• 한국건설관리학회논문집
• /
• 제10권3호
• /
• pp.92-101
• /
• 2009

초고층건물의 외장재로 많이 사용되고 있는 자재는 경량이면서도 실내환경 영향요소의 흐름을 조절/차단하는 필터기능이 탁월한 알루미늄 커튼월이다. 초고층건물 커튼월의 설계와 관련된 CMr의 역할에는 커튼월의 구조적 적정성 검토가 포함되며 이를 위해서는 커튼월을 구성하고 있는 각종 자재들의 물성, 다양한 커튼월시스템 구성방식의 이해와 더불어 구조설계가 필요한 구조부재의 종류, 구조설계 프로세스, 적정성 판단 설계요소 등에 대한 복합적 이해가 필수적이다. 본 연구는 CMr가 커튼월 구조설계의 적정성을 간편하게 검토할 수 있는 구조설계 검토프로세스를 도출하고 커튼월 구조부재인 멀리언 (수직재), 트랜섬 (수평재) 구조설계의 적정성을 쉽게 검토할 수 있는 구조설계검토 매뉴얼 개발을 목적으로 한다. 개발된 매뉴얼의 적용성을 검토하기 위해 동 매뉴얼을 실제 커튼월 설계프로젝트에 적용하여 보았으며 커튼월 설계전문가 및 CMr와 워크샵 설시하여 매뉴얼의 개선방향을 모색하였다.

• 한국강구조학회 논문집
• /
• 제10권3호통권36호
• /
• pp.553-564
• /
• 1998

최근도심지의 극심한 교통체증의 해소를 위한 방안으로 2층도로 강구조 덱 시스템의 채택이 증가하고 있다. 그 주된 이유는 신속한 시공과 콘크리트덱에 비하여 자중의 감소효과가 크고 보다 큰 강도와 효율적인 가설이 가능하기 때문이다. 본 연구의 목적은 강구조 덱 시스템의 최적설계프로그램을 이용한 2층도로용 강구조 덱 시스템의 가장 합리적인 형식 결정에 관한 연구이다. 최적화의 목적함수는 최소 초기비용으로 정식화하였다. 설계 제약조건은 도로교시방서의 ASD설계기준에 맞추어 정식화하였으며 최적설계과정은 두 단계로 이루어져 있다. 첫 번째 단계는 박스 또는 플레이트주형에 대한 강구조 덱 시스템의 최적설계가 수행된다. 그리고 두 번째 단계에서 개단면 또는 폐단면리브를 갖는 강상판에 대하여 최적설계를 한다. 최적설계 프로그램의 구조해석은 주형에 대하여 격자해석 모델링을 이용하였고 강상판에 대해서는 Pelican-Esslinger법을 사용하였다. 최적화 기법은 SQP를 이용하였다. 적용 예의 각 형식별 강구조 덱 시스템의 최적설계 결과의 비교를 통하여 비용의 효율성을 검토하였고 폐단면리브를 가지는 직선 형상의 박스거더 형식이 가장 효율적이고 경제적으로 판단된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.776-781
• /
• 2008

A ground heat exchanger in a GSHP system is an important unit that determines the thermal performance of a system and its initial cost. The Size and performance of this heat exchanger is highly dependent on the thermal properties. A proper design requires certain site-specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This paper is part of a research project aiming at constructing a database of these site-specific properties, especially ground effective thermal conductivity. The objective was to develop and evaluation method, and to provide this knowledge to design engineers. To achieve these goals, thermal response tests were conducted using a testing device at nearly 150 locations in Korea. The in-situ thermal response is the temperature development over time when a known heating load imposed, e.g. by circulating a heat carrier fluid through the test exchangers. The line-source model was then applied to the response test data because of its simplicity. From the data analysis, the range of ground effective thermal conductivity at various sites is $1.5{\sim}4.0\;W$/mK. The results also show that the ground effective thermal conductivity varies with grouting materials as well as regional geological conditions and groundwater flow.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.381-384
• /
• 2004

Delaying and objection for the construction of storage spent-fuel disposal has prompted to consider expanding on-site storage of spent reactor fuel since it can eliminate the need for costly and difficult shipping and control of the spent fuel completely under the direction of the owner-utility. The dry storage unit developed in Canada can accommodate Korea heavy water reactor fuel elements and become a candidate for the Korean market. In this paper, finite element analyses were carried out in order to investigate the structural behavior of the nuclear spent fuel dry storage system, which is subjected to impact loads such as collision of a truck load and dropping of flask under the irregular operation.

• 한국환경복원기술학회지
• /
• 제22권6호
• /
• pp.115-124
• /
• 2019

In a climate change environment where heat damage and drought occur during a rainy season such as in 2018, a vegetation-based LID system that enables disaster prevention as well as environment improvement is suggested in lieu of an installation-type LID system that is limited to the prevention of floods. However, the quantification of its performance as against construction cost is limited. This study aims to present an experiment environment and evaluation method on quantitative performance, which is required in order to disseminate the vegetation-based LID system. To this end, a 3^rd quartile huff time distribution mass curve was generated for 20-year frequency, 60-minute probable rainfall of 68mm/hr in Cheonan, and effluent was analyzed by recreating artificial rainfall. In order to assess the reliability of the rainfall event simulator, 10 repeat tests were conducted at one-minute intervals for 20 minutes with minimum rainfall intensity of 22.29mm/hr and the maximum rainfall intensity of 140.69mm/hr from the calculated probable rainfall. Effective rainfall as against influent flow was 21.83mm/hr (sd=0.17~1.36, n=20) on average at the minimum rainfall intensity and 142.27mm/hr (sd=1.02~3.25, n=20) on average at the maximum rainfall intensity. In artificial rainfall recreation experiments repeated for three times, the most frequent quartile was found to be the third quartile, which is around 40 minutes after beginning the experiment. The peak flow was observed 70 minutes after beginning the experiment in the experiment zone and after 50 minutes in the control zone. While the control zone recorded the maximum runoff intensity of 2.26mm/min(sd=0.25) 50 minutes after beginning the experiment, the experiment zone recorded the maximum runoff intensity of 0.77mm/min (sd=0.15) 70 minutes after beginning the experiment, which is 20 minutes later than the control zone. Also, the maximum runoff intensity of the experiment zone was 79.6% lower than that of the control zone, which confirmed that vegetation unit-type LID system had rainfall runoff reduction and delay effects. Based on the above findings, the reliability of a lab-level rainfall simulator for monitoring the vegetation-based LID system was reviewed, and maximum runoff intensity reduction and runoff time delay were confirmed. As a result, the study presented a performance evaluation method that can be applied to the pre-design of the vegetation-based LID system for rainfall events on a location before construction.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.10-16
• /
• 2008

In this paper, the authors benchmark a servo valve model for the fuel supply system of Auxiliary Power Unit (APU) in the KHP helicopter. This valve is directly driven with a torque motor, and the size of small gap controlled by a flapper can make change of flow rate under given pressure drop between inlet and outlet. CFD analyses using a commercial code, ANSYS-CFX 10 are performed for the series of three-dimensional models at various openness conditions. The computational results on simplified models show that CFD can play a fine roll in the design of flow path as well as in the estimation of flow force due to its precision and good repeatability. Consequently, the CFD analysis helps valve designers to understand its flow characteristics from the basis of physical fundamentals.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.120-131
• /
• 2005

Statement of problem. More than 70% of patients who need the implant supported restoration are parially edentulous. The principles of design for implant supported fixed partial denture in mandibular posterior region are many and varied. Jurisdiction for their use is usually based on clinical evaluation. There are several areas or interest regarding the design of implant supported fixed partial denture in mandibular posterior region. 1) Straight and tripod configuration in implant placement, 2) Two restoration types such as individualized and splinted restorations. Purpose. The purpose of this study was to compare the amount and distribution of stress around the implant fixtures placed in the mandibular posterior region with two different arrangements and to evaluate the effects of splinting using the photoelastic stress analysis. Material & methods. 1) Production of study model: Mandibular partially edentulous model was waxed-up and duplicated with silicone and two models were poured in stone. 2) Fixture installation and photoelastic model construction: Using surveyor(Ney, USh), 3 fixtures(two 4.0 $\times$13 mm, one 5.0$\times$10 mm, Lifecore, USA) were insta)led in straight & tripod configurations. Silicone molds were made and poured in photoelastic resin (PL-2. Measurements group, USA). 3) Prostheses construction: Four 3-unit bridges (Type III gold alloy, Dongmyung co., Korea) were produced with nonhexed and hexed UCLA abutments and fitted with conventional methods. The abutments were tightened with 30 Ncm torque and the static loads were applied at 12 points of the occlusal surface. 4) Photoelastic stress analysis : The polarizer analyzer system with digital camera(S-2 Pro, Fujifilm, Japan) was used to take the photoelastic fringes and analysed using computer analysis program. Results. Solitary hexed UCLA restoration developed different stress patterns between two implant arrangement configurations, but there were no stress transfer to adjacent implants from the loaded implant in both configurations. However splinted restorations showed lesser amount of stresses in the loaded implants and showed stress transfer to adjacent implants in both configurations. Solitary hexed UCLA restoration with tripod configuration developed higher stresses in anterior and middle implants under loading than implants with straight configurations. Splintied 3 unit fixed partial dentures with tripod configuration showed higher stress development in posterior implant under loading but there were no obvious differences between two configurations. Conclusions. The tripod configuration of implant arrangement didn't show any advantages over the straight configuration. Splinting of 3 unit bridges with nonhexed UCLA abutments showed less stress development around the fixtures. Solitary hexed UCLA restoration developed tilting of implant fixture under offset loads.

• 한국건설관리학회논문집
• /
• 제14권4호
• /
• pp.84-96
• /
• 2013

최근 건설 산업의 디지털화로 인하여 건축 디자인이 정형에서 자유로운 비정형 형태로 변화하고 있다. 특히, 국내에서는 최근 비정형이 디자인 경향으로 도입되어 현상설계, 턴키 등에서 설계 당선을 위한 디자인 요소로 많이 적용되고 있다. 그러나 기존의 정형 건축물의 외벽공법을 비정형 건축물의 외피에 그대로 적용함으로써 누수 및 크랙 등 다양한 하자가 발생하고 있다. 이러한 문제점을 개선하고 공사기간과 공사비를 최소화할 수 있는 비정형 건축물의 설계와 시공이 새로운 기술로 도입되고 있다. 이에 본 연구는 비정형 외피시스템 구현을 위한 공법을 국내외 비정형 건축물의 외피시스템 사례 분석을 통하여 실증적으로 시사점을 도출하고 비정형 건축물 외피시스템의 설계와 시공시 고려해야 할 사항을 다음과 같이 제시하였다. 첫째, 시공성을 고려한 비정형 형태의 설계가 되도록 하여야 한다. 둘째, 2방향 곡면을 정확히 구현할 수 있는 단위 패널 생산 기술의 개발이 필요하다. 셋째, 비정형 콘크리트 외피용 노출 콘크리트 거푸집을 개발하여야 한다. 넷째, 외피 시스템을 부위별로 구분하여 우수처리와 방수를 위한 재료와 공법 특성과 유지관리 방안을 고려하여야 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.79-80
• /
• 2023

Reinforced concrete structures require large amounts of concrete and rebar in the construction stage. Rebar is a major resource for reinforced concrete structures, and generates more CO₂ per unit weight than other materials. To solve this problem, it was confirmed that the cutting waste can be close to zero when the special length of the rebar is calculated in the drawing created after structural design. However, a system for automatically calculating the length of reinforcing bars to efficiently calculate the total amount of reinforcing bars has not been established. Therefore, the objective of this study is a basic study of automatic rebar length estimate algorithm of bearing wall by using BIM-based shape codes built in Revit. The bearing wall rebar can be automatically derived using the developed model. Furthermore, through applying the developed model to the construction field, it will greatly contribute to reducing greenhouse gas emissions by reducing rebar cutting waste.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.155-162
• /
• 2007

The purpose of this comparative study is to analyze the characteristics of art museums of Louis I. Kahn. Kahn's main architectural thoughts of 'what it wants to be' and 'how it was done' act as a basis for this research. 'What it wants to be' means the existence of architecture and relates to the concept of 'room'. 'How it was done' shows the tectonic aspects of architecture and construction process to enhance its presence. Detailed items from these two thoughts applied to clarify the order in dynamics, the visualization of construction process, and the relationship between structure and light in the space of Kahn's art museums. Yale university art gallery was the first major project of Kahn and he showed tectonic characters through tetrahedral concrete slab. The unity of structure, space and light can be found in the Kimbell art museum through the vaulted structural unit. Yale center for British art is the best example of the concept of 'room' and 'tectonic' because it clearly shows the unity of spatial and structural system, and their relation to light. As a result, this study tries to find out that Kahn had consistently developed his thoughts of'room' and 'tectonic', and tried to keep them in his art museum designs.