• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.141-147
• /
• 2009

This paper reports on a study to increase the flexibility of previous TMDS(Train Monitoring and Diagnosis System) network communication in case of both multiple units and variable train sets. The previous TMDS network configuration has been applied using various field-BUS by the TMDS manufacturers using their own intrinsic method. But recently, there has been a demand for flexible train formations such as multiple units and variable train set formations, hence the TMDS had to be adapted to offer flexible network communication technology capability. Therefore, Hyundai-Rotem needed its intrinsic method of network configuration, and develop a network configuration method applicable to both multiple units and variable train set formations. The TMDS was integrated into the Irish Rail new Diesel Multiple Units from an early stage of the project and subsequently fully tested on a finished train.

• KIEAE Journal
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2012

This study aims at finding the trend changes of spatial configuration in housing units of Korean apartments in the 2000s. Among the housing units in the apartments built by large construction companies, we have selected ones with small and regular sizes, $59m^2$ and $84m^2$ respectively, and investigated the number of bays, the location of wet zone and the spatial flexibility in the housing units selected for analysis. In conclusion, the number of bays in the housing unit has gradually increased, after allowing for the structural change of the balcony in the legal. It is estimated that the trend has came from the intent to increase the numbers of the externally exposed surfaces of the balcony, ensure a good view, lighting, ventilation and spatial flexibility. The location of wet zone, water-needed space such as a bathroom or a kitchen, has changed in the direction to facilitate the expansion and modification of space. Variable range of space has gradually expanded by using the balcony and wet zone as much as possible. In order to configure more effectively spaces in housing environments, the future study should be implemented to develop tools for realizing sustainable housing environment at the levels of not only the housing unit. but also the entire building, housing site, and city.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.107-110
• /
• 1993

This paper presents the technical requirements and configuration of power demand control system in office building Generally, the peak power demand is occurred in cooling period. For power demand control in existing building, the most effective control points are the motors for air handling units.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1648-1656
• /
• 2018

The configuration of redundant inertial sensors are very important when considering navigation performance and fault detection and isolation (FDI) performance. By constructing a redundant sensor system using multiple inertial sensors, it is possible to improve the navigation performance and fault detection and isolation performance, which are highly related to the sensor configuration and allocation. In order to deploy multiple MEMS inertial measurement units effectively, a configuration and allocation methods considering navigation performance, fault detection and isolation performance, and lever arm effect in one plane are presented, and the performance is analyzed through simulation in this research. From the results, it is confirmed that the proposed configuration and allocation method can improve navigation, FDI, and lever arm effect rejection performances more effectively by more than 70%.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2016

After 2017 years, BWMS units must be installed in the existing ship as well as the new ship by the ballast water management convention. Software tools that can help automatically searching for BWMS installation space to avoid pipes and equipment in the engine room of the existing ship will be very useful in the BWMS layout design. In this study, voxel representation of scanned data is generated first to search space efficiently. Simplified voxel models of each unit are prepared to be located in the engine room space as well. Distance between connected models is calculated through the arrangement direction and position of each model. Sums of distance between connected models are compared for the optimal configuration. It is assumed that the sum of distance between connected models depicts the pipe usage. The proposed method can save the time needed for BWMS installation design and allows optimal configuration of BWMS units.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.381-389
• /
• 2010

Modern military equipments are often required to be mounted on a truck for their survivability and operation performance. Special units installed on the truck at times experience serious shock vibration caused by obstacles of road and/or uncommon road shape. It is then essential to analyze the travel performance of truck-mounted special units for their survivability and performance. In this paper, shock responses of the equipments subjected to bump passing and wash board road are experimentally obtained and also analyzed via FEM. Modified bump configuration and road profile considering the interface with tire are suggested. Analytical results considering this modification show good agreement with test results.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.399-410
• /
• 2012

Due to development of modern medical services and economics, people raised expectation and demand about medical services from previous disease treatment to comprehensive health care covering prevention and health care. Responses of each medical facility to these social needs and the evolution of concept of medicine rapidly occur. The health examination centers are being operated with the purpose of health examination and this trend is reflected on several aspects such as the size of the facilities, function and configuration of space in health examination centers. Thus, health examination centers consisting of various space systems appear, but this trend and interpretations are lacking. Therefore, the purpose of this study is to draw trends of system through analysis of types and its evolved space systematic analysis and establish it. Analysis targets were classified into small, medium and large groups by sizes based on number of space and a total of 12 health examination centers in four for each category were selected. As research methods, functional relationship of space was examined through analysis of type in which segmentalized type tools were applied in local units. The flow diagram was established based on direction turning point and was classified into sub-flow and main-flow in local units and the systems between local units were derived. Finally, the results of this study can be summarized as the following three results. 1) The space connection system of health examination center showed four systems such as circulation, independence, continuation, and network. 2) Local type indicators and global type indicators which were evolved more from limitation of type analysis tools in existing research were derived so that more systematic analysis could be made. 3) Network system is distributed approach system and space for each function is formed around public space.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.493-496
• /
• 2005

The PMU (Payload Management Unit) in MSC (Multi-Spectral Camera) is the main subsystem for the management, control and power supply of the MSC payload operation. The PMU shall handle the communication with the BUS (Spacecraft) OBC (On Board Computer) for the command, the telemetry and the communications with the various MSC units. The PMU will perform that distributes power to the various MSC units, collects the telemetry reports from MSC units, performs thermal control of the EOS (Electro-Optical Subsystem), performs the NUC (Non-Uniformity Correction) function of the raw imagery data, and rearranges the pixel data and output it to the DCSU (Data Compression and Storage Unit). The BUS provides high voltage to the MSC. The PMU is connected to primary and redundant BUS power and distributes the high unregulated primary voltages for all MSC sub-units. The PSM (Power Supply Module) is an assembly in the PMU implements the interface between several channels on the input. The bus switches are used to prevent a single point system failure. Such a failure could need the PSS (Power Supply System) requirement to combine the two PSM boards' bus outputs in a wired-OR configuration. In such a configuration if one of the boards' output gets shorted to ground then the entire bus could fail thereby causing the entire MSC to fail. To prevent such a short from pulling down the system, the switch could be opened and disconnect the short from the bus. This switch operation is controlled by the BUS.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.40-50
• /
• 2008

This article examined the applicability of spatial configuration to Escher's works through configurative logics and rules and studied the contrasting relations among the unit elements in Escher's works and their characteristics and the creative process of the characteristics. As the results of the study on the bases to maintain and create the partial elements revealed as the characteristics, it was shown that Escher's sequential transformative works demonstrated diverse expressive characteristics as a creative process of Inter-complementary contrasting relations based on the independence of the unit elements. It was also shown that the creative process of the unit elements was actualized through the maintenance base of the fixed and absolute characteristic as the logic for the creation and the creation base of the dynamic and relative characteristic. Therefore, it was interpreted that by applying the logics for creation to Escher's unit elements through the spatial interpretation of the maintenance base and the creation base as well as by configuring the units created in such a way according to the characteristics of Escher's works, spatial possibility canbe derived out from Escher's contrasting tessellation works. The process of spatial configuration is the process to make a balance between various conditions, artists own understanding of the space and his/her intention of the space. From this viewpoint, the logics for maintenance base and for creation base seem to have the potentiality as a spatial configuration to consistently meet the given conditions as well as to derive out novelty through the transformation to maintain the fixed and absolute condition(base) and the characteristics of the independent(additional) transformation arising together with the implicit relations among the transformative units.