• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.178.2-178
• /
• 2001

Today, many electronic devices and ECUs (Electronic Control Units) are used in the automotive body control systems. It becomes more common that these devices exchange data with others through an in-vehicle network. Automobile manufacturers concentrate their efforts on development of body control systems based on networks in order to save cost and to increase flexibility and safety. OSEK/VDX has been founded as a joint project in German and French automotive industry aiming at an industry standard for an open-ended architecture for distributed control units in vehicles OSEK/VDX consists of Communication (specification of data exchange within and between control units), Network Management specification of Configuration determination and monitoring and Operating System (specification of realtime executive for ECU software ...

• Journal of the military operations research society of Korea
• /
• v.25 no.1
• /
• pp.87-106
• /
• 1999

There are many technical datum in related with design, test & evaluation and logistic support which will be exchanged between geographically isolated units and heterogeneous hardwares & softwares in developing and operating the weapon systems. The paper proposes the conceptual database schema to establish configuration management information systems in which these datum can be automatically interchanged, tracked, audited and status-accounted without errors under the various environments. The paper investigates how to identify and classify the data in accordance with document identification, task analysis, system development, logistic support, system test & evaluation and data management. Furthermore, the investigation includes drawing the subject areas and modeling the conceptual database schema to explain the relationships between these datum. Thus, the paper results in the conceptual framework and data models of configuration management information systems, while additional customization efforts be required in applying the models to a specific weapon systems R&D.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.130-138
• /
• 2023

The Smart grids are considered as multi-disciplinary power systems where the communication networks are highly employed. This paper presents optimal wide area measurement system (WAMS) configuration in Nordic power system. The transition from SCADA to WAMS becomes now trend in all power systems to ensure higher reliability and data visibility. The optimization applied in this research considered the geographical regions of the Nordic power system. The research considered all the devices of WAMS namely phasor measurement units (PMUs), phasor data concentrators (PDCs) and communication links. The study also presents two scenarios for optimal WAMS namely base case and N-1 contingency as different operating conditions. The result of this research presents technical and financial results for WAMS configuration in a real power system. The optimization results are performed using MATLAB 2017a software application.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.4
• /
• pp.87-95
• /
• 2016

Purpose: Recently an experience in the MERS crisis focused on the importance of infection control in hospitals. According to Korean National healthcare-associated Infection Surveillance System (KONIS) of the KSICP, a great number of 498 people, 841 people, and 1021 people were infected by pneumonia, urinary tract infection, and bacteremia respectively from 94 hospital ICUs during the year of 2014. Therefore, the purpose of this study is to investigate the configuration and design guidelines for the ICU rooms to minimize the nosocominal infections. Methods: Based on the several infection control guidelines and revised Medical Law, consequent analyses which classified the planning and operational behavior in the ICUs of seven hospitals, were performed to reduce the cross-infection. Results: The results of this study are offering a space, configuration and design guidelines for effective infection control in the intensive care units through the unit-bed area, the bed-to-bed distance, the isolation room, etc. Implications: It is expected that this study propose the direction of architectural planning and guideline for the ICU room in order to realize the intension of revised Medical Law.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2419-2425
• /
• 2007

New poly(cyclopenta[def]phenanthrene) (PCPP)-based conjugated copolymers, containing carbazole units as pendants, were prepared as the electroluminescent (EL) layer in light-emitting diodes (LEDs) to show that most of them have higher maximum brightness and EL efficiency. The prepared polymers, Poly(2,6-(4-(6-(Ncarbazolyl)- hexyl)-4-octyl-4H-cyclopenta[def]phenanthrene)) (CzPCPP10) and Poly(2,6-(4-(6-(N-carbazolyl)- hexyl)-4-octyl-4H-cyclopenta[def]phenanthrene))-co-(2,6-(4,4-dioctyl-4H-cyclopenta[def]phenanthrene)) (CzPCPP7 and CzPCPP5), were soluble in common organic solvents and used as the EL layer in light-emitting diodes (LEDs) of configuration with ITO/PEDOT/polymer/Ca/Al device. The polymers are thermally stable with glass transition temperature (Tg) at 77-100 °C and decomposition temperature (Td) at 423-457 °C. The studies of cyclic voltammetry indicated same HOME levels in all polymers, although the ratios of carbazole units are different. In case of PLEDs with configuration of ITO/PEDOT/CzPCPPs/Ca/Al device, The EL maximum peaks were around 450 nm, which the turn-on voltages were about 6.0-6.5 V. The maximum luminescence of PLEDs using CzPCPP10 was over 4400 cd/m2 at 6.5 V, which all of the maximum EL efficiency were 0.12 cd/A. The CIE coordinates of the EL spectrum of PLEDs using CzPCPP10 was (0.18, 0.08), which are quite close to that of the standard blue (0.14, 0.08) of NTSC.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.101-108
• /
• 2019

The aim of this study was to verify differences in autonomic responses that are affected by the configurations of one-room type units using an electrocardiogram (ECG). Accordingly, 43 one-room units that were collected randomly were classified into ten different types of floor plan configurations mainly according to the location of the bathroom and kitchen. An ECG was subsequently measured for each plan type and the average ratio of the LF/HF (Power in low frequency range/Power in high frequency range) was calculated to measure the comfort level of each space. The results revealed a significant statistical difference between the average LF/HF ratio between the plan types (p < 0.05) and provided compelling evidence suggesting that the configuration of the plan may affect the quality of one-room space. This approach appears to be effective in counteracting stress that may exacerbate psychological disorders in single person households.

• International Journal of Reliability and Applications
• /
• v.12 no.1
• /
• pp.15-39
• /
• 2011

This paper deals with the reliability analysis of a complex system with three possibilities at the time of repair. The considered system consists of two subsystems A and Bin series configuration (1-out-of-2: F). Subsystem A has n units which are connected in series whereas subsystem B consists of n units in parallel configuration. The configuration of subsystem A is of 1-out-of-n: F whereas subsystem B is of k-out-of-n: D and k+1-out-of-n: F nature. System has three states: Good, degraded and failed. Supplementary variable technique has been used for mathematical formulation of the model. Laplace transform is being utilized to solve the mathematical equation. Reliability, Availability, M.T.T.F., Busy Period and Cost effectiveness of the system have been computed. The repairs from state $S_7$ to $S_0$, $S_8$ to $S_0$, $S_9$ to $S_0$ and $S_{11}$ to $S_0$ have two types namely exponential and general. Joint probability distribution of repair rate from $S_7$ to $S_0$, $S_8$ to $S_0$, $S_9$ to $S_0$ and $S_{11}$ to $S_0$ is computed by Gumbel-Hougaard family of copula. Some particular cases of the system have also been derived to see the practical importance of the model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.854-859
• /
• 2010

Distribution Automation System(DAS) is designed to improve operational efficiency by acquisition and control of remote data using its components such as central computation units, communication network and feeder remote terminal units. A conventional human machine interface of the DAS adopts a schematic diagram which is made by drawing power equipments on the geographic information system map. The single line diagram is more useful than the schematic diagram for the main tasks of distribution system operation such as protective relay coordination, service restoration and loss minimization. Since the configuration of the distribution line is changed according to the relocation of the open tie switches, the auto-drawing algorithm based on the connection between the sections and the switches is an essential technique. This paper proposes a new auto-drawing algorithm for a single line diagram of distribution systems based on tertiary tree and collision avoidance method. The feasibility of the proposed algorithm has been testified for various cases using practical distribution system with 12 feeders.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.95-110
• /
• 1995

n this research neural -based model was developed to forecast link travel times , And it is also compared wiht other time series forecasting models such as Box-Jenkins model, Kalman filter model. These models are validated to evaluate the accuracy of models with real time series data gathered by the license plate method. Neural network's convergency and generalization were investigated by modifying learning rate, momentum term and the number of hidden layer units. Through this experiment, the optimum configuration of the nerual network architecture was determined. Optimumlearining rate, momentum term and the number of hidden layer units hsow 0.3, 0.5, 13 respectively. It may be applied to DRGS(dynamic route guidance system) with a minor modification. The methods are suggested at the condlusion of this paper, And there is no doubt that this neural -based model can be applied to many other itme series forecating problem such as populationforecasting vehicel volume forecasting et .

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.57-62
• /
• 2006

The quality of precision spindle units (S/Us) running on rolling bearings depends strongly on their structural parameters, such as the configuration and geometry of the S/U elements and bearing preloads. When S/Us are designed, their parameters should be optimized to improve the performance characteristics. However, it is practically impossible to state perfectly a general criterion function for S/U quality. Therefore, we propose to use a multicriteria optimization based on the parameter space investigation (PSI) method We demonstrate the efficiency of the proposed method using the optimization results of high-speed S/Us.