• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.87-92
• /
• 2014

In spite of ICAO's effort to ensure the safety of flight operation by requiring crews, controllers, and other ground aviation staffs to use unified system for units, SI (System International of units), there are still many aircrafts designed, manufactured, and operated based on non-SI units, and many crew training in airline companies are also conducted based on non-SI. Due to this confusion of using different unit systems in international flight operation, many crew members and passengers are exposed to danger. International flights pilots may have confusion while flying different airspaces of different countries that use different unit systems, and this may cause human errors causing accidents and incidents. Due to these reasons, it is needed to establish the standards to reflect non-SI that many countries practically use to SI, which is international standard.

• Communications for Statistical Applications and Methods
• /
• v.22 no.5
• /
• pp.435-443
• /
• 2015

Two phase sampling design is useful to increase estimation efficiency using deep stratification, improved non-response adjustment and reduced coverage bias. The same sampling units are commonly used for the first and the second phases in complex two-phase sampling design. In this paper we consider a sampling scheme where the first phase sampling units are clusters and the second phase sampling units are list samples. Using selected clusters in first phase requires that we list up elements in the selected clusters from the first phase and then use the list as a secondary sampling frame for the second phase sampling design. Then we select second phase samples from the listed sampling frame. We suggest an estimator based on the complex two-phase sampling design with different sampling units of each phase. Also the estimated variances of the estimator obtained by using classic and replication variance methods are considered and compared using simulation studies. For real data analysis, 2010 Korea Farm Household Economy Survey (KFHES) and 2011 Korea Agriculture Survey (KAS) are used.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.380-384
• /
• 2002

For the screening of gamma-irradiated grains, domestic rice, glutinous rice, barley, and wheat were irradiated with 0.1, 0.3, 0.5, 0.7, and 1.0 kGy and screened using the DEFT/APC (Direct Epifluorescent Filter Technique/Aerobic Plate Count) method. The log DEFT/APT units increased with the dose increment in all samples, whereas the log APC unit decreased gradually. For rice, barley, and wheat, unirradiated and irradiated samples with below 0.3 kGy had 2.0 or lower logarithmic units, whereas those with 0.5 kGy or higher had 2.0 or higher logarithmic units. For glutinous rice, the sample irradiated with 0.5 kGy showed 1.92 logarithmic unit and those with 0.7 kGy or higher had 2.0 or higher logarithmic units. These results suggest that if the grains show 2.0 or higher logarithmic units, they could be assumed to have been irradiated at a dose level of at least 0.5 kGy. In conclusion, grains could be easily screened through the DEFT/APC method.

• Journal of Korean Clinical Nursing Research
• /
• v.25 no.1
• /
• pp.98-105
• /
• 2019

Purpose: The study was conducted to investigate correlation between professionalism, organizational communication the and patient safety culture of nurses in hemodialysis units and verify factors that affect patient safety culture. Methods: Data were collected from 109 nurses working in hemodialysis units located in Seoul and Gyeonggi-do. collected data were analyzed using descriptive statistics including t-test, one-way ANOVA, Pearson correlation coefficient and stepwise multiple regression with the SPSS 21.0 program. Results: The Professionalism of participants was significantly correlated with patient safety culture while the Organizational communication was also correlated with patient safety culture. Factors influencing participants' patient safety culture included professionalism, organizational communication, employment history in current hospital, and the number of patients per nurse. These factors explained 57.8% of patient safety culture. Conclusion: The research findings suggest that in order to increase the awareness of patient safety culture of nurses in hemodialysis units, strategic efforts are needed to enhance professionalism and organizational communication satisfaction of nurses in hemodialysis units.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.262-268
• /
• 1996

Flow properties of all suspensions are controlled by their flow units. The factors effecting on the flow units are the characteristics of the particle itself (surface properties, particle sizes, particle shapes and etc.), the electrostatic interactions among the particles and the influences of the medium in the suspensions. Here, we studied the transition between the flow units with shear rate which can be added to the above factors. For the concentrated starch-water suspensions, by using the Couette type rotational viscometer, we confirmed that at low shear rate, dilatancy is appeared, but it is transformed to thixotropy with increasing shear rate. In order to explain this fact, we derived the following flow equation, representing the transition from dilatancy to thixotropy with shear rate, by assuming the equilibrium between the flow units. f = X1β1s./α1 + 1/(1+Kexp(c0s.2/RT))((1-X1)/α2)sinh-1{(β2)0 s. exp(c2s.2/RT)} + K exp(c0s.2/RT)/(1+K exp(c0s.2/RT))((1-X1)/α3)sinh-1{(β3)0 s. exp(-c3s.2/RT)} By applying this flow equation to the experimental flow curves for the concentrated starch-water suspensions, the flow parameters were obtained. And, by substituting the obtained flow parameters to the flow equation, the theoretical flow curves were reproduced. Also, Ostwald curve was represented by applying the flow equation, and the applicability for stress relaxation was discussed.

• Educational Technology International
• /
• v.19 no.2
• /
• pp.175-197
• /
• 2018

Flipped classroom (FC) has gained attention as an active learning approach. Designing effective out-of-class activities to help prepare students for in-class activities is fundamental for successful implementation of FC. This study investigated the effectiveness of Goal-Based Scenarios (GBS) for out-of-class learning in FC. Four out of twelve units in a medical humanities course for Year 2 medical students was redesigned into a FC format, where e-learning modules were designed using a GBS approach for out-of-class activities and classroom debates were implemented for in-class activities. The other eight units were delivered in a conventional classroom debate format, which included reading text materials as pre-class assignments. A formative evaluation study was conducted using questionnaires and interview methods and students' academic achievements were evaluated by comparing their pre- and post-test scores between FC and conventional units. Students had positive perceptions of the e-learning modules in GBS approach and preferred the structure of learning in the FC format. Students' pre-test scores were slightly higher in the FC units, yet their post-test scores were comparable with conventional units. This study illustrates students' perceptions that the learning was bettered structured in FC and that the out-of-class learning using the GBS approach helped them better prepared for in-class activities.

• Journal of the Chungcheong Mathematical Society
• /
• v.27 no.2
• /
• pp.183-203
• /
• 2014

We examine fundamental units of quadratic function fields from continued fraction of $\sqrt{D}$. As a consequence, we give another proof of geometric analog of Ankeny-Artin-Chowla-Mordell conjecture and bounds for class number, and study real quadratic function fields of minimal type with quasi-period 4.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.146-148
• /
• 2002

An automatic inspection vision systems whose development was the industry applications motor rear side member. This system are connected to the 9 ea camera fur the process inspection the bolt, nuts, units in the rear side member product. This automatic inspection vision systems can perform inspection of not attached the bolt, nuts, units, etc fast and accuracy in react time fashion. And then perform very sophisticated inspection which human workers can not perform.

• Journal of Korean Society for Quality Management
• /
• v.17 no.2
• /
• pp.149-157
• /
• 1989

A one-upper warehouse n-lower retailer inventory model is discussed. The probability distribution of demand for a given perod is independent. The inventory holding cost is proportional to the number of unsold units and the cost of shortages is proportional to the number of shortages. In the event of a shortage, units are redistributed with a cost proportional to the number of units from the retailers which are a surplus at the end of the period. The optimum stock levels are obtained and the effects of redistribution are analized.

• Journal of the Korean Mathematical Society
• /
• v.46 no.4
• /
• pp.675-689
• /
• 2009

As a sequel to the papers [2, 3], we will complete our identification of the groups of units of the finite local rings $\mathbb{Z}_4$[X]/($X^k$ + 2t(X), $2X^{\gamma}$) which is the most general type of finite local rings with a single nilpotent generator over $\mathbb{Z}_4$.