• Mycobiology
• /
• 제32권4호
• /
• pp.173-178
• /
• 2004

Fifteen Rhizobium spp. from nodules of 6 common pulses collected from 6 districts of Assam were studied for their infectivity, intrinsic antibiotic resistance, nitrogenase activity and effect of dual inoculation with two native Arbuscular Mycorrhizal Fungi viz. Glomus mosseae(GM) and Gigaspora gilmarie(GG). Out of the 15 isolates 9 were found nodulation positive and 6 of them(AR1, BR8, BR12, AR10, UR10 & GR21) were subjected to intrinsic antibiotic sensitivity test of which AR1 showed resistance against all the 9 test antibiotics. Isolates AR1 and GR21 showed the highest(4.25 mole, $gm^{-1}hour^{-1}$) and the lowest(1.05 mole, $gm^{-1}hour^{-1}$) nitrogenase activity respectively. In Most Probable Number count, the maximum Rhizobium population $5.8{\times}10^5$, was found in both Blackgram and Greengram variety of pulses. The maximum dry weight of nodules(3.14 g), dry weight of shoot(10.08 g), nitrogen content(7.68 mg, $plant^{-1}$), chlorophyll content(1.89 mg, $g^{-1}$), phosphorus content of shoot(6.17 mg, $g^{-1}$) and yield(535.67 kg, $Ha^{-1}$) were found when AR1 dually inoculated with GM in Blackgram.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.246-255
• /
• 2017

The species composition and variation in abundance of fishery resources near Oenarodo, Go-heung Peninsula, Korea, were investigated by gill net, trap net, and longline in May, July, and October 2015 and 2016. During the study period, the total catch included 14 species in the gill net, 11 species in the trap net, and 4 species in the longline. The dominant species were Portunus trituberculatus and Raja pulchrain the gill net, Charybdis japonicaand and Octopus vulgarisin in the trap net, and Muraenesox cinereusin in the longline. The Catch Per Unit Effort (CPUE) per individual and per weight in the gill net were similar in May and July of 2015 and 2016. In October 2015, the CPUE per individual was 2.1 ind./h and the CPUE per weight was 505 g/h higher than the results in 2016, but there was no significant difference in the total CPUE between 2015 and 2016. In the trap net, the CPUE per weight was similar in both 2015 and 2016, but the CPUE per individual was 2.7 ind./h higher in October 2015 than in October 2016 and the total CPUE was not significantly different from 2015 to 2016. The CPUE per individual and weight in the longline were significantly higher in July and October 2015 than in the same months of 2016, but the total CPUE in 2015 and 2016 did not show a significant difference.

• 대한간호학회지
• /
• 제29권2호
• /
• pp.445-455
• /
• 1999

This study has been conducted on the nonequivalent control group pretest-posttest design in quasi experimental basis and newly born premature infants from intensive care unit of G Medical University Hospital in Inchon Metropolitan were selected in two groups of 21 infants each. The first group for experimental and the other for control. Data has been collected form October 30, 1997 to August 29, 1998. For the experimental group tactile and kinesthetic stimulation was applied 2 times a day for 10 days(10 : 00~11 : 00 hours in the morning and 17 : 00~18 : 00 in the afternoon). As a weight weighing instrument. electronic indicator scale(Cas Co. korea) was used. To determine urine cortisol concentration level in stress hormone, radio immune assay method was used. And high performance liquid chlomatography was used to determine urine norepinephrine, concentration level To determine behavior status, tools developed by Anderson et at(1990) and remodeled by Kim Hee-Sook(1996) were used. Collected data were analyzed with the SAS program using x$^2$-test, student t-test, repeated measures ANOVA and paired t -test. The result were as follow. 1. As for the daily weight gain. the experimental group showed first change in weight and this group also showed higher weight in the average weight than the control group. Statistically, however, there was no significant factor between the two group. 2. The cortisol concentration in urine showed decrease in the experimental group norepinephrine concentration in urine showed increase in both experimental and control groups. No statistical significance was shown between the two groups. 3. In the aspect of behavior status. the experimental group showed statistical significance by showing inactive in the state of alert and conversion to a positive state than the control group. In conclusion, the sensory stimulation in this study showed a positive aspect through there was no statistical significance in the weight gain and urine stress hormone concentration. In the behavior status, there was statistical significance in the frequency of staying inactive in the state of alert and conversion to a positive state.

• Child Health Nursing Research
• /
• 제27권3호
• /
• pp.297-307
• /
• 2021

Purpose: This descriptive study compared the perceived parental stress levels between parents with very low birth weight infants (VLBWIs) and nurses in the neonatal intensive care unit (NICU). Methods: In total, 83 parents of VLBWIs and 78 NICU nurses were enrolled. Data were collected with the Parental Stress Scale (PSS) and analyzed using the t-test and analysis of variance in SAS version 9.4. Results: The average PSS score was 3.31 among parents and 3.45 among nurses. The stress score was significantly higher among nurses with children (t=2.46, p=.016) and senior nurses (t=2.12, p=.037). There was a significant difference in the stress score according to parents' education (t=3.29, p=.002) and occupation (F=3.14, p=.049) in the sights and sounds subscale. Mothers had significantly higher stress scores than fathers in the parental role alterations subscale (t=2.32, p=.023). Parental stress scores were higher than those perceived by nurses in the infant's appearance and behaviors subscale for breathing patterns (t=2.95, p=.004), followed by jerky/ restless behavior (t=2.70, p=.008). Conclusion: Nurses should provide explanations to parents of VLBWIs in order to reduce parental stress about the appearances and behavior of VLBWIs. This is more important than aspect of the NICU environment and education about parental roles.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.899-904
• /
• 2009

This paper presents the analysis result of load-transfer mechanism and pile movements associated with the development of frictional resistance to understand the engineering characteristics of micropile behavior. An field load tests were performed for two different types of micropiles and they are (i) thread bar reinforcement with D=50mm and (ii) hollow steel pipe reinforcement with $D_{out}$=82.5mm and $D_{in}$=60.5mm and wrapped with woven geotextile for post-grouting. The load test results indicated that micropiling with pressured grouting provided better load-transfer characteristics than micropiling with gravity grouting under both compressive and tensile loading conditions in that unit skin frictional resistance is well distributed along installation depth. The unit weight and unconfined compressive strength of cured grout were obtained for each piling method. The strength and unit weight of micropile with pressured grouting was higher than those with gravity grouting. The fact that load bearing quality with pressured grouting is better than that of gravity grouting could be attributed to the dense mutual adhesion between surrounding ground and pile due to pressurized grouting method and better grout quality.

• 지질공학
• /
• 제19권4호
• /
• pp.493-499
• /
• 2009

우리나라는 암석자원이 풍부하기 때문에 콘크리트표면 차수벽형 석괴댐(CFRD)의 시공이 증가하고 있는 실정이다. 콘크리트표면 차수벽형 석괴댐에서의 표층부 기초지반인 Bedding Zone 구간은 콘크리트 차수벽을 균등하게 지지할 수 있는 지지력과 콘크리트 차수벽의 누수시 세립토의 유실을 억제할 수 있는 차수성을 유지하여야 한다. 따라서 Bedding Zone 구간의 차수성 확보 여부가 댐의 안정성을 좌우하는 주요 요인이 될 수 있다. 본 연구에서는 기존의 시방서에 제시된 Zone-1 구간의 설계입도분포를 만족하는 시험재료를 선정한 후, 차수성을 평가하기 위하여 실내시험을 실시하였다. 시험 분석 결과 투수계수, 건조단위중량 및 흙의 입도분포에 따른 차수효과의 상관관계를 제시하였다. 특히, 투수계수와 건조단위중량의 상관관계, No. 4체 중량통과백분율과 투수계수 관계가 제시되었고, 또한 시간경과에 따른 투수계수의 변화도 제시되었다.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.23-28
• /
• 2008

A high speed automated pitch variation unit (HAPU) related to semiconductor category sorting movement of the test handler system was developed. In the design process, 'DMADOV' step of 6-Sigma method has been applied. The design result for the desirable pitch variation was a 3:1 reduction rack-pinion and a linkage which are operated by servomotors. The realization and reliability of the mechanism was obtained at the design stage by FEM analysis, and by robust design using Taguchi orthogonal array against weight and deformation. Finally, the validity of the high speed variation mechanism was confirmed via inspection using a high speed camera while performing pitch variation.

• 한국어류학회지
• /
• 제23권3호
• /
• pp.206-216
• /
• 2011

To investigate seasonal and yearly variation of fishes composition in Yeoja Bay of Korea, fisheries survey were carried out using beam trawl from 2006 to 2009. A total of 44 fish species were collected. The major dominant species were Pennahia argentatus, Thryssa adelae, Thryssa kammalensis and Cynoglossus joyneri, which were occupied over 63% total individuals, and 50% of wet weight. The diversity index (H') was about 1.62 (1.46~1.77) by seasons, and seasons of similarity by fishes were divided into two groups, which were March with December and June with September. ANOVA test showed that there were not significant difference between individuals and catch weight (kg) per unit area (km$^2$) by year and season, except for catch weight per unit area by season.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.230-237
• /
• 2000

The wheel bearing in vehicles has been improved to unit module by joining a bearing to a hub in order to achieve weight reduction and easy assembly. Currently, the contact force between a raceway and balls of a bearing is applied as the external force in order to analyse the structure of the unit type bearings. In this paper, simplified boundary conditions are discussed for structure analysis of wheel bearing unit. From the procedure, the contact conditions of balls and race in wheel bearing unit are considered as equivalent non-linear spring elements. The end node of a spring element is constrained in displacement. And the external force of boundary conditions is applied at the contact point between tire and road. For the evaluation of this analysis, its results for the force of spring elements are compared with contact forces of calculated results. and also maximum equivalent stresses of analysis are compared with results of test at the flange of inner ring. The analysis results with proposed boundary conditions are more accurate than results from analysis which is generally used.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.169-174
• /
• 2003

Design of a rational earth volume conversion coefficient is required as the earth volume conversion coefficient may give great influence on construction work volume and construction costs in the civil engineering works where large-scaled earth volume is excavated. However, there are a great deal of difficulties in the calculation of the exact spoil surface earth and Insufficient earth volume by adopting the figures presented on the generally used design specifications which are not the results obtained from the selection tests in calculating the earth volume conversion coefficient. In this connection, it would be desirable to calculate the earth volume conversion coefficient by carrying out large-scaled site test adequate for the relevant environment. In consequence, this study aims at calculating the exact earth volume conversion coefficient of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative exactness degree of the crossing was calculated at 0.5% in average. The relative exactness degree of 0.5% in the volume may be judged as an exact measurement as it corresponds to 0.17% of the relative exactness degree in the length measurement. We have calculated the exact earth volume conversion coefficient by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with the earth volume conversion coefficient determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of earth volume conversion coefficient, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.