• Earthquakes and Structures
• /
• 제19권6호
• /
• pp.459-469
• /
• 2020

An external prestressed steel-bar truss unit was developed as a new strengthening technology to enhance the seismic performance of an in-plane masonry wall structure while taking advantage of the benefits of a prestressed system. The presented method consists of six steel bars: two prestressed vertical bars to introduce a prestressing force on the masonry wall, two diagonal bars to resist shear deformation, and two horizontal bars to maintain the configuration. To evaluate the effects of this new technique, four full-scale specimens, including a control specimen, were tested under combined loadings that included constant-gravity axial loads and cyclic lateral loads. The experimental results were analyzed in terms of the shear strength, initial stiffness, dissipated energy, and strain history. The efficiency of the external prestressed steel-bar truss unit was validated. In particular, a retrofitted specimen with an axial load level of 0.024 exhibited a more stable post behavior and higher energy dissipation than a control specimen with an observed complete sliding failure. The four vertical bars of the adjacent retrofitting units created a virtual column, and their strain values did not change until they reached the peak shear strength. The shear capacity of the masonry wall structure with external prestressed steel-bar truss units could be predicted using the model suggested by Yang et al.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.519-533
• /
• 2024

Many materials including cementitious concrete-type materials undergo material property changes during high-rate loading. There is a wealth of research regarding this phenomenon for concrete in compression and tension. However, there is minimal knowledge about how mortar material used in concrete masonry unit (CMU) construction behaves in high-rate shear loading. A series of experiments was conducted to examine the bond strength of mortar bonded to CMU units under high-rate shear loading. A novel experimental setup using a shock tube and dynamic ram were used to load specially constructed shear triplets in a double lap shear configuration with no pre-compression. The Finite Element Method was leveraged in conjunction with data from the experimental investigation to establish if the shear bond between concrete masonry units and mortar exhibits any rate dependency. An increase in shear bond strength was observed when loaded at a high strain rate. This data indicates that the CMU-mortar bond exhibits a rate dependent strength change and illustrates the need for further study of the CMU-mortar interface characteristics at high strain rates.

• 전자통신동향분석
• /
• 제39권1호
• /
• pp.62-73
• /
• 2024

Artificial intelligence relies on data-driven analysis, and the data processing performance strongly depends on factors such as memory capacity, bandwidth, and latency. Fast and large-capacity memory can be achieved by composing numerous high-performance memory units connected via high-performance interconnects, such as Compute Express Link (CXL). CXL is designed to enable efficient communication between central processing units, memory, accelerators, storage, and other computing resources. By adopting CXL, a composable computing architecture can be implemented, enabling flexible server resource configuration using a pool of computing resources. Thus, manufacturers are actively developing hardware and software solutions to support CXL. We present a survey of the latest software for CXL memory utilization and the most recent CXL memory emulation software. The former supports efficient use of CXL memory, and the latter offers a development environment that allows developers to optimize their software for the hardware architecture before commercial release of CXL memory devices. Furthermore, we review key technologies for improving the performance of both the CXL memory pool and CXL-based composable computing architecture along with various use cases.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2006년도 추계학술대회
• /
• pp.379-386
• /
• 2006

The purpose of this paper is to analyze the implementation of the GIS infrastructure systems for the u-City, GIS base u-City represents spatial information derived fields, such as geographical distribution of the urban boundaries, physical configuration of the urban locations and cultural characteristics of the urban history. These three aspects relate to urban infrastructure systems implementation, urban monitoring center implementation, and spatial database implementation. In terms of the GIS based u-Ci쇼 urban infrastructure implementation systems, the u-City depends on IT contents and spatial features. IT contents are strongly related to IT839 strategy due to the national agenda is "u-Korea". GIS should contribute to u-City construction through the spatial analyses methods. For these methods various GIS functions will guide to u-City's distribution, location, and characteristics of urbanization. The infrastructure consists of road and road facilities, underground facilities, related agencies facilities, dispatch systems, environmental systems, and urban planning. These six units of the urban infrastructures have spatial databases that consist of spatial configuration, such as dots, lines, and polygons in order to draw the spatial distribution of the u-City GIS based u-City urban infrastructure implementation systems should deal with It convergence to generate fusion affects.

• 대한한의학방제학회지
• /
• 제21권2호
• /
• pp.121-132
• /
• 2013

Objectives : The objectives of this study is to establish data-base to find out similar herbal formulas with a particular herbal formula by comparing composition ratio of configuring herbs. And this thesis is to analyze differences of prescriptions and find out similar prescriptions by utilizing galenical mass ratio, which is directly related to effectiveness of galenical. Methods : This study was proceeded by using Access 2007 with Window 7(MS) and 2,787 prescriptions of which herbal configuration could be indicated by weight unit were analysed from Donguibogam. We standardize all units of the prescription and input the mass ratio data when entered galenical data. Results : We could confirm a degree of similarity between compared prescriptions and a particular prescription according to the sum of differences of herb weight ratio and similarity ratio. Conclusions : A most similar herbal formula could be searched through comparing multi prescriptions by multi prescriptions of herbal configuration from established herbal formula data-base where herb weight ratio of prescriptions is to be input.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.55-64
• /
• 2018

Purpose: The ward division is a representative part of the hospital, where a variety of user activities are performed. Users can be broadly categorized as patients and carers, visitors, and medical staff (doctors and nurses). The relationship between these two is a major issue with ward planning as the patient's place of life centers around the hospital room and the task of the clinical workforce centers around the nursing station (NS). Against this backdrop, the study divides the ward units of the General Hospital of China into patient areas, medical team areas, supply areas, and public domain, with the focus on the ward areas affecting most significantly in the hospital patients. Methods: The theoretical advance studies of the standard ward unit are identified by the associated guidelines, articles, and documentation. Results: This study is a summary analysis of relevant regulations, reference literature, and drawing data from the target hospital. Further work is expected to be undertaken, including further surveys and observational surveys, to produce more detailed results. Implications: It is expected that the research in this paper will provide an effective reference for the future research of China General Hospital Ward department, so as to promote and improve the work system of China General Hospital Ward department.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.45-54
• /
• 2018

Purpose: China is increasingly paying more attention to mental illness as the number of people with mental illness increases rapidly. However, the design of a specialized psychiatric hospital is rarely studied. The purpose of this study is to analyze the spatial composition and the required area of psychiatric hospitals for the efficient design of psychiatric hospitals in China. In particular, we will analyze the space composition and present basic data for the future design of the Chinese psychiatric hospital space composition. Methods: This study examined the theories and related literature, and analyzed the plans of Chinese psychiatric hospital. Results: The results of the study are as follows. First, the spatial composition and area were analyzed. Second, the units of medical team, patient, supplies, and common area were analyzed by perspective of function, arrangement and composition. Third, based on the results of the analysis, considerations for the planning of Inpatient department were presented. Implications: This study will help improve the environment of Chinese psychiatric hospitals and provide basic data for the design of the Inpatient department of psychiatric hospital in China.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1769-1777
• /
• 2018

This paper proposes a method for optimal placement of Phasor Measurement Units (PMUs) considering system configuration and its attributes during the planning phase of PMU deployment. Each bus of the system is assessed on four diverse attributes; namely, redundancy of measurements, rotor angle and frequency monitoring of generator buses, reactive power deficiency, and maximum loading limit under transmission line outage contingency, and a consolidated 'degree of criticality' is determined using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The major contribution of the proposed work is the development of modified objective function which incorporates values of the degree of criticality of buses. The problem is formulated as maximization of the aggregate degree of criticality of the system. The resultant PMU configuration extends complete observability of the system and majority of the PMUs are located on critical buses. As budgetary restrictions on utilities may not allow installation PMUs even at optimal locations in a single phase, multi-horizon deployment of PMUs is also addressed. The proposed approach is tested on IEEE 14-bus, IEEE 30-bus, New England (NE) 39-bus, IEEE 57-bus and IEEE 118-bus systems and compared with some existing methods.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1034-1041
• /
• 2007

본 논문은 저압 감시 기능을 포함하는 개선된 배전자동화시스템 개발에 관한 연구 결과를 소개한 것으로서 연구배경, 시스템 구성, 설계, 시제품 제작, 시험 및 실계통 시범운영 등 전반적인 사항을 설명한다. 개발 시스템은 배전현장에서 별도로 수행 중인 변압기 부하감시, 전압감시 및 정전감시 및 품질감시 업무를 배전자동화시스템에 통합하여 운영함으로써 보다 경제적이고 효율적인 배전망의 운영을 위하여 개발되었다. 시스템 통합을 위한 통신망은 간선망과 지선망을 갖도록 계층적으로 구성하고, 변압기 부하 측의 저압 감시를 위한 단말장치를 새로 개발하였다. 또한, 기존 배전자동화시스템에 저압 감시 기능을 추가하기 위하여 주장치 소프트웨어를 개선하였다. 개발 시스템은 실계통 시범운영을 통하여 설계 및 성능이 검증되었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제30권2호
• /
• pp.23-34
• /
• 2024

Purpose: The Hybrid care environment, combining interventional procedures and surgeries in one space, is crucial for managing complex diseases, responding to emergencies, and reducing recovery times and pain. This study provides foundational data for creating architectural guidelines for a Hybrid Operating Unit in a general hospital's surgical department, focusing on cardiovascular care. Methods: The study analyzed the spatial and configuration types of the Vascular Angiography Unit and the Cardiac Operating Unit, which are the basic components of the Hybrid Operating Unit, through a literature review. Based on the initial research findings, interviews with experts were conducted. Results: In the Hybrid Operating Process, the study proposed spatial configuration alternatives that consider the positioning of medical staff and the types and arrangement changes of equipment, including Angiography, Heart-lung machines, and other surgical tools and instruments. Implications: The integration of the two units leads to increased diversity and demand for medical staff, equipment, and supplies during surgical and interventional procedures. Therefore, strategic spatial configurations and equipment placement are necessary to effectively respond to these needs.