• The Journal of Society for e-Business Studies
• /
• v.23 no.3
• /
• pp.51-64
• /
• 2018

Recently, the magnitude and frequency of the natural disaster have been increased, the damage has become severer. The importance of disaster response system to relieve the damage has arised continuously. This study has tried to develop the algorithm to solve the facility location and size problem in emergency logistics. A facility in the emergency logistics has various roles in victim care, casualty treatment, relief resource management and relief vehicle assistance. Moreover, the location of facility in emergency logistics has to consider the safety and reliability. To gather these information, information management system with IoT sensors are suggested. The location problem in this study also covers various features to response various demands in disaster. To solve this problem, this study suggested MIP based algorithm. Scenario based simulation experiments are conducted to verify the performance suggested algorithm.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.2
• /
• pp.27-35
• /
• 2019

Purpose: This study is to address the spacial composition of a standard ward and bedroom size for sake of infection control and efficient medical service. Methods: Spacial composition of a standard ward has been proposed by comparative analysis of 5 big hospitals' wards. Bedroom sizes have been explored on the ground of Health care facility regulations from Korea, USA, Australia and Canada. Of course, Literature and field survey have been conducted in order to draw out various bedroom sizes. Results: 16 basic and some other additional spaces have been proposed for the composition of hospital standard ward. Area of Single bedroom is $11.6m^2$, and that of multi-beded room is $7.4m^2$. Bed to bed Clearance is 1.5m, spacing between bedsize and hard wall is 0.9m in 1~2 beded room, 0.75m in 4-beded room. Space clearance between Foot side of bed and curtain is proposed as 0.3m and additional 0.9m is necessary for the circulation. Implications: The result of this study can be applied to the new cons.

• ALGAE
• /
• v.30 no.4
• /
• pp.275-280
• /
• 2015

Coolia santacroce is a newly described epibenthic dinoflagellate species collected from the U.S. Virgin Islands. The original description indicates this species is unique from others in the Coolia monotis complex due to the relative size of the apical pore complex, broad range of pore sizes, and ribosomal DNA. The original description was done based on the isolation and cultivation of one isolate of the organism. In this study, we report three more isolates of Coolia santacroce collected from the Bahamas. Morphological observations were made using scanning electron microscopy that do not correspond to those from the original description, indicating the variability of the morphological features. However, analysis of the D1 / D2 regions of the large subunit rDNA places the three strains in a strongly supported monophyletic clade with the type specimen.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.537-541
• /
• 2003

The synchronization of production-delivery artivities is one of crucial factors to get competitive collaboration benefits between the manufacturer and the retailor(s). There were several researches to study on He optimal delivery policy to minimize the total cost of integrated system of both manufacturer and retailor(s). In this research, we investigate the joint optimal shipment policy in case that a manufacturer produces multiple products sharing a single production facility in the manufacturer side and retailor(s) deploys JIT delivery pattern with equal-size shipment policy. We formulate this problem as a form of 'Common Cycle Approach' in classical ELSP (Economic Lot Scheduling Problem) and provide simple optimal solution procedure.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.603-608
• /
• 2011

According to the labor related data from Korea Occupational Safety & Health Agency, accident victims of construction industry are increasing 6% annually since 2006. The major reason why the rate of accidents increases in Korea is that lots of labor working with another trades works simultaneously in various type of works. This study analyzes the current accident status in view of the type of building, type of works, and project size for the latest 3 years (2007~2009). As a result, 'single family & semi-detached houses' has the largest number of accidents among buildings. In addition, 'finishing work' shows the highest number in terms of work type. For the size, accidents occurred much for 'less than 300 million'. The results of this study can be used to focus on managing the highly hazardous area where the construction accidents mostly occur; therefore, it is anticipated to contribute to improve efficiency of safety management.

• Journal of Families and Better Life
• /
• v.9 no.1 s.17
• /
• pp.241-257
• /
• 1991

The objectives of this study are : to measure the level of rent burden. to examine the independent influences of the variables related to rent burden. to measure the level of family economic problem perception. to examine the differences in the level of family economic problem perception due to rent burden, household characteristics, housing characteristics and rent incresing. For these purpose, a survey is conducted using questionaires. The data used in this study included 369 renters living in Seoul. Statistics uses for data analysis were Frequency Distribution. Percentile, men, Pearson's Correlation, Partial Correlation, One-way ANOVA, Breakdown and Multiple Regression Analysis. Major findings are as follows : The average score of rent burden was 35.87, Therefore rent burden of large cities, rental households is very heavy. Family income, housing facility quality, rent type, and rent incresing have independent influences on rent burden. The average of family economic problem perception is above the mid-point of the scale. The level of family economic problem perception differs due to rent burden, family income, family life cycle, family size, occupation of household head, education leval of household head and homemaker, rent type, housing type, housing size, housing facility quality and rent increases. If the level of rent burden is below 25, family economic problem perception is adequate.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.54-61
• /
• 2015

A series of CFD calculation has been conducted to investigate the effect of facility confinement on explosion power for process plant facility. The level of confinement of a facility was simplified with VBR(volume blockage ratio) and averaged size of obstacles. FLACS which is 3D CFD code of gas dispersion and the explosion was used for simulating the explosion phenomena in the idealized domain with different confinement level. The CFD results showed a tendency that the overpressure increases with increasing VBR and number of obstacles. The effect of VBR on the overpressure was relatively small for the case of number of obstacle less than 25. The results of this study can be used to provide a safety guideline considering the facility confinement in case of leakage accident of flammable gas and vapor in process plants.

• Microbiology and Biotechnology Letters
• /
• v.51 no.3
• /
• pp.306-308
• /
• 2023

This research presents the whole-genome sequence of Enterobacter asburiae strain IK3, which was isolated from the rhizosphere soil of soybean (Glycine max). The genome of the strain is composed of a single chromosome with 4 plasmids, total size of 5,084,040 bp, and the GC content is 55.5%.

• Journal of East-West Nursing Research
• /
• v.26 no.1
• /
• pp.28-38
• /
• 2020

Purpose: The aim of this study was to provide information on the extent and variations of elderly residents' nursing care needs, and provision of nursing care across long term care facilities. Methods: A nationwide survey was conducted on nurse managers from 1,041 long term care facilities, by e-mail or fax, from August 16 to September 30 in 2017. A self-reported questionnaire consisting of 5 domains was used to collect data. Results: Facilities with more than 30 residents were more likely to need skilled nursing services and to obtain the nursing staff such as a registered nurse and a nurse's aide. Awareness and satisfaction of hospital-based home nursing care was high in all facilities. In addition, there are some differences in nurse managers' perceptions of the level of healthcare resources and required action by facility size. Nurse managers of senior congregate housings were more likely to have considerable difficulty in dealing with healthcare needs of residents and recognizing the healthcare resource shortage. A majority of nurse managers agreed on the need to employ a registered nurse. Conclusion: This study confirmed that it is essential to increase nurse staffing level and to reform the long term care insurance for enhancing the accessibility of healthcare services, especially for the residents in small long term care facilities. There is also a need to provide diverse education and training opportunities for nursing staff working in long term care facilities.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.842-848
• /
• 2018

Motivated by reducing the uncertainties in quantification of debris bed coolability, this paper reports an experimental study on two-phase flow resistances and interfacial drag in packed porous beds. The experiments are performed on the DEBECO-LT (DEbris BEd COolability-Low Temperature) test facility which is constructed to investigate the adiabatic single and two phase flow in porous beds. The pressure drops are measured when air-water two phase flow passes through the porous beds packed with different size particles, and the effects of interfacial drag are studied especially. The results show that, for two phase flow through the beds packed with small size particles such as 1.5 mm and 2 mm spheres, the contribution of interfacial drag to the pressure drops is weak and ignorable, while the significant effects are conducted on the pressure drops of the beds with bigger size particles like 3 mm and 6 mm spheres, where the interfacial drag in beds with larger particles will result in a descent-ascent tendency in the pressure drop curves along with the fluid velocity, and the effect of interfacial drag should be considered in the debris coolability analysis models for beds with bigger size particles.