementation of MCL. To this end, the topological information generated through the thinning technique, which is commonly used in image processing, is employed. The global topological map is first created from the given grid map for the environment. The robot then scans the local environment using a laser rangefinder and generates a local topological map. The robot then navigates only on this local topological edge, which is likely to be similar to the one obtained off-line from the given grid map. Random samples are drawn near the topological edge instead of being taken with uniform distribution all over the environment, since the robot traverses along the edge. Experimental results using the proposed method show that the number of samples can be reduced considerably, and the time required for robot pose estimation can also be substantially decreased without adverse effects on the performance of MCL.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.614-619
• /
• 2004

The line-of-sight (LOS) stabilization system is a precision electro-mechanical gimbals assembly for rejecting vibration to isolate the load from its environment and point toward the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. To generate movement commands for the actuators in the stabilization system, the control system uses a sensor of angular rotation. The controller is a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated using the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. And SMCPE (sliding mode control with perturbation estimation) is used to control the gimbals. SMCPE provides robustness of the control against the modeling deficiencies and unknown disturbances. In order to compare the performance of SMCPE with the classical SMC, a sample test result is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.576-584
• /
• 2002

This paper proposes a new denosing method using wavelet packet, to reject unknown external noise and white gaussian ambient noise for measuring the transient noise which is one of the important elements for ship classification. The previous denosing method applied the same wavelet threshold at each node of multi-single sensors for rejecting white noise is not adequate in the underwater environment existing lots of external noises. The proposed algorithm of this paper applies a modified soft-threshold to each node according to the discriminated threshold so as to reject unknown external noise and white gaussian ambient noise. It is verified by numerical simulation that the SNR is increased more than 25㏈. And the simulation results are confirmed through sea-trial using multi-single sensors.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.225-230
• /
• 1992

In this paper, a new learning fuzzy logic controller(LFLC) is presented. The proposed controller is composed of the main control part and the learning part. The main control part is a fuzzy logic controller(FLC) based on linguistic rules and fuzzy inference. For the learning part, artificial neural network(ANN) is added to FLC so that the controller may adapt to unknown plant and environment. According to the output values of the ANN part, which is learned using error back-propagation algorithm, scale factors of the FLC part are determined. These scale factors transfer the range of values of input variables into corresponding universe of discourse in the FLC part in order to achieve good performance. The effectiveness of the proposed control strategy has been demonstrated through simulations involving the control of an unknown robot manipulator with load disturbance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1232-1239
• /
• 2009

This paper proposes an exploration strategy to efficiently find a specific place in large unknown environments with wall-following based path planning. Many exploration methods proposed so far showed good performance but they focused only on efficient planning for modeling unknown environments. Therefore, to successfully accomplish the room finding task, two additional requirements should be considered. First, suitable path-planning is needed to recognize the room number. Most conventional exploration schemes used the gradient method to extract the optimal path. In these schemes, the paths are extracted in the middle of the free space which is usually far from the wall. If the robot follows such a path, it is not likely to recognize the room number written on the wall because room numbers are usually too small to be recognized by camera image from a distance. Second, the behavior which re-explores the explored area is needed. Even though the robot completes exploration, it is possible that some rooms are not registered in the constructed map for some reasons such as poor recognition performance, occlusion by a human and so on. With this scheme, the robot does not have to visit and model the whole environment. This proposed method is very simple but it guarantees that the robot can find a specific room in most cases. The proposed exploration strategy was verified by various experiments.