• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1074-1076
• /
• 2000

This Paper reports on an experimental and theoretical work about self exited Half-Bridge inverter for contact less battery chargers. The steady state characteristics of inverter are analysis and the experimental result for 500kHz, universal AC source input have been obtained. These inverter is suitable for the portable appliances with battery chargers such as cellular phone.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.139-144
• /
• 2023

토크, 효율 등 전동기의 최대특성을 얻기 위해 모든 전동기는 각 전동기 특성에 맞게 설계된 범용인버터를 기본적으로 사용한다. 그러나 최근 연구 결과들을 살펴보면 BLDC 범용인버터인 6-스위치 인버터를 이용한 SRM 구동 연구, 3상 BLDC 전동기를 4-스위치 인버터를 이용한 구동 연구사례들을 살펴볼 수 있다. 따라서 기존 범용인버터에서 벗어나 각 전동기를 구동할 시킬 수 있는 구동 및 제어에 대한 여러 방법에 대해 접근하여 연구 방법들을 모색할 수 있다. 이러한 연구 경향에 맞춰 본 논문에서는 SRM 구동용 컨버터인 C- dump 형태의 컨버터를 BLDC 전동기의 구동 드라이버로 적용하여 이에 대한 특성과 가능성에 관해 연구하였다.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.596-601
• /
• 2022

최근 친환경 선박 전환 추세에 따라 EGR 시스템 적용이 증가되고 있다. EGR 시스템의 주요 부품 중 하나인 EGR 블로워는 공력시스템과 이를 구동하는 e-모터 및 인버터 등으로 구성되며, 에너지밀도가 높고 효율 특성이 우수한 영구자석형 동기전동기가 적용되고 있다. 한편, EGR 블로워용 모터의 경우 국내 중소조선기자재 기업들의 개발이 활발하지만, 선박에 탑재되는 인버터는 까다로운 선급인증을 획득해야 되므로 주로 글로벌 선진기업에서 개발한 범용 인버터가 사용되고 있다. 범용 인버터는 자가 튜닝 등 편리한 구동 기능을 갖고 있지만, 최적 제어 실패 시, 사용자 입장에서 원인을 분석하기 어려운 단점이 있다. 본 연구에서는 EGR 블로워용 SPMSM의 최적제어를 위한 전류 벡터 제어 및 Tracking observer를 설계 및 검증하여 범용 인버터의 최적제어 실패원인을 분석하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.76-80
• /
• 2004

This paper describes a load simulator with power-recovery capability, which is based on the voltage source converter-inverter set. The load simulator described in this paper can save the electric energy that should be consumed to test the operation and performance of the distributed generation system and the power quality compensator. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. The load simulator can be widely used in the lab to test the performance of the distributed generation system and the power quality compensator.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권4호
• /
• pp.181-187
• /
• 2005

This paper describes a load simulator with power-recovery capability, which is based on the voltage source converter-inverter set. The load simulator described in this paper can save the electric energy that should be consumed to test the operation and performance of the distributed generation system and the power quality compensator. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. The load simulator can be widely used in the lab to test the performance of the distributed generation system and the power quality compensator.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.830-840
• /
• 2015

The H-bridge inverter is the fundamental power cell of the cascaded distribution static synchronous compensator (DSTATCOM). Thus, cell reliability is important to the compensation performance and stability of the overall system. The concept of the power electronics building block (PEBB) is an ideal solution for the power cell design. In this paper, an H-bridge inverter-based “plug and play” HPEBB is introduced into the main circuit and the controller to improve the compensation performance and reliability of the device. The section that discusses the main circuit primarily emphasizes the design of electrical parameters, physical structure, and thermal dissipation. The section that presents the controller part focuses on the principle of complex programmable logic device -based universal controller This section also analyzes typical reliability and anti-interference issues. The function and reliability of HPEBB are verified by experiments that are conducted on an HPEBB test-bed and on a 10 kV/± 10 Mvar DSTATCOM industrial prototype.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2129-2138
• /
• 2016

The full-bridge inverter, widely used for single-phase photovoltaic grid-connected applications, presents a leakage current issue. Therefore, an AC bypass branch is introduced to overcome this challenge. Nevertheless, existing modulation strategies entail drawbacks that should be addressed. One is the zero-crossing distortion (ZCD) of the AC current caused by neglecting the AC filter inductor voltage. Another is that the system cannot deliver reactive power because the AC bypass branch switches at the power frequency. To address these problems, this work proposes an optimized hybrid modulation strategy. To reduce ZCD, the phase angle of the inverter output voltage reference is shifted, thereby compensating for the neglected leading angle. To generate the reactive power, the interval of the negative power output is calculated using the power factor. In addition, the freewheeling switch is kept on when power is flowing into the grid and commutates at a high frequency when power is fed back to the DC side. In this manner, the dead-time insertion in the high-frequency switching area is minimized. Finally, the performances of the proposed modulation strategy and traditional strategies are compared on a universal prototype inverter. Experimental results validate the theoretical analysis.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.220-233
• /
• 2019

This work aims to study and analyze the various operating modes of universal power converter which is powered by solar and thermoelectric generators. The proposed converter is operated in a DC-DC (buck or boost mode) and DC-AC (single phase) inverter with high efficiency. DC power sources, such as solar photovoltaic (SPV) panels, thermoelectric generators (TEGs), and Li-ion battery, are selected as input to the proposed converter according to the nominal output voltage available/generated by these sources. The mode of selection and output power regulation are achieved via control of the metal-oxide semiconductor field-effect transistor (MOSFET) switches in the converter through the modified stepped perturb and observe (MSPO) algorithm. The MSPO duty cycle control algorithm effectively converts the unregulated DC power from the SPV/TEG into regulated DC for storing energy in a Li-ion battery or directly driving a DC load. In this work, the proposed power sources and converter are mathematically modelled using the Scilab-Xcos Simulink tool. The hardware prototype is designed for 200 W rating with a dsPIC30F4011 digital controller. The various output parameters, such as voltage ripple, current ripple, switching losses, and converter efficiency, are analyzed, and the proposed converter with a control circuit operates the converter closely at 97% efficiency.

• 전기전자학회논문지
• /
• 제13권3호
• /
• pp.47-54
• /
• 2009

Design consideration on electric drivetrain(E-D/T), usually referred as electric motor for driving, its compatible reduction gear, and inverter, are performed for developing electric vehicle(EV) with efficient driving performance. Universal mode of driving cycle has been used to make up the actual vehicle performance, and its results are incorporated to the design of E-D/T.

• 전력전자학회논문지
• /
• 제12권1호
• /
• pp.89-97
• /
• 2007

본 논문에서는 새로 개발된 전력품질 보상장치의 성능을 실험실에서 효과적으로 분석하기 위해 필요한 새로운 부하모의장치를 제안하였다. 제안하는 부하모의장치는 2대의 PWM 인버터가 직류 단을 공유한 구조로 선형과 비선형부하를 단일기기로 시험 가능하도록 설계되어 있다. 그리고 전력품질보상기의 하나인 능동전력필터와 연계시험을 수행하였다. 본 논문에서는 제안하는 부하모의장치와 능동전력필터의 연계 특성을 분석할 목적으로 PSCAD/EMTDC 소프트웨어를 이용하여 시뮬레이션 실시하였고 또한 실적용시 타당성을 검증할 목적으로 20kVA 용량의 부하모의장치와 10kVA용량의 능동전력필터를 제작하여 실험을 실시하였다. 시뮬레이션과 하드웨어 실험결과 제안하는 부하모의장치는 능동전력필터의 다양한 보상 능력 검증에 충분히 활용가능함을 알 수 있었다.